contrib: add source to the cfi flash loaders

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
This commit is contained in:
Spencer Oliver 2010-12-10 19:37:39 +00:00
parent 9a76c68563
commit cbf48bed6a
8 changed files with 475 additions and 6 deletions

View File

@ -0,0 +1,57 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* algorithm register usage:
* r0: source address (in RAM)
* r1: target address (in Flash)
* r2: count
* r3: flash write command
* r4: status byte (returned to host)
* r5: busy test pattern
* r6: error test pattern
*/
loop:
ldrh r4, [r0], #2
strh r3, [r1]
strh r4, [r1]
busy:
ldrh r4, [r1]
and r7, r4, r5
cmp r7, r5
bne busy
tst r4, r6
bne done
subs r2, r2, #1
beq done
add r1, r1, #2
b loop
done:
b done
.end

View File

@ -0,0 +1,57 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* algorithm register usage:
* r0: source address (in RAM)
* r1: target address (in Flash)
* r2: count
* r3: flash write command
* r4: status byte (returned to host)
* r5: busy test pattern
* r6: error test pattern
*/
loop:
ldr r4, [r0], #4
str r3, [r1]
str r4, [r1]
busy:
ldr r4, [r1]
and r7, r4, r5
cmp r7, r5
bne busy
tst r4, r6
bne done
subs r2, r2, #1
beq done
add r1, r1, #4
b loop
done:
b done
.end

View File

@ -0,0 +1,57 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* algorithm register usage:
* r0: source address (in RAM)
* r1: target address (in Flash)
* r2: count
* r3: flash write command
* r4: status byte (returned to host)
* r5: busy test pattern
* r6: error test pattern
*/
loop:
ldrb r4, [r0], #1
strb r3, [r1]
strb r4, [r1]
busy:
ldrb r4, [r1]
and r7, r4, r5
cmp r7, r5
bne busy
tst r4, r6
bne done
subs r2, r2, #1
beq done
add r1, r1, #1
b loop
done:
b done
.end

View File

@ -0,0 +1,75 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* input parameters - */
/* R0 = source address */
/* R1 = destination address */
/* R2 = number of writes */
/* R3 = flash write command */
/* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
/* output parameters - */
/* R5 = 0x80 ok 0x00 bad */
/* temp registers - */
/* R6 = value read from flash to test status */
/* R7 = holding register */
/* unlock registers - */
/* R8 = unlock1_addr */
/* R9 = unlock1_cmd */
/* R10 = unlock2_addr */
/* R11 = unlock2_cmd */
code:
ldrh r5, [r0], #2
strh r9, [r8]
strh r11, [r10]
strh r3, [r8]
strh r5, [r1]
nop
busy:
ldrh r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
ands r6, r6, r4, lsr #2
beq busy /* b if DQ5 low */
ldrh r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
mov r5, #0 /* 0x0 - return 0x00, error */
bne done
cont:
subs r2, r2, #1 /* 0x1 */
moveq r5, #128 /* 0x80 */
beq done
add r1, r1, #2 /* 0x2 */
b code
done:
b done
.end

View File

@ -0,0 +1,66 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* input parameters - */
/* R0 = source address */
/* R1 = destination address */
/* R2 = number of writes */
/* R3 = flash write command */
/* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
/* output parameters - */
/* R5 = 0x80 ok 0x00 bad */
/* temp registers - */
/* R6 = value read from flash to test status */
/* R7 = holding register */
/* unlock registers - */
/* R8 = unlock1_addr */
/* R9 = unlock1_cmd */
/* R10 = unlock2_addr */
/* R11 = unlock2_cmd */
code:
ldrh r5, [r0], #2
strh r9, [r8]
strh r11, [r10]
strh r3, [r8]
strh r5, [r1]
nop
busy:
ldrh r6, [r1]
eor r7, r5, r6
ands r7, #0x80
bne busy
subs r2, r2, #1 /* 0x1 */
moveq r5, #128 /* 0x80 */
beq done
add r1, r1, #2 /* 0x2 */
b code
done:
b done
.end

View File

@ -0,0 +1,75 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* input parameters - */
/* R0 = source address */
/* R1 = destination address */
/* R2 = number of writes */
/* R3 = flash write command */
/* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
/* output parameters - */
/* R5 = 0x80 ok 0x00 bad */
/* temp registers - */
/* R6 = value read from flash to test status */
/* R7 = holding register */
/* unlock registers - */
/* R8 = unlock1_addr */
/* R9 = unlock1_cmd */
/* R10 = unlock2_addr */
/* R11 = unlock2_cmd */
code:
ldr r5, [r0], #4
str r9, [r8]
str r11, [r10]
str r3, [r8]
str r5, [r1]
nop
busy:
ldr r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
ands r6, r6, r4, lsr #2
beq busy /* b if DQ5 low */
ldr r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
mov r5, #0 /* 0x0 - return 0x00, error */
bne done
cont:
subs r2, r2, #1 /* 0x1 */
moveq r5, #128 /* 0x80 */
beq done
add r1, r1, #4 /* 0x4 */
b code
done:
b done
.end

View File

@ -0,0 +1,75 @@
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2010 Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
.text
.arm
.arch armv4
.section .init
/* input parameters - */
/* R0 = source address */
/* R1 = destination address */
/* R2 = number of writes */
/* R3 = flash write command */
/* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
/* output parameters - */
/* R5 = 0x80 ok 0x00 bad */
/* temp registers - */
/* R6 = value read from flash to test status */
/* R7 = holding register */
/* unlock registers - */
/* R8 = unlock1_addr */
/* R9 = unlock1_cmd */
/* R10 = unlock2_addr */
/* R11 = unlock2_cmd */
code:
ldrb r5, [r0], #1
strb r9, [r8]
strb r11, [r10]
strb r3, [r8]
strb r5, [r1]
nop
busy:
ldrb r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
ands r6, r6, r4, lsr #2
beq busy /* b if DQ5 low */
ldrb r6, [r1]
eor r7, r5, r6
ands r7, r4, r7
beq cont /* b if DQ7 == Data7 */
mov r5, #0 /* 0x0 - return 0x00, error */
bne done
cont:
subs r2, r2, #1 /* 0x1 */
moveq r5, #128 /* 0x80 */
beq done
add r1, r1, #1 /* 0x1 */
b code
done:
b done
.end

View File

@ -1226,6 +1226,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
* r6: error test pattern
*/
/* see contib/loaders/flash/armv4_5_cfi_intel_32.s for src */
static const uint32_t word_32_code[] = {
0xe4904004, /* loop: ldr r4, [r0], #4 */
0xe5813000, /* str r3, [r1] */
@ -1243,6 +1244,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
0xeafffffe /* done: b -2 */
};
/* see contib/loaders/flash/armv4_5_cfi_intel_16.s for src */
static const uint32_t word_16_code[] = {
0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
0xe1c130b0, /* strh r3, [r1] */
@ -1260,6 +1262,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
0xeafffffe /* done: b -2 */
};
/* see contib/loaders/flash/armv4_5_cfi_intel_8.s for src */
static const uint32_t word_8_code[] = {
0xe4d04001, /* loop: ldrb r4, [r0], #1 */
0xe5c13000, /* strb r3, [r1] */
@ -1487,6 +1490,7 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* R10 = unlock2_addr */
/* R11 = unlock2_cmd */
/* see contib/loaders/flash/armv4_5_cfi_span_32.s for src */
static const uint32_t word_32_code[] = {
/* 00008100 <sp_32_code>: */
0xe4905004, /* ldr r5, [r0], #4 */
@ -1519,9 +1523,10 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* */
/* 00008154 <sp_32_done>: */
0xeafffffe /* b 8154 <sp_32_done> */
};
};
static const uint32_t word_16_code[] = {
/* see contib/loaders/flash/armv4_5_cfi_span_16.s for src */
static const uint32_t word_16_code[] = {
/* 00008158 <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xe1c890b0, /* strh r9, [r8] */
@ -1553,9 +1558,10 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* */
/* 000081ac <sp_16_done>: */
0xeafffffe /* b 81ac <sp_16_done> */
};
};
static const uint32_t word_16_code_dq7only[] = {
/* see contib/loaders/flash/armv4_5_cfi_span_16_dq7.s for src */
static const uint32_t word_16_code_dq7only[] = {
/* <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xe1c890b0, /* strh r9, [r8] */
@ -1578,9 +1584,10 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* */
/* 000081ac <sp_16_done>: */
0xeafffffe /* b 81ac <sp_16_done> */
};
};
static const uint32_t word_8_code[] = {
/* see contib/loaders/flash/armv4_5_cfi_span_8.s for src */
static const uint32_t word_8_code[] = {
/* 000081b0 <sp_16_code_end>: */
0xe4d05001, /* ldrb r5, [r0], #1 */
0xe5c89000, /* strb r9, [r8] */