diff --git a/tcl/board/digilent_nexys2.cfg b/tcl/board/digilent_nexys2.cfg
new file mode 100644
index 000000000..c1c5b2ac6
--- /dev/null
+++ b/tcl/board/digilent_nexys2.cfg
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# https://digilent.com/reference/programmable-logic/nexys-2/start
+#
+# The Digilent Nexy2 normally requires proprietary tools to program and will
+# enumerate as:
+#   ID 1443:0005 1443 ONBOARD USB
+#
+# However, the ixo-usb-jtag project provides an alternative open firmware for
+# the on board programmer. When using this firmware the board will then
+# enumerate as:
+#   ID 16c0:06ad ixo.de USB-JTAG-IF (With SerialNumber == hw_nexys)
+#
+# See the interface/usb-jtag.cfg for more information.
+
+source [find interface/usb-jtag.cfg]
+source [find cpld/xilinx-xcf-s.cfg]
+source [find fpga/xilinx-xc3s.cfg]
+
+# Usage:
+#
+# Load Bitstream into FPGA:
+#    openocd -f board/digilent_nexys2.cfg -c "init;\
+#    pld load 0 bitstream.bit;\
+#    shutdown"
+
+# Read Unique Device Identifier (DNA):
+#    openocd -f board/digilent_nexys2.cfg -c "init;\
+#    xilinx_print_dna [xc3s_get_dna xc3s.tap];\
+#    shutdown"