interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

- added support for Hitex STM32 Performance Stick 

- added str9 and stm32 scripts to docs

git-svn-id: svn://svn.berlios.de/openocd/trunk@213 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
ntfreak 2007-11-23 15:16:22 +00:00
parent 8c634335b4
commit d6fae6fe02
2 changed files with 165 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
doc/openocd.texi
View File

@ -356,6 +356,8 @@ Luminary Micro EVB_LM3S811 as a JTAG interface (not onboard processor), no TRST
SRST signals on external connector
@item comstick
Hitex STR9 comstick
@item stm32stick
Hitex STM32 Performance Stick
@end itemize
@item @b{ft2232_vid_pid} <@var{vid}> <@var{pid}>
@ -1181,6 +1183,46 @@ working_area 0 0x50000000 16384 nobackup
flash bank str9x 0x00000000 0x00080000 0 0 0
@end smallexample
@section STR912 comstick
@cindex STR912 comstick Script
The following script was used with a Hitex STR9 Comstick:
@smallexample
#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "STR9-comStick A"
ft2232_layout comstick
jtag_speed 1
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 8 0x1 0x1 0xfe
jtag_device 4 0x1 0xf 0xe
jtag_device 5 0x1 0x1 0x1e
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm966e <endianness> <reset mode> <chainpos> <variant>
target arm966e little reset_halt 1 arm966e
run_and_halt_time 0 30
working_area 0 0x50000000 16384 nobackup
#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank str9x 0x00000000 0x00080000 0 0 0
@end smallexample
@section STM32x Script
@cindex STM32x Script
The following script was used with an Amontec JTAGkey and a STM32x cpu:
@ -1195,6 +1237,9 @@ ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
jtag_speed 10
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
@ -1217,6 +1262,46 @@ working_area 0 0x20000000 16384 nobackup
flash bank stm32x 0x08000000 0x00010000 0 0 0
@end smallexample
@section STM32x Performance Stick
@cindex STM32x Performance Stick Script
The following script was used with the Hitex STM32 Performance Stick
@smallexample
#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "STM32-PerformanceStick A"
ft2232_layout stm32stick
jtag_speed 10
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
jtag_device 5 0x1 0x1 0x1e
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target cortex_m3 <endianness> <reset mode> <chainpos> <variant>
target cortex_m3 little run_and_halt 0
run_and_halt_time 0 30
working_area 0 0x20000000 16384 nobackup
#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank stm32x 0x08000000 0x00010000 0 0 0
@end smallexample
@section LPC2294 Script
@cindex LPC2294 Script
The following script was used with an Amontec JTAGkey and a LPC2294 cpu:

79
src/jtag/ft2232.c
View File

@ -100,6 +100,7 @@ int olimex_jtag_init(void);
int flyswatter_init(void);
int turtle_init(void);
int comstick_init(void);
int stm32stick_init(void);
/* reset procedures for supported layouts */
void usbjtag_reset(int trst, int srst);
@ -108,6 +109,7 @@ void olimex_jtag_reset(int trst, int srst);
void flyswatter_reset(int trst, int srst);
void turtle_reset(int trst, int srst);
void comstick_reset(int trst, int srst);
void stm32stick_reset(int trst, int srst);
/* blink procedures for layouts that support a blinking led */
void olimex_jtag_blink(void);
@ -125,6 +127,7 @@ ft2232_layout_t ft2232_layouts[] =
{"flyswatter", flyswatter_init, flyswatter_reset, NULL},
{"turtelizer2", turtle_init, turtle_reset, turtle_jtag_blink},
{"comstick", comstick_init, comstick_reset, NULL},
{"stm32stick", stm32stick_init, stm32stick_reset, NULL},
{NULL, NULL, NULL},
};
@ -1073,6 +1076,39 @@ void comstick_reset(int trst, int srst)
DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
void stm32stick_reset(int trst, int srst)
{
if (trst == 1)
{
cur_state = TAP_TLR;
high_output &= ~nTRST;
}
else if (trst == 0)
{
high_output |= nTRST;
}
if (srst == 1)
{
low_output &= ~nSRST;
}
else if (srst == 0)
{
low_output |= nSRST;
}
/* command "set data bits low byte" */
BUFFER_ADD = 0x80;
BUFFER_ADD = low_output;
BUFFER_ADD = low_direction;
/* command "set data bits high byte" */
BUFFER_ADD = 0x82;
BUFFER_ADD = high_output;
BUFFER_ADD = high_direction;
DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
int ft2232_execute_queue()
{
jtag_command_t *cmd = jtag_command_queue; /* currently processed command */
@ -1916,6 +1952,49 @@ int comstick_init(void)
return ERROR_OK;
}
int stm32stick_init(void)
{
u8 buf[3];
u32 bytes_written;
low_output = 0x88;
low_direction = 0x8b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
return ERROR_JTAG_INIT_FAILED;
}
nTRST = 0x01;
nTRSTnOE = 0x00; /* no output enable for nTRST */
nSRST = 0x80;
nSRSTnOE = 0x00; /* no output enable for nSRST */
high_output = 0x01;
high_direction = 0x03;
/* initialize high port */
buf[0] = 0x82; /* command "set data bits high byte" */
buf[1] = high_output;
buf[2] = high_direction;
DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
return ERROR_JTAG_INIT_FAILED;
}
return ERROR_OK;
}
void olimex_jtag_blink(void)
{
/* Olimex ARM-USB-OCD has a LED connected to ACBUS3