Added another test build configuration
git-svn-id: svn://svn.berlios.de/openocd/trunk@1290 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
duane
parent
dd2d2ad767
commit
e5e561157c
|
|
@ -0,0 +1,193 @@
|
|||
# -*- mode: makefile -*-
|
||||
#========================================
|
||||
# DO NOT DELETE THE LINE BELOW
|
||||
_default: default
|
||||
# DO NOT DELETE THE LINE_ABOVE
|
||||
#========================================
|
||||
|
||||
#========================================
|
||||
#
|
||||
# There are no user configurable options here.
|
||||
#
|
||||
# All user configurable options are in local.uses
|
||||
#
|
||||
include ./local.uses
|
||||
#
|
||||
#========================================
|
||||
|
||||
#========================================
|
||||
# This is the USB driver for the FTDI2XX chips.
|
||||
# It is a "closed" solution from FTDICHIP.COM
|
||||
# Some claim it is faster then the open/free
|
||||
# solution: win32-libusb+libftdi.
|
||||
#
|
||||
ftd2xx.download:
|
||||
mkdir -p ${VIRGINS}
|
||||
wget -O ${FTD2XX_ZIPFILE_LOCAL} \
|
||||
${FTD2XX_ZIPFILE_URL}
|
||||
|
||||
ftd2xx.unpack:
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
mkdir -p ${FTD2XX_WIN32_DIR}
|
||||
cd ${FTD2XX_WIN32_DIR} && unzip \
|
||||
${FTD2XX_ZIPFILE_LOCAL}
|
||||
|
||||
ftd2xx.build:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
ftd2xx.configure:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
ftd2xx.install:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
clean::
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
|
||||
ftd2xx.all: ftd2xx.unpack ftd2xx.configure \
|
||||
ftd2xx.build ftd2xx.install
|
||||
|
||||
|
||||
#========================================-
|
||||
# LIBFTDI - requires LIBCONFUSE..
|
||||
# So we handle it here :-(
|
||||
|
||||
libconfuse.download:
|
||||
mkdir -p virgins
|
||||
wget -O ${LIBCONFUSE_TARFILE_LOCAL} \
|
||||
${LIBCONFUSE_TARFILE_URL}
|
||||
|
||||
libconfuse.unpack:
|
||||
tar xfz ${LIBCONFUSE_TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBCONFUSE_SRC_DIR}
|
||||
|
||||
libconfuse.configure:
|
||||
rm -rf ${LIBCONFUSE_BUILD_DIR}
|
||||
mkdir -p ${LIBCONFUSE_BUILD_DIR}
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && \
|
||||
${LIBCONFUSE_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBCONFUSE_BUILD_DIR}
|
||||
|
||||
libconfuse.build:
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE}
|
||||
|
||||
libconfuse.install:
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
libconfuse.all: libconfuse.unpack libconfuse.configure \
|
||||
libconfuse.build libconfuse.install
|
||||
|
||||
#========================================
|
||||
# LIBFTDI - the open source (and free)
|
||||
# alternative to (closed) FTD2XX drivers.
|
||||
|
||||
libftdi.download:
|
||||
mkdir -p virgins
|
||||
wget -O ${LIBFTDI_TARFILE_LOCAL} \
|
||||
${LIBFTDI_TARFILE_URL}
|
||||
|
||||
libftdi.unpack:
|
||||
tar xfz ${LIBFTDI_TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_SRC_DIR}
|
||||
|
||||
libftdi.configure:
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
mkdir -p ${LIBFTDI_BUILD_DIR}
|
||||
cd ${LIBFTDI_BUILD_DIR} && \
|
||||
${LIBFTDI_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
|
||||
libftdi.build:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
|
||||
|
||||
libftdi.install:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
libftdi.all: libftdi.unpack libftdi.configure \
|
||||
libftdi.build libftdi.install
|
||||
|
||||
#========================================
|
||||
# Openocd...
|
||||
|
||||
openocd.bootstrap:
|
||||
cd ${OPENOCD_SRC_DIR} && bash ./bootstrap
|
||||
|
||||
openocd.configure:
|
||||
rm -rf ${OPENOCD_BUILD_DIR}
|
||||
mkdir -p ${OPENOCD_BUILD_DIR}
|
||||
cd ${OPENOCD_BUILD_DIR} && ${OPENOCD_SRC_DIR}/configure \
|
||||
--prefix=${INSTALL_DIR} \
|
||||
${OPENOCD_CONFIG_OPTIONS}
|
||||
|
||||
openocd.build:
|
||||
cd ${OPENOCD_BUILD_DIR} && ${MAKE}
|
||||
|
||||
openocd.docs:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE}
|
||||
|
||||
openocd.docs.pdf:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} pdf
|
||||
|
||||
openocd.docs.html:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} html
|
||||
|
||||
# fixme:
|
||||
# need to add a "make one huge html file target"
|
||||
|
||||
openocd.install:
|
||||
cd ${OPENOCD_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
#========================================
|
||||
# The world...
|
||||
|
||||
# Manual step.
|
||||
download.all: \
|
||||
ftd2xx.download \
|
||||
libconfuse.download \
|
||||
libftdi.download
|
||||
|
||||
ifeq (x"${FT2232_DRIVER}",x"ftd2xx")
|
||||
prebuild: ftd2xx.all
|
||||
endif
|
||||
|
||||
ifeq (x"${FT2232_DRIVER}",x"libftdi")
|
||||
prebuild: libconfuse.all libftdi.all
|
||||
endif
|
||||
|
||||
remake: \
|
||||
openocd.bootstrap \
|
||||
openocd.configure \
|
||||
openocd.build \
|
||||
openocd.install
|
||||
|
||||
initial.build : download.all prebuild remake
|
||||
|
||||
all:
|
||||
@echo ""
|
||||
@echo " This makefile does not support an 'all' target"
|
||||
@echo ""
|
||||
@echo " If this is your *FIRST* time building... "
|
||||
@echo " Then use this command: \"make initial.build\""
|
||||
@echo ""
|
||||
@echo " The \"default\" target is for openocd developers"
|
||||
@echo " and rebuilds openocd completely.."
|
||||
@echo ""
|
||||
|
||||
default:
|
||||
test -d ${OPENOCD_SRC_DIR} || (echo "Where is: The OPENOCD source?"; exit 1)
|
||||
${MAKE} remake
|
||||
|
||||
whatis_%:
|
||||
@echo ""
|
||||
@echo "Makevariable: $* => ${${*}}"
|
||||
@echo ""
|
||||
|
|
@ -0,0 +1,59 @@
|
|||
|
||||
This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
|
||||
openocd test purposes on Cygwin. I have included it here so others
|
||||
might also make use of the same configuration that I use to develop
|
||||
Openocd.
|
||||
|
||||
--Duane Ellis
|
||||
|
||||
To make use of it do the following:
|
||||
|
||||
(1) Check out openocd in the standard way.
|
||||
|
||||
For example - in cygwin, type this:
|
||||
|
||||
bash$ mkdir -p /home/duane/test
|
||||
bash$ cd /home/duane/test
|
||||
bash$ svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
|
||||
|
||||
(2) COPY this folder "right above" where you have OpenOCD.
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
bash$ cp ./openocd/testing/build.test2/* /home/duane/test/.
|
||||
|
||||
(3) OPTIONALLY
|
||||
|
||||
You might want to review the file "local.uses"
|
||||
Change options and so forth at the top of the file.
|
||||
|
||||
(4) Initially, you need to download some additional files.
|
||||
These include "libftdi", "libconfuse", and the ftd2xx drivers.
|
||||
|
||||
(5) You also need to build the supporting libraries and install them
|
||||
(They are installed "locally" only)
|
||||
|
||||
Type this command:
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
|
||||
bash$ make initial.build
|
||||
|
||||
which: (1) downloads files
|
||||
(2) builds the libs
|
||||
(3) builds OpenOCD
|
||||
|
||||
(6) As you hack upon OpenOCD... to rebuild OpenOCD...
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
|
||||
bash$ make remake
|
||||
|
||||
which: (1) re-bootstraps
|
||||
(2) re-configures
|
||||
(3) re-builds
|
||||
(4) re-installs.
|
||||
|
||||
=======
|
||||
**END**
|
||||
=======
|
||||
|
||||
|
|
@ -0,0 +1,161 @@
|
|||
# -*- mode: makefile -*-
|
||||
#========================================
|
||||
# DO NOT REMOVE THE LINE BELOW
|
||||
HERE := $(shell pwd)
|
||||
# DO NOT REMOVE THE LINE ABOVE
|
||||
#========================================
|
||||
|
||||
# These are common CYGWIN build settings.
|
||||
# Comment out things you do not want.
|
||||
# Or unComment things you want.
|
||||
|
||||
# PCs always have printer ports...
|
||||
X86_PRINTER_PORT ?= y
|
||||
|
||||
# Chose *ONE* of these three solutions.
|
||||
#FTD2232_DRIVER = none
|
||||
FT2232_DRIVER = ftd2xx
|
||||
#FT2232_DRIVER = libftdi
|
||||
|
||||
# Do you have "libusb" installed?
|
||||
ifeq (x"${FT2232_DRIVER}",x"libftdi")
|
||||
# With LIBFTDI... LIBUSB is manditory.
|
||||
USE_LIBUSB = y
|
||||
endif
|
||||
|
||||
# By default... we assume libusb not present.
|
||||
USE_LIBUSB ?= n
|
||||
|
||||
#========================================
|
||||
# DO NOT EDIT SETTINGS BELOW THIS LINE
|
||||
#========================================
|
||||
|
||||
|
||||
|
||||
#========================================
|
||||
# House keeping...
|
||||
|
||||
# Solve problems on systems with DASH.. Grrr...
|
||||
SHELL=/bin/bash
|
||||
export SHELL
|
||||
|
||||
VIRGINS ?= ${HERE}/virgins
|
||||
INSTALL_DIR ?= $(HERE)/install
|
||||
PREFIX ?= ${INSTALL_DIR}
|
||||
|
||||
# Determine the build platform.
|
||||
BUILD_SYSNAME_Linux =linux
|
||||
BUILD_SYSNAME_linux =linux
|
||||
BUILD_SYSNAME_CYGWIN_NT =cygwin
|
||||
BUILD_SYSNAME_MINGW32_NT =mingw32
|
||||
BUILD_SYSNAME_Darwin =darwin
|
||||
BUILD_SYSNAME_darwin =darwin
|
||||
BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
|
||||
|
||||
# And machine (ie: i686, x86_64, or what ever)
|
||||
BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
|
||||
|
||||
|
||||
#========================================
|
||||
#
|
||||
|
||||
FTD2XX_LINUX_VERSION=0.4.16
|
||||
FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
|
||||
FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
|
||||
|
||||
|
||||
# Wiggler type interfaces are here.
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel
|
||||
|
||||
|
||||
# FTD2XX only supports these
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_none =
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR}
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi
|
||||
|
||||
# LIBUSB - adds support for these.
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
|
||||
|
||||
#========================================
|
||||
# EXPLICITY NOT SUPPORTED INTERFACES
|
||||
#
|
||||
# zy1000.c
|
||||
# This is a standalone hardware box
|
||||
# it is *NOT* a cygwin thing.
|
||||
#
|
||||
# at91rm9200.c
|
||||
# This is a uC/Linux (or linux) that
|
||||
# runs uC/Linux and uses the gpio pins
|
||||
# to bit-bang JTAG stuff.
|
||||
#
|
||||
# ep93xx.c
|
||||
# Just like at91rm9200 - different chip.
|
||||
|
||||
#========================================
|
||||
# Build OPENOCD config options...
|
||||
# Always enable "dummy"
|
||||
OPENOCD_CONFIG_OPTIONS += --enable-dummy
|
||||
#
|
||||
# Today: Cannot enable 'oocd_trace' on cygwin.
|
||||
# it assumes/uses termios functions like
|
||||
# cfmakeraw() which do not exist on cygwin.
|
||||
#
|
||||
#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace
|
||||
#
|
||||
# Add printer options..
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}}
|
||||
|
||||
# Add the FTD2232 based options.
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}}
|
||||
|
||||
# Add LIBUSB based options.
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}}
|
||||
|
||||
|
||||
#========================================
|
||||
# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
|
||||
# We fix that with the "-O" option to wget.
|
||||
FTD2XX_WIN32_VERSION=2.04.14
|
||||
FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
|
||||
|
||||
FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
|
||||
# Damn thing has a space in the F-ing filename!
|
||||
FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
|
||||
|
||||
|
||||
#========================================
|
||||
# LIBCONFUSE - used by LIBFTDI..
|
||||
LIBCONFUSE_VERSION=2.5
|
||||
LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
|
||||
LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
|
||||
LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build
|
||||
|
||||
|
||||
#========================================
|
||||
# LIBFTDI... (which uses libusb, and libconfuse)
|
||||
LIBFTDI_VERSION=0.14
|
||||
LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
|
||||
LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
|
||||
LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
|
||||
|
||||
#========================================
|
||||
# Finally - OpenOCD...
|
||||
#
|
||||
OPENOCD_BUILD_DIR =${HERE}/openocd-build
|
||||
OPENOCD_SRC_DIR =${HERE}/openocd
|
||||
|
||||
#========================================
|
||||
# END ..
|
||||
#========================================
|
||||
Loading…
Reference in New Issue