From 96f9790279f74f39b35fc3ad09340fd03123180c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 15 Mar 2010 08:37:43 -0700 Subject: [PATCH] rename jtag_khz as adapter_khz Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell --- NEWS | 5 +++++ doc/openocd.texi | 18 ++++++++--------- src/jtag/core.c | 10 +++++----- src/jtag/drivers/presto.c | 4 ++-- src/jtag/startup.tcl | 9 +++++++++ src/jtag/tcl.c | 21 ++++++++++---------- src/svf/svf.c | 2 +- tcl/board/at91eb40a.cfg | 2 +- tcl/board/at91rm9200-dk.cfg | 4 ++-- tcl/board/at91sam9g20-ek.cfg | 4 ++-- tcl/board/csb337.cfg | 4 ++-- tcl/board/dm365evm.cfg | 2 +- tcl/board/ek-lm3s1968.cfg | 4 ++-- tcl/board/ek-lm3s811.cfg | 2 +- tcl/board/ek-lm3s9b9x.cfg | 2 +- tcl/board/ethernut3.cfg | 2 +- tcl/board/hitex_lpc2929.cfg | 6 +++--- tcl/board/hitex_str9-comstick.cfg | 2 +- tcl/board/imx27lnst.cfg | 2 +- tcl/board/mini2440.cfg | 2 +- tcl/board/phytec_lpc3250.cfg | 6 +++--- tcl/board/telo.cfg | 4 ++-- tcl/board/topas910.cfg | 2 +- tcl/board/topasa900.cfg | 2 +- tcl/board/zy1000.cfg | 2 +- tcl/interface/altera-usb-blaster.cfg | 2 +- tcl/interface/oocdlink.cfg | 2 +- tcl/interface/openrd.cfg | 2 +- tcl/interface/sheevaplug.cfg | 2 +- tcl/interface/usb-jtag.cfg | 2 +- tcl/interface/vsllink.cfg | 4 ++-- tcl/target/at91sam9260_ext_RAM_ext_flash.cfg | 6 +++--- tcl/target/c100.cfg | 2 +- tcl/target/c100helper.tcl | 2 +- tcl/target/dsp56321.cfg | 2 +- tcl/target/lm3s6965.cfg | 2 +- tcl/target/lpc2124.cfg | 2 +- tcl/target/lpc2378.cfg | 2 +- tcl/target/mc13224v.cfg | 2 +- tcl/target/mega128.cfg | 4 ++-- tcl/target/pxa255.cfg | 4 ++-- tcl/target/readme.txt | 6 +++--- tcl/target/samsung_s3c2450.cfg | 4 ++-- tcl/target/stellaris.cfg | 4 ++-- tcl/target/stm32.cfg | 2 +- tcl/target/str710.cfg | 6 +++--- tcl/target/str730.cfg | 6 +++--- tcl/target/str750.cfg | 6 +++--- tcl/target/telo.cfg | 8 ++++---- 49 files changed, 111 insertions(+), 96 deletions(-) diff --git a/NEWS b/NEWS index 77435e12c..4e093dcb0 100644 --- a/NEWS +++ b/NEWS @@ -5,6 +5,11 @@ and other issues not mentioned here. JTAG Layer: New driver for "Bus Pirate" + Rename various commands so they're not JTAG-specific + There are migration procedures for these, but you should + convert your scripts to the new names, since those procedures + will not be around forever. + jtag_khz ... is now adapter_khz Boundary Scan: diff --git a/doc/openocd.texi b/doc/openocd.texi index 93757d48f..5a1e09566 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -1516,7 +1516,7 @@ solution just avoids using that instruction with JTAG debuggers. If both the chip and the board support adaptive clocking, use the @command{jtag_rclk} command, in case your board is used with JTAG adapter which -also supports it. Otherwise use @command{jtag_khz}. +also supports it. Otherwise use @command{adapter_khz}. Set the slow rate at the beginning of the reset sequence, and the faster rate as soon as the clocks are at full speed. @@ -2342,7 +2342,7 @@ you may encounter a problem. @deffn Command {parport_toggling_time} [nanoseconds] Displays how many nanoseconds the hardware needs to toggle TCK; the parport driver uses this value to obey the -@command{jtag_khz} configuration. +@command{adapter_khz} configuration. When the optional @var{nanoseconds} parameter is given, that setting is changed before displaying the current value. @@ -2353,7 +2353,7 @@ To measure the toggling time with a logic analyzer or a digital storage oscilloscope, follow the procedure below: @example > parport_toggling_time 1000 -> jtag_khz 500 +> adapter_khz 500 @end example This sets the maximum JTAG clock speed of the hardware, but the actual speed probably deviates from the requested 500 kHz. @@ -2364,14 +2364,14 @@ Update the setting to match your measurement: @example > parport_toggling_time @end example -Now the clock speed will be a better match for @command{jtag_khz rate} +Now the clock speed will be a better match for @command{adapter_khz rate} commands given in OpenOCD scripts and event handlers. You can do something similar with many digital multimeters, but note that you'll probably need to run the clock continuously for several seconds before it decides what clock rate to show. Adjust the toggling time up or down until the measured clock rate is a good -match for the jtag_khz rate you specified; be conservative. +match for the adapter_khz rate you specified; be conservative. @end quotation @end deffn @@ -2470,10 +2470,10 @@ However, it introduces delays to synchronize clocks; so it may not be the fastest solution. @b{NOTE:} Script writers should consider using @command{jtag_rclk} -instead of @command{jtag_khz}, but only for (ARM) cores and boards +instead of @command{adapter_khz}, but only for (ARM) cores and boards which support adaptive clocking. -@deffn {Command} jtag_khz max_speed_kHz +@deffn {Command} adapter_khz max_speed_kHz A non-zero speed is in KHZ. Hence: 3000 is 3mhz. JTAG interfaces usually support a limited number of speeds. The speed actually used won't be faster @@ -3881,7 +3881,7 @@ the target clocks are fully set up.) before @command{reset_init} is called. This is the most robust place to use @command{jtag_rclk} -or @command{jtag_khz} to switch to a low JTAG clock rate, +or @command{adapter_khz} to switch to a low JTAG clock rate, when reset disables PLLs needed to use a fast clock. @ignore @item @b{reset-wait-pos} @@ -7290,7 +7290,7 @@ To set the JTAG frequency use the command: @example # Example: 1.234MHz -jtag_khz 1234 +adapter_khz 1234 @end example diff --git a/src/jtag/core.c b/src/jtag/core.c index e7cb48d76..bdf968e95 100644 --- a/src/jtag/core.c +++ b/src/jtag/core.c @@ -1556,7 +1556,7 @@ unsigned jtag_get_speed_khz(void) return speed_khz; } -static int jtag_khz_to_speed(unsigned khz, int* speed) +static int adapter_khz_to_speed(unsigned khz, int* speed) { LOG_DEBUG("convert khz to interface specific speed value"); speed_khz = khz; @@ -1576,11 +1576,11 @@ static int jtag_khz_to_speed(unsigned khz, int* speed) static int jtag_rclk_to_speed(unsigned fallback_speed_khz, int* speed) { - int retval = jtag_khz_to_speed(0, speed); + int retval = adapter_khz_to_speed(0, speed); if ((ERROR_OK != retval) && fallback_speed_khz) { LOG_DEBUG("trying fallback speed..."); - retval = jtag_khz_to_speed(fallback_speed_khz, speed); + retval = adapter_khz_to_speed(fallback_speed_khz, speed); } return retval; } @@ -1598,7 +1598,7 @@ int jtag_config_khz(unsigned khz) LOG_DEBUG("handle jtag khz"); clock_mode = CLOCK_MODE_KHZ; int speed = 0; - int retval = jtag_khz_to_speed(khz, &speed); + int retval = adapter_khz_to_speed(khz, &speed); return (ERROR_OK != retval) ? retval : jtag_set_speed(speed); } @@ -1621,7 +1621,7 @@ int jtag_get_speed(void) speed = jtag_speed; break; case CLOCK_MODE_KHZ: - jtag_khz_to_speed(jtag_get_speed_khz(), &speed); + adapter_khz_to_speed(jtag_get_speed_khz(), &speed); break; case CLOCK_MODE_RCLK: jtag_rclk_to_speed(rclk_fallback_speed_khz, &speed); diff --git a/src/jtag/drivers/presto.c b/src/jtag/drivers/presto.c index 72126a1ef..10bed2720 100644 --- a/src/jtag/drivers/presto.c +++ b/src/jtag/drivers/presto.c @@ -680,7 +680,7 @@ static struct bitq_interface presto_bitq = { /* -------------------------------------------------------------------------- */ -static int presto_jtag_khz(int khz, int *jtag_speed) +static int presto_adapter_khz(int khz, int *jtag_speed) { if (khz < 0) { @@ -797,7 +797,7 @@ struct jtag_interface presto_interface = { .execute_queue = bitq_execute_queue, .speed = presto_jtag_speed, - .khz = presto_jtag_khz, + .khz = presto_adapter_khz, .speed_div = presto_jtag_speed_div, .init = presto_jtag_init, .quit = presto_jtag_quit, diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl index 4e6d5fc18..c49c43e1b 100644 --- a/src/jtag/startup.tcl +++ b/src/jtag/startup.tcl @@ -75,3 +75,12 @@ add_help_text srst_deasserted "Overridable procedure run when srst deassert is d proc srst_asserted {} { puts "Sensed nSRST asserted." } + +# BEGIN MIGRATION AIDS ... these adapter operations originally had +# JTAG-specific names despite the fact that the operations were not +# specific to JTAG. +# +# FIXME phase these aids out after about April 2011 +# +proc jtag_khz args { eval adapter_khz $args } +# END MIGRATION AIDS diff --git a/src/jtag/tcl.c b/src/jtag/tcl.c index ce17e4b85..8faefd1a9 100644 --- a/src/jtag/tcl.c +++ b/src/jtag/tcl.c @@ -1351,7 +1351,7 @@ COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command) return ERROR_OK; } -COMMAND_HANDLER(handle_jtag_khz_command) +COMMAND_HANDLER(handle_adapter_khz_command) { if (CMD_ARGC > 1) return ERROR_COMMAND_SYNTAX_ERROR; @@ -1608,6 +1608,16 @@ COMMAND_HANDLER(handle_tms_sequence_command) } static const struct command_registration interface_command_handlers[] = { + { + .name = "adapter_khz", + .handler = handle_adapter_khz_command, + .mode = COMMAND_ANY, + .help = "With an argument, change to the specified maximum " + "jtag speed. For JTAG, 0 KHz signifies adaptive " + " clocking. " + "With or without argument, display current setting.", + .usage = "[khz]", + }, { .name = "interface", .handler = handle_interface_command, @@ -1636,15 +1646,6 @@ int interface_register_commands(struct command_context *ctx) } static const struct command_registration jtag_command_handlers[] = { - { - .name = "jtag_khz", - .handler = handle_jtag_khz_command, - .mode = COMMAND_ANY, - .help = "With an argument, change to the specified maximum " - "jtag speed. Pass 0 to require adaptive clocking. " - "With or without argument, display current setting.", - .usage = "[khz]", - }, { .name = "jtag_rclk", .handler = handle_jtag_rclk_command, diff --git a/src/svf/svf.c b/src/svf/svf.c index fba499c3d..6e951e24f 100644 --- a/src/svf/svf.c +++ b/src/svf/svf.c @@ -880,7 +880,7 @@ static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str) // TODO: set jtag speed to if (svf_para.frequency > 0) { - command_run_linef(cmd_ctx, "jtag_khz %d", (int)svf_para.frequency / 1000); + command_run_linef(cmd_ctx, "adapter_khz %d", (int)svf_para.frequency / 1000); LOG_DEBUG("\tfrequency = %f", svf_para.frequency); } } diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg index 40f2e123f..14f21a1ac 100644 --- a/tcl/board/at91eb40a.cfg +++ b/tcl/board/at91eb40a.cfg @@ -65,4 +65,4 @@ $_TARGETNAME configure -event reset-init { } # This target is pretty snappy... -jtag_khz 16000 +adapter_khz 16000 diff --git a/tcl/board/at91rm9200-dk.cfg b/tcl/board/at91rm9200-dk.cfg index 9a6f89e6f..476f5a80d 100644 --- a/tcl/board/at91rm9200-dk.cfg +++ b/tcl/board/at91rm9200-dk.cfg @@ -15,7 +15,7 @@ flash_bank cfi 0x10000000 0x00200000 2 2 0 proc at91rm9200_dk_init { } { # Try to run at 1khz... Yea, that slow! # Chip is really running @ 32khz - jtag_khz 8 + adapter_khz 8 mww 0xfffffc64 0xffffffff ## disable all clocks but system clock @@ -41,7 +41,7 @@ proc at91rm9200_dk_init { } { #======================================== # CPU now runs at 180mhz # SYS runs at 60mhz. - jtag_khz 40000 + adapter_khz 40000 #======================================== diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index fb6068cc6..f24f1a13d 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -77,7 +77,7 @@ proc at91sam9g20_init { } { # means the master clock (MCLK) must be at or below 133 MHz or timing errors will occur. The processor # core can operate up to 400 MHz and therefore PCLK must be at or below this to function properly. - jtag_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow. + adapter_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow. halt # Make sure processor is halted, or error will result in following steps. mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset. mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog. @@ -112,7 +112,7 @@ proc at91sam9g20_init { } { # Switch over to adaptive clocking. - jtag_khz 0 + adapter_khz 0 # Enable faster DCC downloads. diff --git a/tcl/board/csb337.cfg b/tcl/board/csb337.cfg index b7bce489f..5e225f5f5 100644 --- a/tcl/board/csb337.cfg +++ b/tcl/board/csb337.cfg @@ -19,7 +19,7 @@ if { [info exists ETM_DRIVER] } { proc csb337_clk_init { } { # CPU is in Slow Clock Mode (32KiHz) ... needs slow JTAG clock - jtag_khz 8 + adapter_khz 8 # CKGR_MOR: start main oscillator (3.6864 MHz) mww 0xfffffc20 0xff01 @@ -37,7 +37,7 @@ proc csb337_clk_init { } { sleep 20 # CPU is in Normal Mode ... allows faster JTAG clock speed - jtag_khz 40000 + adapter_khz 40000 } proc csb337_nor_init { } { diff --git a/tcl/board/dm365evm.cfg b/tcl/board/dm365evm.cfg index f8ec4e04b..8f268c455 100644 --- a/tcl/board/dm365evm.cfg +++ b/tcl/board/dm365evm.cfg @@ -103,7 +103,7 @@ proc dm365evm_init {} { echo "Initialize DM365 EVM board" # CLKIN = 24 MHz ... can't talk quickly to ARM yet - jtag_khz 1500 + adapter_khz 1500 # FIXME -- PLL init diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg index bf4b09724..6ce7f7fad 100644 --- a/tcl/board/ek-lm3s1968.cfg +++ b/tcl/board/ek-lm3s1968.cfg @@ -4,7 +4,7 @@ # http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html # NOTE: to use J-Link instead of the on-board interface, -# you may also need to reduce jtag_khz to be about 1200. +# you may also need to reduce adapter_khz to be about 1200. # source [find interface/jlink.cfg] # include the FT2232 interface config for on-board JTAG interface @@ -14,7 +14,7 @@ source [find interface/luminary.cfg] source [find target/lm3s1968.cfg] # jtag speed -jtag_khz 3000 +adapter_khz 3000 jtag_nsrst_delay 100 diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg index 5825c23dc..078cae1fb 100644 --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -10,7 +10,7 @@ source [find interface/luminary.cfg] source [find target/lm3s811.cfg] # jtag speed -jtag_khz 500 +adapter_khz 500 jtag_nsrst_delay 100 diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg index 407ecc80b..b8be88b84 100644 --- a/tcl/board/ek-lm3s9b9x.cfg +++ b/tcl/board/ek-lm3s9b9x.cfg @@ -9,7 +9,7 @@ source [find interface/luminary-icdi.cfg] source [find target/lm3s9b9x.cfg] # jtag speed -jtag_khz 500 +adapter_khz 500 jtag_nsrst_delay 100 diff --git a/tcl/board/ethernut3.cfg b/tcl/board/ethernut3.cfg index f22e68873..359cb0bfc 100644 --- a/tcl/board/ethernut3.cfg +++ b/tcl/board/ethernut3.cfg @@ -26,7 +26,7 @@ jtag_ntrst_delay 300 arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable -jtag_khz 16000 +adapter_khz 16000 # Target events diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg index 7d06f7452..35cc7d0b9 100644 --- a/tcl/board/hitex_lpc2929.cfg +++ b/tcl/board/hitex_lpc2929.cfg @@ -7,7 +7,7 @@ jtag_ntrst_delay 1 # Maximum of 1/8 of clock frequency (XTAL = 16 MHz). # Adaptive clocking through RTCK is not supported. -jtag_khz 2000 +adapter_khz 2000 # Target device: LPC29xx with ETB # The following variables are used by the LPC2900 script: @@ -24,7 +24,7 @@ $_TARGETNAME configure -work-area-phys 0x58000000 -work-area-size 0x10000 -work- # Event handlers $_TARGETNAME configure -event reset-start { # Back to the slow JTAG clock - jtag_khz 2000 + adapter_khz 2000 } # External 16-bit flash at chip select CS7 (SST39VF3201-70, 4 MiB) @@ -46,7 +46,7 @@ $_TARGETNAME configure -event reset-init { mww 0xFFFF8070 0x02000000 # SYS_CLK_CONF: PLL # Increase JTAG speed - jtag_khz 6000 + adapter_khz 6000 # Enable external memory bus (16-bit SRAM at CS6, 16-bit flash at CS7) mww 0xE0001138 0x0000001F # P1.14 = D0 diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg index af7527a16..ade24f628 100644 --- a/tcl/board/hitex_str9-comstick.cfg +++ b/tcl/board/hitex_str9-comstick.cfg @@ -5,7 +5,7 @@ source [find interface/hitex_str9-comstick.cfg] # set jtag speed -jtag_khz 3000 +adapter_khz 3000 jtag_nsrst_delay 100 jtag_ntrst_delay 100 diff --git a/tcl/board/imx27lnst.cfg b/tcl/board/imx27lnst.cfg index ae141d418..e0ed05794 100644 --- a/tcl/board/imx27lnst.cfg +++ b/tcl/board/imx27lnst.cfg @@ -8,7 +8,7 @@ proc imx27lnst_init { } { # This setup puts RAM at 0xA0000000 # reset the board correctly - jtag_khz 500 + adapter_khz 500 reset run reset halt diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg index 47bebc43d..b053c2252 100644 --- a/tcl/board/mini2440.cfg +++ b/tcl/board/mini2440.cfg @@ -121,7 +121,7 @@ reset_config trst_and_srst # IMPORTANT! See README at top of this file. #------------------------------------------------------------------------- - jtag_khz 12000 + adapter_khz 12000 jtag interface #------------------------------------------------------------------------- diff --git a/tcl/board/phytec_lpc3250.cfg b/tcl/board/phytec_lpc3250.cfg index 78cb90de2..51622ef18 100644 --- a/tcl/board/phytec_lpc3250.cfg +++ b/tcl/board/phytec_lpc3250.cfg @@ -2,7 +2,7 @@ source [find target/lpc3250.cfg] jtag_nsrst_delay 200 jtag_ntrst_delay 1 -jtag_khz 200 +adapter_khz 200 reset_config trst_and_srst separate arm7_9 dcc_downloads enable @@ -11,11 +11,11 @@ $_TARGETNAME configure -event gdb-attach { reset init } $_TARGETNAME configure -event reset-start { arm7_9 fast_memory_access disable - jtag_khz 200 + adapter_khz 200 } $_TARGETNAME configure -event reset-end { - jtag_khz 6000 + adapter_khz 6000 arm7_9 fast_memory_access enable } diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index 0cbdb816d..cb4bc2a32 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -26,11 +26,11 @@ reset_config trst_and_srst separate # issue telnet: reset init # issue gdb: monitor reset init $_TARGETNAME configure -event reset-init { - jtag_khz 100 + adapter_khz 100 # this will setup Telo board setupTelo #turn up the JTAG speed - jtag_khz 3000 + adapter_khz 3000 puts "JTAG speek now 3MHz" puts "type helpC100 to get help on C100" } diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg index ae72c4b7a..303fc7782 100644 --- a/tcl/board/topas910.cfg +++ b/tcl/board/topas910.cfg @@ -99,7 +99,7 @@ proc topas910_init { } { mww 0xf4300004 0x00000000 sleep 10 -# jtag_khz NNNN +# adapter_khz NNNN # remap off in case of IROM boot mww 0xf0000004 0x00000001 diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg index 5984f81ff..aa3f77f2f 100644 --- a/tcl/board/topasa900.cfg +++ b/tcl/board/topasa900.cfg @@ -105,7 +105,7 @@ proc topasa900_init { } { mww 0xf4300004 0x00000000 sleep 10 -# jtag_khz NNNN +# adapter_khz NNNN # remap off in case of IROM boot mww 0xf0000004 0x00000001 diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg index 8278fa469..17594c2f1 100644 --- a/tcl/board/zy1000.cfg +++ b/tcl/board/zy1000.cfg @@ -66,7 +66,7 @@ $_TARGETNAME configure -event reset-init { # other things than flash programming. $_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0 -jtag_khz 16000 +adapter_khz 16000 proc production_info {} { diff --git a/tcl/interface/altera-usb-blaster.cfg b/tcl/interface/altera-usb-blaster.cfg index ae2146526..9f542d0a4 100644 --- a/tcl/interface/altera-usb-blaster.cfg +++ b/tcl/interface/altera-usb-blaster.cfg @@ -8,4 +8,4 @@ interface usb_blaster # These are already the defaults. # usb_blaster_vid_pid 0x09FB 0x6001 # usb_blaster_device_desc "USB-Blaster" -jtag_khz 3000 +adapter_khz 3000 diff --git a/tcl/interface/oocdlink.cfg b/tcl/interface/oocdlink.cfg index 9022afd2f..4e962f522 100644 --- a/tcl/interface/oocdlink.cfg +++ b/tcl/interface/oocdlink.cfg @@ -8,5 +8,5 @@ interface ft2232 ft2232_device_desc "OOCDLink" ft2232_layout oocdlink ft2232_vid_pid 0x0403 0xbaf8 -jtag_khz 5 +adapter_khz 5 diff --git a/tcl/interface/openrd.cfg b/tcl/interface/openrd.cfg index b01205bed..322b508b9 100644 --- a/tcl/interface/openrd.cfg +++ b/tcl/interface/openrd.cfg @@ -8,5 +8,5 @@ interface ft2232 ft2232_layout sheevaplug ft2232_vid_pid 0x0403 0x9e90 ft2232_device_desc "OpenRD JTAGKey FT2232D B" -jtag_khz 3000 +adapter_khz 3000 diff --git a/tcl/interface/sheevaplug.cfg b/tcl/interface/sheevaplug.cfg index 556f44d57..d46d71e28 100644 --- a/tcl/interface/sheevaplug.cfg +++ b/tcl/interface/sheevaplug.cfg @@ -8,5 +8,5 @@ interface ft2232 ft2232_layout sheevaplug ft2232_vid_pid 0x9e88 0x9e8f ft2232_device_desc "SheevaPlug JTAGKey FT2232D B" -jtag_khz 2000 +adapter_khz 2000 diff --git a/tcl/interface/usb-jtag.cfg b/tcl/interface/usb-jtag.cfg index b81028d61..a3db11e36 100644 --- a/tcl/interface/usb-jtag.cfg +++ b/tcl/interface/usb-jtag.cfg @@ -7,5 +7,5 @@ interface usb_blaster usb_blaster_vid_pid 0x16C0 0x06AD usb_blaster_device_desc "USB-JTAG-IF" -jtag_khz 3000 +adapter_khz 3000 diff --git a/tcl/interface/vsllink.cfg b/tcl/interface/vsllink.cfg index 7c9de7fe8..07a5a0680 100644 --- a/tcl/interface/vsllink.cfg +++ b/tcl/interface/vsllink.cfg @@ -19,7 +19,7 @@ vsllink_usb_bulkout 0x03 vsllink_usb_interface 1 # vsllink mode, dma or normal -# for low jtag_khz, use normal -# for high jtag_khz, use dma +# for low adapter_khz, use normal +# for high adapter_khz, use dma #vsllink_mode dma vsllink_mode normal diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index 690406bb3..03595404b 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -1,7 +1,7 @@ -jtag_khz 4 +adapter_khz 4 ###################################### @@ -62,7 +62,7 @@ flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME proc at91sam_init { } { # at reset chip runs at 32khz - jtag_khz 8 + adapter_khz 8 halt mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog @@ -79,7 +79,7 @@ proc at91sam_init { } { sleep 10 # wait 10 ms # Now run at anything fast... ie: 10mhz! - jtag_khz 10000 # Increase JTAG Speed to 6 MHz + adapter_khz 10000 # Increase JTAG Speed to 6 MHz arm7_9 dcc_downloads enable # Enable faster DCC downloads mww 0xffffec00 0x0a0a0a0a # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit diff --git a/tcl/target/c100.cfg b/tcl/target/c100.cfg index b175f23f4..23eca0c79 100644 --- a/tcl/target/c100.cfg +++ b/tcl/target/c100.cfg @@ -3,7 +3,7 @@ # this script only configures one core (that is used to run Linux) # assume no PLL lock, start slowly -jtag_khz 100 +adapter_khz 100 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME diff --git a/tcl/target/c100helper.tcl b/tcl/target/c100helper.tcl index 965887131..1fd58b657 100644 --- a/tcl/target/c100helper.tcl +++ b/tcl/target/c100helper.tcl @@ -504,7 +504,7 @@ proc reboot {} { mww $TIMER_WDT_HIGH_BOUND 0xffffff mww $TIMER_WDT_CURRENT_COUNT 0x0 puts "JTAG speed lowered to 100kHz" - jtag_khz 100 + adapter_khz 100 mww $TIMER_WDT_CONTROL 0x1 # wait until the reset puts -nonewline "Wating for watchdog to trigger..." diff --git a/tcl/target/dsp56321.cfg b/tcl/target/dsp56321.cfg index 450683705..281c4ddd4 100644 --- a/tcl/target/dsp56321.cfg +++ b/tcl/target/dsp56321.cfg @@ -22,7 +22,7 @@ if { [info exists CPUTAPID ] } { } #jtag speed -jtag_khz 4500 +adapter_khz 4500 #has only srst reset_config srst_only diff --git a/tcl/target/lm3s6965.cfg b/tcl/target/lm3s6965.cfg index 02d85d467..c6e623eea 100644 --- a/tcl/target/lm3s6965.cfg +++ b/tcl/target/lm3s6965.cfg @@ -13,7 +13,7 @@ if { [info exists CPUTAPID ] } { } # jtag speed -jtag_khz 500 +adapter_khz 500 jtag_nsrst_delay 100 jtag_ntrst_delay 100 diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 9a27aece5..ce55952ac 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -27,7 +27,7 @@ reset_config trst_and_srst srst_pulls_trst jtag_nsrst_delay 100 jtag_ntrst_delay 100 -jtag_khz 1000 +adapter_khz 1000 #jtag scan chain jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index 4e50ac5c8..7eb0dabbc 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -47,4 +47,4 @@ set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 -jtag_khz 500 +adapter_khz 500 diff --git a/tcl/target/mc13224v.cfg b/tcl/target/mc13224v.cfg index 497e376e6..33351caf0 100644 --- a/tcl/target/mc13224v.cfg +++ b/tcl/target/mc13224v.cfg @@ -36,7 +36,7 @@ jtag_ntrst_delay 200 # rclk hasn't been working well. This maybe the mc13224v or something else. #jtag_rclk 2000 -jtag_khz 2000 +adapter_khz 2000 ###################### # Target configuration diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg index 2cf31d619..697ec45bc 100644 --- a/tcl/target/mega128.cfg +++ b/tcl/target/mega128.cfg @@ -4,7 +4,7 @@ set _ENDIAN little # jtag speed -jtag_khz 4500 +adapter_khz 4500 reset_config srst_only jtag_nsrst_delay 100 @@ -27,7 +27,7 @@ flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME #to use it, script will be like: #init -#jtag_khz 4500 +#adapter_khz 4500 #reset init #verify_ircapture disable # diff --git a/tcl/target/pxa255.cfg b/tcl/target/pxa255.cfg index 44efdaa4b..5b745f859 100644 --- a/tcl/target/pxa255.cfg +++ b/tcl/target/pxa255.cfg @@ -28,8 +28,8 @@ target create $_TARGETNAME xscale -endian $_ENDIAN \ # PXA255 comes out of reset using 3.6864 MHz oscillator. # Until the PLL kicks in, keep the JTAG clock slow enough # that we get no errors. -jtag_khz 300 -$_TARGETNAME configure -event "reset-start" { jtag_khz 300 } +adapter_khz 300 +$_TARGETNAME configure -event "reset-start" { adapter_khz 300 } # both TRST and SRST are *required* for debug # DCSR is often accessed with SRST active diff --git a/tcl/target/readme.txt b/tcl/target/readme.txt index 39f8d1240..f028b11c7 100644 --- a/tcl/target/readme.txt +++ b/tcl/target/readme.txt @@ -26,12 +26,12 @@ assumed that all write-protect mechanisms should be disabled. flash write_image [file] verify_image [file] -4. jtag_khz sets the maximum speed (or alternatively RCLK). If invoked +4. adapter_khz sets the maximum speed (or alternatively RCLK). If invoked multiple times only the last setting is used. interface/xxx.cfg files are always executed *before* target/xxx.cfg -files, so any jtag_khz in interface/xxx.cfg will be overridden by -target/xxx.cfg. jtag_khz in interface/xxx.cfg would then, effectively, +files, so any adapter_khz in interface/xxx.cfg will be overridden by +target/xxx.cfg. adapter_khz in interface/xxx.cfg would then, effectively, set the default JTAG speed. Note that a target/xxx.cfg file can invoke another target/yyy.cfg file, diff --git a/tcl/target/samsung_s3c2450.cfg b/tcl/target/samsung_s3c2450.cfg index 071b271a0..007542600 100644 --- a/tcl/target/samsung_s3c2450.cfg +++ b/tcl/target/samsung_s3c2450.cfg @@ -7,11 +7,11 @@ # # RCLK? # -# jtag_khz 0 +# adapter_khz 0 # # Really low clock during reset? # -# jtag_khz 1 +# adapter_khz 1 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg index 6fafac942..5f4428f5d 100644 --- a/tcl/target/stellaris.cfg +++ b/tcl/target/stellaris.cfg @@ -41,8 +41,8 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 # NOTE: this may be increased by a reset-init handler, after it # configures and enables the PLL. Or you might need to decrease # this, if you're using a slower clock. -jtag_khz 500 -$_TARGETNAME configure -event reset-start {jtag_khz 500} +adapter_khz 500 +$_TARGETNAME configure -event reset-start {adapter_khz 500} # flash configuration ... autodetects sizes, autoprobed flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index 463a85cfd..29c9f7ff1 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -21,7 +21,7 @@ if { [info exists WORKAREASIZE] } { } # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -jtag_khz 1000 +adapter_khz 1000 jtag_nsrst_delay 100 jtag_ntrst_delay 100 diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg index 028c6043d..4d685865c 100644 --- a/tcl/target/str710.cfg +++ b/tcl/target/str710.cfg @@ -1,5 +1,5 @@ #start slow, speed up after reset -jtag_khz 10 +adapter_khz 10 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -29,9 +29,9 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_C set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi -$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-init { - jtag_khz 6000 + adapter_khz 6000 # Because the hardware cannot be interrogated for the protection state # of sectors, initialize all the sectors to be unprotected. The initial diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index 091795315..3a84897c1 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -1,6 +1,6 @@ #STR730 CPU -jtag_khz 3000 +adapter_khz 3000 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -33,9 +33,9 @@ jtag_ntrst_delay 500 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi -$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-init { - jtag_khz 3000 + adapter_khz 3000 # Because the hardware cannot be interrogated for the protection state # of sectors, initialize all the sectors to be unprotected. The initial diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg index c467ae25b..c2fb7869d 100644 --- a/tcl/target/str750.cfg +++ b/tcl/target/str750.cfg @@ -19,7 +19,7 @@ if { [info exists CPUTAPID] } { } # jtag speed -jtag_khz 10 +adapter_khz 10 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst @@ -35,9 +35,9 @@ jtag_ntrst_delay 500 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi -$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-init { - jtag_khz 3000 + adapter_khz 3000 # Because the hardware cannot be interrogated for the protection state # of sectors, initialize all the sectors to be unprotected. The initial diff --git a/tcl/target/telo.cfg b/tcl/target/telo.cfg index 0cbdb816d..99b9cd693 100644 --- a/tcl/target/telo.cfg +++ b/tcl/target/telo.cfg @@ -26,12 +26,12 @@ reset_config trst_and_srst separate # issue telnet: reset init # issue gdb: monitor reset init $_TARGETNAME configure -event reset-init { - jtag_khz 100 + adapter_khz 100 # this will setup Telo board setupTelo #turn up the JTAG speed - jtag_khz 3000 - puts "JTAG speek now 3MHz" + adapter_khz 3000 + puts "JTAG speed now 3MHz" puts "type helpC100 to get help on C100" } @@ -58,4 +58,4 @@ set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME # writing data to memory does not work without this -memwrite burst disable \ No newline at end of file +memwrite burst disable