Commit Graph

36 Commits

Author SHA1 Message Date
Ulf Samuelsson 77accb2f3d Olimex-ARM-USB-OCD-H: Add udev rule
Change-Id: Ifc9a1f7fa9445e05560c335b5bba3a33caeccc51
Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
Reviewed-on: http://openocd.zylin.com/288
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23 09:36:49 +00:00
Spencer Oliver 6eb18b307a contrib: stm32f2x use std naming rules
Change-Id: I109297aa480b3474f1251571cb8e1a0baa1442fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/195
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-17 22:48:52 +00:00
Kyle Manna 86e3cd20dd contrib: Add udev rules for TI xds100v2 debugger
This corrects permissions on the FTDI chip on the xds100v2 debugger
enabling normal users to access it.

Change-Id: I0f6618692ebdee6284eee28f9e612e68782c4d78
Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Reviewed-on: http://openocd.zylin.com/188
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-09 16:31:36 +00:00
Spencer Oliver e74a081a1a flash: update luminary device table
add support for checking target against the device CLASS rather
then just the PARTNO.

This change also adds the new LM4F family (Blizzard).

Change-Id: Ia9d1e33f1f1c2817c0039a2232ecf932fae072f9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/161
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-11-08 21:52:17 +00:00
Uwe Hermann 498662e2e5 Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13 22:29:28 +00:00
Spencer Oliver 43689d3371 contrib: remove extra lf
Change-Id: I6e16010e13ad2ea0cdff99b2e8805c74bcd0eb56
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-11 13:01:22 +01:00
Andreas Fritiofson 92b14f8ca9 stm32f1x: use async algorithm in flash programming routine
Let the target algorithm be running in the background and buffer data
continuously through a FIFO. This reduces or removes the effect of latency
because only a very small number of queue executions needs to be done per
buffer fill. Previously, the many repeated target state changes, register
accesses (really inefficient) and algorithm uploads caused the flash
programming to be latency bound in many cases. Now it should scale better
with increased throughput.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-10-09 00:00:53 +02:00
Eugeniy Meshcheryakov e42363c0f6 Add udev rules for openmoko neo1973 debug board 2011-10-08 23:04:27 +02:00
Clément Burin des Roziers da8ce5f2e1 STM32L: Added flash driver and target
Added the flash driver for the STM32L family, which highly differ from the STM32F family.
Added the TCL target file for JTAG access.
2011-10-03 18:42:39 +02:00
Luca Bruno 8d40b03ba3 contrib: fix udev rules for tty based adaptors
Most serial adaptors are identified by udev with SUBSYSTEM=tty and
without DEVTYPE. This patch fix udev rules to work with any listed
tty-based adaptor. It has been tested with a FTDI-based Bus Pirate.

Signed-off-by: Luca Bruno <lucab@debian.org>
2011-09-16 10:03:34 +02:00
Øyvind Harboe 5ca7cbe2d2 stm32x: add support for STM32F20x
ready for wider testing and comments on basic erase + programming.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-02-04 10:55:43 +01:00
Eric Wetzel a727418184 stellaris: automatically generate and update device IDs
Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs

Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs
2011-01-19 08:41:03 +01:00
David Brownell 7ec55eb863 present CM3 Trace agenda 2011-01-09 21:14:57 +01:00
Spencer Oliver 7351eecf6a loader: update loader src for armv7-m arch
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06 10:35:02 +00:00
Jonathan Dumaresq 9f408db29d Add the contrib file for the armv7m arch
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-06 08:04:58 +01:00
Spencer Oliver 83e5aaf577 stm32: add dual flash bank support
This patch adds the initial dual flash bank support for devices such
as the stm32xl family.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-23 12:11:13 +00:00
Spencer Oliver 921f40f62a contrib: change stm32 flash loader extension
As the stm32 flash loader now uses the preprocessor change extension
so that it used by default.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-23 12:11:12 +00:00
Michael Trensch 6839618062 Add support for Hilscher netX controllers 2010-12-18 21:11:57 +01:00
Spencer Oliver cbf48bed6a contrib: add source to the cfi flash loaders
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10 19:37:39 +00:00
Spencer Oliver 9a76c68563 contrib: make sure loaders use correct arch
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10 13:42:29 +00:00
Freddie Chopin 015bf55944 Add comments and tiny improvements to STM32 flash loader algorithm
Add comments to assembly flash loader for STM32. Add tiny improvement in
size of the algorithm (40 vs 48 bytes) and tiny speed improvement (~1.5%,
as time is wasted on waiting for end of operation anyway).

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-11-15 09:17:14 +01:00
Spencer Oliver 1fafb669c9 contrib: add ram loader src code
Add src code for ram loaders to contrib directory.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-28 09:19:37 +01:00
Johannes Stezenbach 6d4abe906f update udev rules for new udev version
New versions of udev (148+) emit the following warnings:

udevd[425]: BUS= will be removed in a future udev version,
  please use SUBSYSTEM= to match the event device, or
  SUBSYSTEMS= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:1
udevd[425]: SYSFS{}= will be removed in a future udev version,
  please use ATTR{}= to match the event device, or
  ATTRS{}= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:4
udevd[425]: SYSFS{}= will be removed in a future udev version,
  please use ATTR{}= to match the event device, or
  ATTRS{}= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:7
...

See also http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560141

[dbrownell@users.sourceforge.net: add IDs for Stellaris ICDI, Olimex Tiny-H]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-05 01:54:06 -08:00
Yauheni Kaliuta 6a2fd7cad5 Cleanup: nuke trailling whitespaces
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
2009-10-13 19:16:57 +02:00
oharboe baa63aa608 Xiaofan Chen <xiaofanc@gmail.com> retire obsolete patch. OpenOCD only supports 0.14 and newer and the patch was for 0.14.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-12 19:31:13 +00:00
zwelch 0682afece8 Uwe Hermann <uwe@hermann-uwe.de>: Make ICEbear look like other targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@1584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-30 21:04:34 +00:00
zwelch 851f9b2d6c Add udev rules for USB ICEbear interface.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1570 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-29 18:26:11 +00:00
oharboe 5df0a88e01 eol-style native
git-svn-id: svn://svn.berlios.de/openocd/trunk@1550 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-28 06:29:32 +00:00
oharboe 843023f9ff Uwe Hermann <uwe@hermann-uwe.de> Update udev file
git-svn-id: svn://svn.berlios.de/openocd/trunk@1522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-24 12:12:36 +00:00
duane e211e4c6d2 Patch from Dimitar Dimitrov adding support for Olimex ARM-JTAG-EW
git-svn-id: svn://svn.berlios.de/openocd/trunk@1402 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-08 15:14:18 +00:00
kc8apf 3b4d5ae050 Add udev rules to contrib. Courtesy of Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1354 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-21 04:13:16 +00:00
oharboe 0c160046d7 Kees Jongenburger <kees.jongenburger@gmail.com> - now compiles
git-svn-id: svn://svn.berlios.de/openocd/trunk@1201 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-02 07:22:53 +00:00
ntfreak a5806d21d2 - remove build warnings from mips_m4k.c and arm11.c
- reformat whitespace arm11.c[ch]
- add missing svn props from mips32_dmaacc.[ch]

git-svn-id: svn://svn.berlios.de/openocd/trunk@1032 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-08 20:16:51 +00:00
oharboe eadd49bef0 Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> libdcc bugfixes + trace point function
git-svn-id: svn://svn.berlios.de/openocd/trunk@1028 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-08 05:05:57 +00:00
ntfreak 8bf24de7b3 - added info about libftdi support under win32
git-svn-id: svn://svn.berlios.de/openocd/trunk@638 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-02 09:35:48 +00:00
ntfreak 37d850564f - contrib directory added
- libdcc added as example for dcc comms with openocd target_request debugmsgs

git-svn-id: svn://svn.berlios.de/openocd/trunk@426 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-01 20:51:26 +00:00