Create a init_board procedure for the ea dev board.
Signed-off-by: Chris Morgan <chmorgan@gmail.com> Change-Id: I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf Reviewed-on: http://openocd.zylin.com/510 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Chris Morgan
Spencer Oliver
parent
4aa63d59bd
commit
8fc35a696f
|
|
@ -1,24 +1,10 @@
|
||||||
# Embedded Artists eval board for LPC2478
|
# Embedded Artists eval board for LPC2478
|
||||||
# http://www.embeddedartists.com/
|
# http://www.embeddedartists.com/
|
||||||
|
|
||||||
# Delays on reset lines
|
|
||||||
adapter_nsrst_delay 500
|
|
||||||
jtag_ntrst_delay 1
|
|
||||||
|
|
||||||
# Adaptive JTAG clocking through RTCK.
|
|
||||||
#
|
|
||||||
jtag_rclk 20
|
|
||||||
|
|
||||||
# Target device: LPC2478
|
# Target device: LPC2478
|
||||||
set CCLK 72000
|
set CCLK 72000
|
||||||
source [find target/lpc2478.cfg]
|
source [find target/lpc2478.cfg]
|
||||||
|
|
||||||
# A working area will help speeding the flash programming
|
|
||||||
$_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0
|
|
||||||
|
|
||||||
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
|
|
||||||
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
|
|
||||||
|
|
||||||
# Helper
|
# Helper
|
||||||
#
|
#
|
||||||
proc read_register {register} {
|
proc read_register {register} {
|
||||||
|
|
@ -27,6 +13,106 @@ proc read_register {register} {
|
||||||
return $result(0)
|
return $result(0)
|
||||||
}
|
}
|
||||||
|
|
||||||
|
proc init_board {} {
|
||||||
|
# Delays on reset lines
|
||||||
|
adapter_nsrst_delay 500
|
||||||
|
jtag_ntrst_delay 1
|
||||||
|
|
||||||
|
# Adaptive JTAG clocking through RTCK.
|
||||||
|
#
|
||||||
|
jtag_rclk 20
|
||||||
|
|
||||||
|
global _TARGETNAME
|
||||||
|
global _CHIPNAME
|
||||||
|
|
||||||
|
# A working area will help speeding the flash programming
|
||||||
|
$_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0
|
||||||
|
|
||||||
|
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
|
||||||
|
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
|
||||||
|
|
||||||
|
# Event handlers
|
||||||
|
#
|
||||||
|
$_TARGETNAME configure -event reset-start {
|
||||||
|
# Back to the slow JTAG clock
|
||||||
|
jtag_rclk 20
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event reset-init {
|
||||||
|
arm core_state arm
|
||||||
|
arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer
|
||||||
|
arm7_9 fast_memory_access enable
|
||||||
|
|
||||||
|
# Peripheral clocks
|
||||||
|
mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value)
|
||||||
|
|
||||||
|
# Map the user flash to the vector table area (0x00...0x3F)
|
||||||
|
mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash
|
||||||
|
|
||||||
|
# Memory accelerator module
|
||||||
|
mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles
|
||||||
|
mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled
|
||||||
|
|
||||||
|
# Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0)
|
||||||
|
mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
|
||||||
|
# P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0,
|
||||||
|
# P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3
|
||||||
|
mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15
|
||||||
|
mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31
|
||||||
|
mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15
|
||||||
|
mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
|
||||||
|
# P4.25=WE, P4.30=CS0, P4.31=CS1
|
||||||
|
mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC
|
||||||
|
|
||||||
|
# Start PLL, then use faster JTAG clock
|
||||||
|
enable_pll
|
||||||
|
jtag_rclk 3000
|
||||||
|
|
||||||
|
# 16-bit flash @ CS0 (SST39VF3201-70)
|
||||||
|
mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on
|
||||||
|
mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0
|
||||||
|
mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0
|
||||||
|
mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0
|
||||||
|
mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0
|
||||||
|
mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0
|
||||||
|
mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0
|
||||||
|
|
||||||
|
# 8-bit NAND @ CS1
|
||||||
|
# TODO
|
||||||
|
|
||||||
|
# 32-bit SDRAM @ DYCS0 (K4M563233G-HN75)
|
||||||
|
mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig
|
||||||
|
mww 0xFFE08030 0x00000001 ;# EMCDynamicRP
|
||||||
|
mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS
|
||||||
|
mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX
|
||||||
|
mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR
|
||||||
|
mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL
|
||||||
|
mww 0xFFE08044 0x00000001 ;# EMCDynamicWR
|
||||||
|
mww 0xFFE08048 0x00000005 ;# EMCDynamicRC
|
||||||
|
mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC
|
||||||
|
mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR
|
||||||
|
mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD
|
||||||
|
mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD
|
||||||
|
#
|
||||||
|
mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0
|
||||||
|
mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0
|
||||||
|
sleep 100
|
||||||
|
mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP
|
||||||
|
sleep 10
|
||||||
|
mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL
|
||||||
|
mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh
|
||||||
|
sleep 100
|
||||||
|
mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE
|
||||||
|
mdw 0xA0011000 1 ;# Set SDRAM mode register
|
||||||
|
mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL
|
||||||
|
mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event gdb-attach {
|
||||||
|
# Without this gdb-attach will first time as probe will fail
|
||||||
|
reset init
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
# Enable the PLL.
|
# Enable the PLL.
|
||||||
# Generate maximum CPU clock (72 MHz) Run from internal RC oscillator.
|
# Generate maximum CPU clock (72 MHz) Run from internal RC oscillator.
|
||||||
|
|
@ -66,83 +152,3 @@ proc enable_pll {} {
|
||||||
mww 0xE01FC08C 0x00000055 ;# PLLFEED
|
mww 0xE01FC08C 0x00000055 ;# PLLFEED
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
# Event handlers
|
|
||||||
#
|
|
||||||
$_TARGETNAME configure -event reset-start {
|
|
||||||
# Back to the slow JTAG clock
|
|
||||||
jtag_rclk 20
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
$_TARGETNAME configure -event reset-init {
|
|
||||||
|
|
||||||
arm core_state arm
|
|
||||||
arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer
|
|
||||||
arm7_9 fast_memory_access enable
|
|
||||||
|
|
||||||
# Peripheral clocks
|
|
||||||
mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value)
|
|
||||||
|
|
||||||
# Map the user flash to the vector table area (0x00...0x3F)
|
|
||||||
mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash
|
|
||||||
|
|
||||||
# Memory accelerator module
|
|
||||||
mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles
|
|
||||||
mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled
|
|
||||||
|
|
||||||
# Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0)
|
|
||||||
mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
|
|
||||||
# P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0,
|
|
||||||
# P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3
|
|
||||||
mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15
|
|
||||||
mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31
|
|
||||||
mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15
|
|
||||||
mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
|
|
||||||
# P4.25=WE, P4.30=CS0, P4.31=CS1
|
|
||||||
mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC
|
|
||||||
|
|
||||||
# Start PLL, then use faster JTAG clock
|
|
||||||
enable_pll
|
|
||||||
jtag_rclk 3000
|
|
||||||
|
|
||||||
# 16-bit flash @ CS0 (SST39VF3201-70)
|
|
||||||
mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on
|
|
||||||
mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0
|
|
||||||
mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0
|
|
||||||
mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0
|
|
||||||
mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0
|
|
||||||
mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0
|
|
||||||
mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0
|
|
||||||
|
|
||||||
# 8-bit NAND @ CS1
|
|
||||||
# TODO
|
|
||||||
|
|
||||||
# 32-bit SDRAM @ DYCS0 (K4M563233G-HN75)
|
|
||||||
mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig
|
|
||||||
mww 0xFFE08030 0x00000001 ;# EMCDynamicRP
|
|
||||||
mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS
|
|
||||||
mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX
|
|
||||||
mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR
|
|
||||||
mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL
|
|
||||||
mww 0xFFE08044 0x00000001 ;# EMCDynamicWR
|
|
||||||
mww 0xFFE08048 0x00000005 ;# EMCDynamicRC
|
|
||||||
mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC
|
|
||||||
mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR
|
|
||||||
mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD
|
|
||||||
mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD
|
|
||||||
#
|
|
||||||
mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0
|
|
||||||
mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0
|
|
||||||
sleep 100
|
|
||||||
mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP
|
|
||||||
sleep 10
|
|
||||||
mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL
|
|
||||||
mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh
|
|
||||||
sleep 100
|
|
||||||
mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE
|
|
||||||
mdw 0xA0011000 1 ;# Set SDRAM mode register
|
|
||||||
mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL
|
|
||||||
mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue