Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
This commit is contained in:
Paul Fertser
parent
9ea7f3d647
commit
f8a6553e82
99
NEWS
99
NEWS
|
|
@ -2,126 +2,29 @@ This file includes highlights of the changes made in the OpenOCD
|
|||
source archive release.
|
||||
|
||||
JTAG Layer:
|
||||
* add default to adapter speed when unspecified (100 kHz)
|
||||
* AM335X gpio (BeagleBones) adapter driver
|
||||
* BCM2835 support for SWD
|
||||
* Cadence Virtual Debug (vdebug) adapter driver
|
||||
* CMSIS-DAP support for SWO and SWD multidrop
|
||||
* Espressif USB JTAG Programmer adapter driver
|
||||
* Remote bitbang support for Windows host
|
||||
* ST-LINK add TCP server support to adapter driver
|
||||
* SWD multidrop support
|
||||
|
||||
Boundary Scan:
|
||||
|
||||
Target Layer:
|
||||
* aarch64: support watchpoints
|
||||
* arm: support independent TPIU and SWO for trace
|
||||
* arm adi v5: support Large Physical Address Extension
|
||||
* arm adi v6: support added, for jtag and swd transport
|
||||
* cortex_a: support watchpoints
|
||||
* elf 64bit load support
|
||||
* Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
|
||||
* semihosting: support user defined operations
|
||||
* Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
|
||||
|
||||
Flash Layer:
|
||||
* Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
|
||||
* GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
|
||||
* Nuvoton NPCX series support
|
||||
* onsemi RSL10 support
|
||||
* Raspberry Pi Pico RP2040 support
|
||||
* ST BlueNRG-LPS support
|
||||
* ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
|
||||
* ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
|
||||
|
||||
Board, Target, and Interface Configuration Scripts:
|
||||
* Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
|
||||
* Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
|
||||
* Digilent Nexys Video board config
|
||||
* Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
|
||||
* Espressif ESP32 via ESP USB Bridge generic board config
|
||||
* Espressif ESP32-S2 Kaluga 1 board config
|
||||
* Espressif ESP32-S2 with ESP USB Bridge board config
|
||||
* Espressif ESP32-S3 example board config
|
||||
* Kontron SMARC-sAL28 board config
|
||||
* LambdaConcept ECPIX-5 board config
|
||||
* Microchip ATSAMA5D27-SOM1-EK1 board config
|
||||
* Microchip EVB-LAN9255 board config
|
||||
* Microchip SAME51 Curiosity Nano board config
|
||||
* NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
|
||||
* NXP RT6XX board config
|
||||
* Olimex H405 board config
|
||||
* Radiona ULX3S board config
|
||||
* Raspberry Pi 3 and Raspberry Pi 4 model B board config
|
||||
* Raspberry Pi Pico-Debug board config
|
||||
* Renesas R-Car V3U Falcon board config
|
||||
* ST BlueNRG-LPS steval-idb012v1 board config
|
||||
* ST NUCLEO-8S208RB board config
|
||||
* ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
|
||||
* ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
|
||||
* ST STM32MP13x-DK board config
|
||||
* TI AM625 EVM, AM642 EVM and AM654 EVM board config
|
||||
* TI J721E EVM, J721S2 EVM and J7200 EVM board config
|
||||
* Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
|
||||
* Cadence Xtensa generic and Xtensa VDebug target config
|
||||
* Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
|
||||
* Espressif ESP32, ESP32-S2 and ESP32-S3 target config
|
||||
* Microchip ATSAMA5D2 series target config
|
||||
* NanoXplore NG-Ultra SoC target config
|
||||
* NXP IMX8QM target config
|
||||
* NXP LS1028A, LS1046A and LS1088A target config
|
||||
* NXP RT600 (Xtensa HiFi DSP) target config
|
||||
* onsemi RSL10 target config
|
||||
* Raspberry Pi Pico RP2040 target config
|
||||
* Renesas R8A779A0 V3U target config
|
||||
* Renesas RZ/Five target config
|
||||
* Renesas RZ/G2 MPU family target config
|
||||
* Rockchip RK3399 target config
|
||||
* ST BlueNRG-LPS target config
|
||||
* ST STM32MP13x target config
|
||||
* TI AM625, AM654, J721E and J721S2 target config
|
||||
* Ashling Opella-LD interface config
|
||||
* Aspeed AST2600 linuxgpiod based interface config
|
||||
* Blinkinlabs JTAG_Hat interface config
|
||||
* Cadence Virtual Debug (vdebug) interface config
|
||||
* Espressif ESP32-S2 Kaluga 1 board's interface config
|
||||
* Espressif USB Bridge jtag interface config
|
||||
* Infineon DAP miniWiggler V3 interface config
|
||||
* PLS SPC5 interface config
|
||||
* Tigard interface config
|
||||
* Lattice MachXO3 family FPGA config
|
||||
|
||||
Server Layer:
|
||||
* GDB: add per-target remote protocol extensions
|
||||
* GDB: more 'Z' packets support
|
||||
* IPDBG JtagHost server functionality
|
||||
* semihosting: I/O redirection to TCP server
|
||||
* telnet: support for command's autocomplete
|
||||
|
||||
RTOS:
|
||||
* 'none' rtos support
|
||||
* Zephyr rtos support
|
||||
|
||||
Documentation:
|
||||
|
||||
Build and Release:
|
||||
* Add json extension to jimtcl build
|
||||
* Drop dependency from libusb0
|
||||
* Drop repository repo.or.cz for submodules
|
||||
* Move gerrit to https://review.openocd.org/
|
||||
* Require autoconf 2.69 or newer
|
||||
* Update jep106 to revision JEP106BF.01
|
||||
* Update jimtcl to version 0.81
|
||||
* Update libjaylink to version 0.3.1
|
||||
* New configure flag '--enable-jimtcl-maintainer' for jimtcl build
|
||||
|
||||
|
||||
This release also contains a number of other important functional and
|
||||
cosmetic bugfixes. For more details about what has changed since the
|
||||
last release, see the git repository history:
|
||||
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
|
||||
|
||||
|
||||
For older NEWS, see the NEWS files associated with each release
|
||||
|
|
|
|||
|
|
@ -0,0 +1,132 @@
|
|||
This file includes highlights of the changes made in the OpenOCD
|
||||
source archive release.
|
||||
|
||||
JTAG Layer:
|
||||
* add default to adapter speed when unspecified (100 kHz)
|
||||
* AM335X gpio (BeagleBones) adapter driver
|
||||
* BCM2835 support for SWD
|
||||
* Cadence Virtual Debug (vdebug) adapter driver
|
||||
* CMSIS-DAP support for SWO and SWD multidrop
|
||||
* Espressif USB JTAG Programmer adapter driver
|
||||
* Remote bitbang support for Windows host
|
||||
* ST-LINK add TCP server support to adapter driver
|
||||
* SWD multidrop support
|
||||
|
||||
Boundary Scan:
|
||||
|
||||
Target Layer:
|
||||
* aarch64: support watchpoints
|
||||
* arm: support independent TPIU and SWO for trace
|
||||
* arm adi v5: support Large Physical Address Extension
|
||||
* arm adi v6: support added, for jtag and swd transport
|
||||
* cortex_a: support watchpoints
|
||||
* elf 64bit load support
|
||||
* Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
|
||||
* semihosting: support user defined operations
|
||||
* Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
|
||||
|
||||
Flash Layer:
|
||||
* Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
|
||||
* GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
|
||||
* Nuvoton NPCX series support
|
||||
* onsemi RSL10 support
|
||||
* Raspberry Pi Pico RP2040 support
|
||||
* ST BlueNRG-LPS support
|
||||
* ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
|
||||
* ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
|
||||
|
||||
Board, Target, and Interface Configuration Scripts:
|
||||
* Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
|
||||
* Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
|
||||
* Digilent Nexys Video board config
|
||||
* Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
|
||||
* Espressif ESP32 via ESP USB Bridge generic board config
|
||||
* Espressif ESP32-S2 Kaluga 1 board config
|
||||
* Espressif ESP32-S2 with ESP USB Bridge board config
|
||||
* Espressif ESP32-S3 example board config
|
||||
* Kontron SMARC-sAL28 board config
|
||||
* LambdaConcept ECPIX-5 board config
|
||||
* Microchip ATSAMA5D27-SOM1-EK1 board config
|
||||
* Microchip EVB-LAN9255 board config
|
||||
* Microchip SAME51 Curiosity Nano board config
|
||||
* NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
|
||||
* NXP RT6XX board config
|
||||
* Olimex H405 board config
|
||||
* Radiona ULX3S board config
|
||||
* Raspberry Pi 3 and Raspberry Pi 4 model B board config
|
||||
* Raspberry Pi Pico-Debug board config
|
||||
* Renesas R-Car V3U Falcon board config
|
||||
* ST BlueNRG-LPS steval-idb012v1 board config
|
||||
* ST NUCLEO-8S208RB board config
|
||||
* ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
|
||||
* ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
|
||||
* ST STM32MP13x-DK board config
|
||||
* TI AM625 EVM, AM642 EVM and AM654 EVM board config
|
||||
* TI J721E EVM, J721S2 EVM and J7200 EVM board config
|
||||
* Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
|
||||
* Cadence Xtensa generic and Xtensa VDebug target config
|
||||
* Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
|
||||
* Espressif ESP32, ESP32-S2 and ESP32-S3 target config
|
||||
* Microchip ATSAMA5D2 series target config
|
||||
* NanoXplore NG-Ultra SoC target config
|
||||
* NXP IMX8QM target config
|
||||
* NXP LS1028A, LS1046A and LS1088A target config
|
||||
* NXP RT600 (Xtensa HiFi DSP) target config
|
||||
* onsemi RSL10 target config
|
||||
* Raspberry Pi Pico RP2040 target config
|
||||
* Renesas R8A779A0 V3U target config
|
||||
* Renesas RZ/Five target config
|
||||
* Renesas RZ/G2 MPU family target config
|
||||
* Rockchip RK3399 target config
|
||||
* ST BlueNRG-LPS target config
|
||||
* ST STM32MP13x target config
|
||||
* TI AM625, AM654, J721E and J721S2 target config
|
||||
* Ashling Opella-LD interface config
|
||||
* Aspeed AST2600 linuxgpiod based interface config
|
||||
* Blinkinlabs JTAG_Hat interface config
|
||||
* Cadence Virtual Debug (vdebug) interface config
|
||||
* Espressif ESP32-S2 Kaluga 1 board's interface config
|
||||
* Espressif USB Bridge jtag interface config
|
||||
* Infineon DAP miniWiggler V3 interface config
|
||||
* PLS SPC5 interface config
|
||||
* Tigard interface config
|
||||
* Lattice MachXO3 family FPGA config
|
||||
|
||||
Server Layer:
|
||||
* GDB: add per-target remote protocol extensions
|
||||
* GDB: more 'Z' packets support
|
||||
* IPDBG JtagHost server functionality
|
||||
* semihosting: I/O redirection to TCP server
|
||||
* telnet: support for command's autocomplete
|
||||
|
||||
RTOS:
|
||||
* 'none' rtos support
|
||||
* Zephyr rtos support
|
||||
|
||||
Documentation:
|
||||
|
||||
Build and Release:
|
||||
* Add json extension to jimtcl build
|
||||
* Drop dependency from libusb0
|
||||
* Drop repository repo.or.cz for submodules
|
||||
* Move gerrit to https://review.openocd.org/
|
||||
* Require autoconf 2.69 or newer
|
||||
* Update jep106 to revision JEP106BF.01
|
||||
* Update jimtcl to version 0.81
|
||||
* Update libjaylink to version 0.3.1
|
||||
* New configure flag '--enable-jimtcl-maintainer' for jimtcl build
|
||||
|
||||
|
||||
This release also contains a number of other important functional and
|
||||
cosmetic bugfixes. For more details about what has changed since the
|
||||
last release, see the git repository history:
|
||||
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
|
||||
|
||||
|
||||
For older NEWS, see the NEWS files associated with each release
|
||||
(i.e. NEWS-<version>).
|
||||
|
||||
For more information about contributing test reports, bug fixes, or new
|
||||
features and device support, please read the new Developer Manual (or
|
||||
the BUGS and PATCHES.txt files in the source archive).
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
AC_PREREQ([2.69])
|
||||
AC_INIT([openocd], [0.12.0],
|
||||
AC_INIT([openocd], [0.12.0+dev],
|
||||
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
|
||||
AC_CONFIG_SRCDIR([src/openocd.c])
|
||||
AC_CONFIG_AUX_DIR([build-aux])
|
||||
|
|
|
|||
Loading…
Reference in New Issue