jtag: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.

Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6216
Tested-by: jenkins

src/jtag/aice/aice_interface.c

@@ -436,7 +436,7 @@ static const struct command_registration aice_subcommand_handlers[] = {
 		.handler = &aice_handle_aice_desc_command,
 		.mode = COMMAND_CONFIG,
 		.help = "set the aice device description",
-		.usage = "[desciption string]",
+		.usage = "[description string]",
 	},
 	{
 		.name = "serial",

src/jtag/aice/aice_usb.c

@@ -2627,7 +2627,7 @@ static int aice_usb_halt(uint32_t coreid)
 
 	if (core_info[coreid].debug_under_dex_on) {
 		if (core_info[coreid].dex_use_psw_on == false) {
-			/* under debug 'debug mode', force $psw to 'debug mode' bahavior */
+			/* under debug 'debug mode', force $psw to 'debug mode' behavior */
 			/* !!!NOTICE!!! this is workaround for debug 'debug mode'.
 			 * it is only for debugging 'debug exception handler' purpose.
 			 * after openocd detaches from target, target behavior is

src/jtag/core.c

@@ -490,7 +490,7 @@ void jtag_add_tlr(void)
 
 /**
  * If supported by the underlying adapter, this clocks a raw bit sequence
- * onto TMS for switching betwen JTAG and SWD modes.
+ * onto TMS for switching between JTAG and SWD modes.
  *
  * DO NOT use this to bypass the integrity checks and logging provided
  * by the jtag_add_pathmove() and jtag_add_statemove() calls.
@@ -1343,7 +1343,7 @@ static int jtag_validate_ircapture(void)
 	int chain_pos = 0;
 	int retval;
 
-	/* when autoprobing, accomodate huge IR lengths */
+	/* when autoprobing, accommodate huge IR lengths */
 	for (tap = NULL, total_ir_length = 0;
 			(tap = jtag_tap_next_enabled(tap)) != NULL;
 			total_ir_length += tap->ir_length) {

src/jtag/drivers/cmsis_dap_usb_bulk.c

@@ -262,7 +262,7 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p
 				 * - config asked explicitly for an interface number
 				 * - the device has only one interface
 				 * The later two cases should be honored only if we know
-				 * we are on the rigt device */
+				 * we are on the right device */
 				bool intf_identified_reliably = cmsis_dap_in_interface_str
 							|| (device_identified_reliably &&
 									(cmsis_dap_usb_interface != -1

src/jtag/drivers/jtag_dpi.c

@@ -301,7 +301,7 @@ static int jtag_dpi_init(void)
 	serv_addr.sin_addr.s_addr = inet_addr(server_address);
 
 	if (serv_addr.sin_addr.s_addr == INADDR_NONE) {
-		LOG_ERROR("inet_addr error occured");
+		LOG_ERROR("inet_addr error occurred");
 		return ERROR_FAIL;
 	}
 

src/jtag/drivers/nulink_usb.c

@@ -844,11 +844,11 @@ static int nulink_usb_read_mem(void *handle, uint32_t addr, uint32_t size,
 		/* the nulink only supports 8/32bit memory read/writes
 		 * honour 32bit, all others will be handled as 8bit access */
 		if (size == 4) {
-			/* When in jtag mode the nulink uses the auto-increment functinality.
+			/* When in jtag mode the nulink uses the auto-increment functionality.
 			 * However it expects us to pass the data correctly, this includes
 			 * alignment and any page boundaries. We already do this as part of the
 			 * adi_v5 implementation, but the nulink is a hla adapter and so this
-			 * needs implementiong manually.
+			 * needs implementing manually.
 			 * currently this only affects jtag mode, they do single
 			 * access in SWD mode - but this may change and so we do it for both modes */
 
@@ -909,11 +909,11 @@ static int nulink_usb_write_mem(void *handle, uint32_t addr, uint32_t size,
 		/* the nulink only supports 8/32bit memory read/writes
 		 * honour 32bit, all others will be handled as 8bit access */
 		if (size == 4) {
-			/* When in jtag mode the nulink uses the auto-increment functinality.
+			/* When in jtag mode the nulink uses the auto-increment functionality.
 			 * However it expects us to pass the data correctly, this includes
 			 * alignment and any page boundaries. We already do this as part of the
 			 * adi_v5 implementation, but the nulink is a hla adapter and so this
-			 * needs implementiong manually.
+			 * needs implementing manually.
 			 * currently this only affects jtag mode, do single
 			 * access in SWD mode - but this may change and so we do it for both modes */
 

src/jtag/drivers/usb_blaster/usb_blaster.c

@@ -561,8 +561,8 @@ static int ublast_read_byteshifted_tdos(uint8_t *buf, int nb_bytes)
  *  - first bit is stored in byte0, bit0 (LSB)
  *  - second bit is stored in byte0, bit 1
  *  ...
- *  - eight bit is sotred in byte0, bit 7
- *  - ninth bit is sotred in byte1, bit 0
+ *  - eight bit is stored in byte0, bit 7
+ *  - ninth bit is stored in byte1, bit 0
  *  - etc ...
  *
  * Returns ERROR_OK if OK, ERROR_xxx if a read error occurred

src/jtag/minidriver.h

@@ -32,7 +32,7 @@
  * interface functions, instead of the built-in asynchronous driver
  * module that is used by the standard JTAG interface drivers.
  *
- * In addtion to the functions defined in the @c minidriver.h file, the
+ * In addition to the functions defined in the @c minidriver.h file, the
  * @c jtag_minidriver.h file must declare the following functions (or
  * define static inline versions of them):
  * - jtag_add_callback