From 888d5a5ec9f0e2178241c7fda99558d2e33a06a5 Mon Sep 17 00:00:00 2001 From: Marc Schink Date: Fri, 8 Apr 2016 10:57:11 +0200 Subject: [PATCH] interface/jlink: Fix comment about serial number Leading zeros for the serial number are not necessary anymore. Signed-off-by: Marc Schink Change-Id: Ie4ff47b9cda7ccf314c6fda9a2784947db5ee4d9 Reviewed-on: http://openocd.zylin.com/3401 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/interface/jlink.cfg | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/tcl/interface/jlink.cfg b/tcl/interface/jlink.cfg index 3d83362a6..a4f9dddd7 100644 --- a/tcl/interface/jlink.cfg +++ b/tcl/interface/jlink.cfg @@ -1,19 +1,14 @@ # -# Segger J-Link +# SEGGER J-Link # # http://www.segger.com/jlink.html # interface jlink - -# The serial number can be used to select a specific interface in case more than one -# is connected to the host. +# The serial number can be used to select a specific device in case more than +# one is connected to the host. # -# Segger software omits leading zeros in serial number displays, -# OpenOCD requires them. +# Example: Select J-Link with serial number 123456789 # -# Example: Select J-Link with serial 123456789 -# -# jlink serial 000123456789 - +# jlink serial 123456789