adi_v5_swd: Avoid special handling the SELECT cache during connect
The cache is forced to zero to match the value expected by the DPIDR read so the connect sequence is not destroyed by a SELECT update. However, DPIDR and in fact all registers except address 4 are independent of the current DPBANKSEL value. Change swd_queue_dp_bankselect() to use this fact and avoid touching SELECT for those registers. Change-Id: I0cd11925fb6adef481bbf45cc24ea2c6dab4b6fb Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3231 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This commit is contained in:
parent
feaea8632f
commit
cf49e04429
|
@ -112,9 +112,9 @@ static int swd_connect(struct adiv5_dap *dap)
|
|||
/* Note, debugport_init() does setup too */
|
||||
jtag_interface->swd->switch_seq(JTAG_TO_SWD);
|
||||
|
||||
/* Make sure we don't try to perform any other accesses before the DPIDR read. */
|
||||
/* Clear link state, including the SELECT cache. */
|
||||
dap->do_reconnect = false;
|
||||
dap->select = 0;
|
||||
dap->select = DP_SELECT_INVALID;
|
||||
|
||||
swd_queue_dp_read(dap, DP_IDCODE, &idcode);
|
||||
|
||||
|
@ -123,8 +123,6 @@ static int swd_connect(struct adiv5_dap *dap)
|
|||
|
||||
status = swd_run_inner(dap);
|
||||
|
||||
dap->select = DP_SELECT_INVALID;
|
||||
|
||||
if (status == ERROR_OK) {
|
||||
LOG_INFO("SWD IDCODE %#8.8" PRIx32, idcode);
|
||||
dap->do_reconnect = false;
|
||||
|
@ -160,7 +158,8 @@ static int swd_queue_ap_abort(struct adiv5_dap *dap, uint8_t *ack)
|
|||
/** Select the DP register bank matching bits 7:4 of reg. */
|
||||
static void swd_queue_dp_bankselect(struct adiv5_dap *dap, unsigned reg)
|
||||
{
|
||||
if (reg == DP_SELECT)
|
||||
/* Only register address 4 is banked. */
|
||||
if ((reg & 0xf) != 4)
|
||||
return;
|
||||
|
||||
uint32_t select_dp_bank = (reg & 0x000000F0) >> 4;
|
||||
|
|
Loading…
Reference in New Issue