From cb97a4e82171dcf81fce8d012554b99344787836 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Thu, 18 Nov 2021 11:15:42 +0100 Subject: [PATCH] doc: remove non-existing command riscv set_scratch_ram The command was proposed in http://review.openocd.org/#/c/4578/2 and dropped in favor on existing work area commands. Nevertheless the command landed in documentation. Remove it! Change-Id: I6e18124256f29be15d8593c07d96f61d19e983f8 Signed-off-by: Antonio Borneo Fixes: a51ab8ddf63a ("Add RISC-V support.") Reviewed-on: https://review.openocd.org/c/openocd/+/6721 Tested-by: jenkins Reviewed-by: Jan Matyas --- doc/openocd.texi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 85dc432da..40a3f2791 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -10199,11 +10199,6 @@ Set the maximum time to wait for a hart to come out of reset after reset is deasserted. @end deffn -@deffn {Command} {riscv set_scratch_ram} none|[address] -Set the address of 16 bytes of scratch RAM the debugger can use, or 'none'. -This is used to access 64-bit floating point registers on 32-bit targets. -@end deffn - @deffn {Command} {riscv set_prefer_sba} on|off When on, prefer to use System Bus Access to access memory. When off (default), prefer to use the Program Buffer to access memory.