Right after target halt, some activities needs to be done
such as printing exception reason, disable wdts and reading
debug stubs information.
Missing activities will be submitted in the next patches.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I27aad5614d903f4bd7c8d6dba6bfb0bdb93ed8dc
Reviewed-on: https://review.openocd.org/c/openocd/+/7757
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ifb0122f3b98a767f27746409499733b70fb7d0e8
Reviewed-on: https://review.openocd.org/c/openocd/+/7747
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I36c86fe4ebc99928ce48a5bff8cb9580a0fa3ac0
Reviewed-on: https://review.openocd.org/c/openocd/+/7746
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9181737d83eeba4e983b6a455b8a1523f2576dd2
Reviewed-on: https://review.openocd.org/c/openocd/+/7745
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Consolidate commonly used commands and variables from
chip config files into functions in esp_common.cfg.
This includes "jtag newtap," "target create,"and "configure -event."
Enhances code reusability and simplifies maintenance.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9e8bf07a4a15d4544ceb564607dea66837381d70
Reviewed-on: https://review.openocd.org/c/openocd/+/7744
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
See section 57.6.1 in RM0432.
Change-Id: Ic4977aee74d1838f420c1d9ff19925d09f8f6e2b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7763
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add more ultrascale devices. Set instruction codes for SSI devices
such that refresh/program read_stat and user registers will work.
Change-Id: Id0a0706f4016eb8a4732725a5b72ae61efd73421
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7716
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Adding a single file for each different ir-length.
Change-Id: Iba3dd55b91c28fdb4d0cafa1ededd939fe61a267
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7715
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
STLINK-V3PWR is both a standalone debugger probe compatible with
STLINK-V3 and a source measurement unit (SMU).
Link: http://www.st.com/stlink-v3pwr
This code adds support for the debugger probe functionality.
Change-Id: Ib056e55722528f922c5574bb6fbf77e2f2b2b0c1
Signed-off-by: Laurent LEMELE <laurent.lemele@st.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7755
Tested-by: jenkins
To start a ipdbg server one needs to know the tap and the
instruction code to reach the IPDBG-Hub. This instruction is
vendor/family specific. Knowledge which can be provided by the
pld driver.
Change-Id: I13eeb9fee895d65cd48544da4704fcc9b528b869
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use configurable virtex pld driver to add support for more
xilinx fpga families.
Change-Id: Iff10c8c511787734fa289bdba15f03131d51e071
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7352
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch fixes the handling of errno by setting the sys_errn
only if error has actually occurred during the semihosting call.
It also fixes few issues where error was not set in the first place.
Change-Id: I2fbe562f3ec5e6220b800de04cd33aa1f409c7a0
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7730
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch introduces function semihosting_opcode_to_str() which
converts semihosting opcodes to strings. This function is then
used in debug messages to improve log analysis and troubleshooting.
Change-Id: Iffea49dae13d6a626ae0db40d379cba3c9ea5bd3
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7726
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The current cJTAG to JTAG switching commands for TI chips are not
particularly reliable, especially on chips with accurate timing.
On a Raspberry Pi the existing sequence has (depending on cabling and
chip) a ~50% chance of working, on a much better-behaved FT2232H
it doesn't manage to enable full JTAG at all.
This change runs a bunch of test-idle cycles before actually attempting
to switch to full JTAG. This makes the switch reliable even at high
clock speeds (>100kHz) and from precise sources like the FT2232H.
Change-Id: I9293e884bf3e9606d529756ae4483b844d3c39db
Reported-by: Phil Wiggum <p1mail2015@mail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/375/
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-on: https://review.openocd.org/c/openocd/+/7419
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The original document from Jedec does not report the entry for
"21 NXP (Philips)", replaced by "c". It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I30215c4ff08d5f112305cde6ab7a3176cdcef948
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7727
Tested-by: jenkins
On Windows, isatty() can return any non-zero value if it's an interactive
device. Which diverges from the ARM semihosting specification. This patch
introduces a fix to make the SYS_ISTTY operation conform to spec.
Change-Id: I9bc4f3cb82370812825d52419851910b3e3f35cc
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7725
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The old implementation of gdb socket error handling
in the gdb_get_char_inner() differs between Windows and *nix
platforms. This patch simplifies it by using an existing
function log_socket_error() which handles most of the platform
specific things. It also provides better error messages.
Change-Id: Iec871c4965b116dc7cfb03c3565bab66c8b41958
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7724
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added debug prints to show what is the target debug reason. Also added
debug print for Ctrl-C response. This is useful for troubleshooting and
log analysis.
Change-Id: I055936257d989efe7255656198a8d73a367fcd15
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7720
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch adds support for the NXP QN908x family of Bluetooth
microcontrollers, such as the QN9080. This chip features a Cortex-M4F
with 512 KiB of flash on all the available versions, although the
documentation suggests that there might be 256 kB versions as well.
The initial support allows to read, erase and write the whole user flash
area. Three new sub-commands under the new "qn908x" command are added
in this patch as well: disable_wdog to disabled the watchdog,
mass_erase to perform a mass erase and allow_brick to allow programming
images that disable the SWD interface.
Disabling the watchdog is required after a "reset halt" in order to run
the CRC algorithm from RAM when verifying the chip. However, this is not
done automatically on probing or other initialization since disabling
the watchdog might interfere with debugging real applications.
The "mass_erase" command allows to erase the whole flash without
probing it, since in some scenarios the chip can be locked such that no
flash or ram can be accessed from the SWD interface, allowing only to
run a mass_erase to be able to flash the program.
The flashing process allows to compute a checksum, similar to the
lpc2000 driver "calc_checksum" but done over a different region of the
memory. This checksum is required to be present for the QN908x
bootloader ROM to boot, and otherwise is useless. As with the lpc2000
design, verification when using "calc_checksum" is expected to fail if
the checksum was not valid in the image being verified.
This was manually tested on a QN9080, including the scan-view,
AddressSanitizer/UBSan and test coverage configurations.
Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b
Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: iosabi <iosabi@protonmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5584
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This change adds the extensa sample target and board configurations.
it removes the obsoleted vd_xtensa_jtag.cfg from targets.
Change-Id: I9d4d25abde46c0b15e5211a973012447872cb405
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7723
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change implements the predefined type tap_state instead of generic
uint8_t in the driver
Change-Id: I3478e8d7b40b961f3ba77711179016cdcc35cd32
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7722
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change fixes endianness support in the driver.
Change-Id: Ida360bb58e988cea0a66fdc79e1610b528846fc4
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7721
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang reports that 3rd function call argument is an uninitialized value
file esp32_apptrace.c line:1270
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I73e254d4eb0c6b3152229717d8827d334784ab92
Reviewed-on: https://review.openocd.org/c/openocd/+/7719
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Initialize clocks to max speed and setup SDRAM. NAND support is still
incomplete. Originally found at:
elinux.org/index.php?title=Calao_Atmel_AT91_development_board&oldid=73933
Updated the code from 2011 and improved it a bit.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change-Id: I83474e07c8de8cc3b5d058029551935549693ef9
Reviewed-on: https://review.openocd.org/c/openocd/+/7578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang is unable to fully track the content of the array
write_buffer[] and incorrectly complains that it could contain
some uninitialized value.
To help clang to track the execution flow, rewrite the handling of
the buffer by using simpler indexing and by moving away cmd_byte
from the first buffer's element to the variable cmd_byte.
While there:
- fix the error codes returned while parsing the command line and
- use directly command_print_sameline() instead of passing through
intermediate buffers.
Change-Id: I1969e896887ea3a4abebee057cc04c03005fa57c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7718
Tested-by: jenkins
Clang 15.0.7 complains about snprintf output truncation due to
output between 13 and 22 bytes into a destination of size 20.
Increase the size of the buffer.
Change-Id: I0369255ca1bc02a0cf494f765e91a608c960a0d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7717
Tested-by: jenkins
Value in the 'dscsr' variable is garbage until the DAP queue is run.
Postpone evaluation of the 'secure_state' variable. Reading the
core registers in between will execute the DAP queue.
Change-Id: I44959e882dbafb1b9779e813c3d13f3b3dbcd47f
Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7693
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The registers pauth_dmask and pauth_cmask are not accessible in
AARCH32 mode. Tagging them as 'hidden' is not enough and triggers
error:
Failed to read pauth_dmask register
while halting the core.
Tag the pauth registers as not existing, unless required by user.
Note: for non existing registers there should be no need to
allocate their register cache. Let's keep this for a further
improvement.
Change-Id: Iaa0d006a3d8ee611ee93333ed49a8615a6c94276
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: d0436b0cda ("armv8: Add support of pointer authentication")
Reviewed-on: https://review.openocd.org/c/openocd/+/7712
Tested-by: jenkins
Reviewed-by: Koudai Iwahori <koudai@google.com>
- Manual integration of File-IO support from xt0.2 release
- Verified with applications linked using gdbio LSP
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: Iedc5f885b2548097ef4f11ae1a675b5944f5fdf0
Reviewed-on: https://review.openocd.org/c/openocd/+/7550
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Removed an unused include from src/jtag/adapter.c.
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Change-Id: Ia5ea0acdfa1c011d7c88decd0f63e8032aafd699
Reviewed-on: https://review.openocd.org/c/openocd/+/7687
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag tapisenabled
- jtag tapenable
- jtag tapdisable
While there, add the missing .help and .usage fields and fix the
incorrect check in jtag_tap_enable() and jtag_tap_disable().
Change-Id: I0e1c9f0b8d9fbad19d09610a97498bec8003c27e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7554
Tested-by: jenkins
While there:
- fix memory leak in case of error on values tap->chip,
tap->tapname, tap->expected_ids;
- check for out of memory error;
- fix minor coding style issue;
- add the missing .usage field;
- remove functions not in use anymore.
Change-Id: I1c8c3ffeb324e9eacb919c7e0d94fd72122c9a81
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7431
Tested-by: jenkins
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
While there, add the missing .usage field and remove the now
unused function jim_target_tap_disabled().
Change-Id: I79afcc5097643fc264354c6c3957786a55f40498
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7561
Tested-by: jenkins
The function esp32_cmd_apptrace_generic() is not used outside the
file.
Declare it as static.
Detected through 'sparse' tool.
Change-Id: I08c6b92fb01594320bc3ae6b16067ac4eb51ca12
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7676
Tested-by: jenkins
This reverts commit 047b1a8fc2.
Commit 047b1a8fc2 ("target/image: zero-initialize ELF segments
up to p_memsz") breaks the backward compatibility introducing some
problem:
- an empty bss segment with paddr in SRAM gets zero filled at load
but does not survive after a reset, causing verify to fail;
- an empty bss segment with paddr in FLASH causes excessive flash
usage, which can exceed flash size (causing error) and makes
flash aging faster.
Revert it while looking for a better implementation.
Change-Id: Iaaf926dafce46a220a5bbe20c8576eb449996d76
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7658
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: jenkins
Erhan Kurubas
Antonio Borneo
Daniel Anselmi
Marc Schink
Laurent LEMELE
Marek Vrbka
Lorenz Brun
iosabi
Jacek Wuwer
Wolfram Sang
Dominik Wernberger
Bohdan Tymkiv
Ian Thompson
Jan Matyas