diff --git a/configure.ac b/configure.ac index 22d6193c4..771e6917e 100644 --- a/configure.ac +++ b/configure.ac @@ -3,12 +3,12 @@ AC_INIT([openocd], [0.6.0-dev], [OpenOCD Mailing List ]) AC_CONFIG_SRCDIR([src/openocd.c]) -m4_include(config_subdir.m4)dnl +m4_include([config_subdir.m4])dnl AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip]) AM_MAINTAINER_MODE -AM_CONFIG_HEADER(config.h) +AM_CONFIG_HEADER([config.h]) AH_BOTTOM([ #include #include @@ -26,19 +26,17 @@ m4_defun([_LT_AC_LANG_F77_CONFIG], [:]) m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:]) AC_DISABLE_SHARED AC_PROG_LIBTOOL -AC_SUBST(LIBTOOL_DEPS) - +AC_SUBST([LIBTOOL_DEPS]) dnl configure checks required for Jim files (these are obsolete w/ C99) AC_C_CONST AC_TYPE_LONG_LONG_INT - AC_SEARCH_LIBS([ioperm], [ioperm]) AC_SEARCH_LIBS([dlopen], [dl]) -AC_CHECK_HEADERS(sys/socket.h) -AC_CHECK_HEADERS(arpa/inet.h, [], [], [dnl +AC_CHECK_HEADERS([sys/socket.h]) +AC_CHECK_HEADERS([arpa/inet.h], [], [], [dnl #include #ifdef STDC_HEADERS # include @@ -52,10 +50,10 @@ AC_CHECK_HEADERS(arpa/inet.h, [], [], [dnl # include #endif ]) -AC_CHECK_HEADERS(elf.h) -AC_CHECK_HEADERS(dirent.h) -AC_CHECK_HEADERS(fcntl.h) -AC_CHECK_HEADERS(ifaddrs.h, [], [], [dnl +AC_CHECK_HEADERS([elf.h]) +AC_CHECK_HEADERS([dirent.h]) +AC_CHECK_HEADERS([fcntl.h]) +AC_CHECK_HEADERS([ifaddrs.h], [], [], [dnl #include #ifdef STDC_HEADERS # include @@ -69,8 +67,8 @@ AC_CHECK_HEADERS(ifaddrs.h, [], [], [dnl # include #endif ]) -AC_CHECK_HEADERS(malloc.h) -AC_CHECK_HEADERS(netdb.h) +AC_CHECK_HEADERS([malloc.h]) +AC_CHECK_HEADERS([netdb.h]) AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl #include #ifdef STDC_HEADERS @@ -85,7 +83,7 @@ AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl # include #endif ]) -AC_CHECK_HEADERS(netinet/tcp.h, [], [], [dnl +AC_CHECK_HEADERS([netinet/tcp.h], [], [], [dnl #include #ifdef STDC_HEADERS # include @@ -99,16 +97,16 @@ AC_CHECK_HEADERS(netinet/tcp.h, [], [], [dnl # include #endif ]) -AC_CHECK_HEADERS(pthread.h) -AC_CHECK_HEADERS(strings.h) -AC_CHECK_HEADERS(sys/ioctl.h) -AC_CHECK_HEADERS(sys/param.h) -AC_CHECK_HEADERS(sys/poll.h) -AC_CHECK_HEADERS(sys/select.h) -AC_CHECK_HEADERS(sys/stat.h) -AC_CHECK_HEADERS(sys/time.h) -AC_CHECK_HEADERS(sys/types.h) -AC_CHECK_HEADERS(unistd.h) +AC_CHECK_HEADERS([pthread.h]) +AC_CHECK_HEADERS([strings.h]) +AC_CHECK_HEADERS([sys/ioctl.h]) +AC_CHECK_HEADERS([sys/param.h]) +AC_CHECK_HEADERS([sys/poll.h]) +AC_CHECK_HEADERS([sys/select.h]) +AC_CHECK_HEADERS([sys/stat.h]) +AC_CHECK_HEADERS([sys/time.h]) +AC_CHECK_HEADERS([sys/types.h]) +AC_CHECK_HEADERS([unistd.h]) AC_CHECK_HEADERS([net/if.h], [], [], [dnl #include #ifdef STDC_HEADERS @@ -130,11 +128,11 @@ AC_HEADER_TIME AC_C_BIGENDIAN -AC_CHECK_FUNCS(strndup) -AC_CHECK_FUNCS(strnlen) -AC_CHECK_FUNCS(gettimeofday) -AC_CHECK_FUNCS(usleep) -AC_CHECK_FUNCS(vasprintf) +AC_CHECK_FUNCS([strndup]) +AC_CHECK_FUNCS([strnlen]) +AC_CHECK_FUNCS([gettimeofday]) +AC_CHECK_FUNCS([usleep]) +AC_CHECK_FUNCS([vasprintf]) build_bitbang=no build_bitq=no @@ -150,7 +148,7 @@ if test -x $srcdir/guess-rev.sh ; then else build_release=yes fi -AC_MSG_RESULT($build_release) +AC_MSG_RESULT([$build_release]) # We are not *ALWAYS* being installed in the standard place. # We may be installed in a "tool-build" specific location. @@ -273,33 +271,31 @@ AC_ARG_WITH(ftd2xx-lib, with_ftd2xx_lib=static ]) - -AC_ARG_ENABLE(doxygen-html, +AC_ARG_ENABLE([doxygen-html], AS_HELP_STRING([--disable-doxygen-html], [Disable building Doxygen manual as HTML.]), [doxygen_as_html=$enableval], [doxygen_as_html=yes]) -AC_SUBST(doxygen_as_html) +AC_SUBST([doxygen_as_html]) AC_MSG_CHECKING([whether to build Doxygen as HTML]) -AC_MSG_RESULT($doxygen_as_html) +AC_MSG_RESULT([$doxygen_as_html]) -AC_ARG_ENABLE(doxygen-pdf, +AC_ARG_ENABLE([doxygen-pdf], AS_HELP_STRING([--enable-doxygen-pdf], [Enable building Doxygen manual as PDF.]), [doxygen_as_pdf=$enableval], [doxygen_as_pdf=no]) -AC_SUBST(doxygen_as_pdf) +AC_SUBST([doxygen_as_pdf]) AC_MSG_CHECKING([whether to build Doxygen as PDF]) -AC_MSG_RESULT($doxygen_as_pdf) +AC_MSG_RESULT([$doxygen_as_pdf]) - -AC_ARG_ENABLE(gccwarnings, +AC_ARG_ENABLE([gccwarnings], AS_HELP_STRING([--disable-gccwarnings], [Disable compiler warnings]), [gcc_warnings=$enableval], [gcc_warnings=yes]) -AC_ARG_ENABLE(wextra, +AC_ARG_ENABLE([wextra], AS_HELP_STRING([--disable-wextra], [Disable extra compiler warnings]), [gcc_wextra=$enableval], [gcc_wextra=$gcc_warnings]) -AC_ARG_ENABLE(werror, +AC_ARG_ENABLE([werror], AS_HELP_STRING([--disable-werror], [Do not treat warnings as errors]), [gcc_werror=$enableval], [gcc_werror=$gcc_warnings]) @@ -308,7 +304,7 @@ debug_jtag_io=no debug_usb_io=no debug_usb_comms=no -AC_ARG_ENABLE(verbose, +AC_ARG_ENABLE([verbose], AS_HELP_STRING([--enable-verbose], [Enable verbose JTAG I/O messages (for debugging).]), [ @@ -317,112 +313,112 @@ AC_ARG_ENABLE(verbose, debug_usb_comms=$enableval ], []) -AC_ARG_ENABLE(verbose_jtag_io, +AC_ARG_ENABLE([verbose_jtag_io], AS_HELP_STRING([--enable-verbose-jtag-io], [Enable verbose JTAG I/O messages (for debugging).]), [debug_jtag_io=$enableval], []) -AC_ARG_ENABLE(verbose_usb_io, + +AC_ARG_ENABLE([verbose_usb_io], AS_HELP_STRING([--enable-verbose-usb-io], [Enable verbose USB I/O messages (for debugging)]), [debug_usb_io=$enableval], []) -AC_ARG_ENABLE(verbose_usb_comms, + +AC_ARG_ENABLE([verbose_usb_comms], AS_HELP_STRING([--enable-verbose-usb-comms], [Enable verbose USB communication messages (for debugging)]), [debug_usb_comms=$enableval], []) AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]); -AC_MSG_RESULT($debug_jtag_io) +AC_MSG_RESULT([$debug_jtag_io]) if test $debug_jtag_io = yes; then AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages]) fi AC_MSG_CHECKING([whether to enable verbose USB I/O messages]); -AC_MSG_RESULT($debug_usb_io) +AC_MSG_RESULT([$debug_usb_io]) if test $debug_usb_io = yes; then AC_DEFINE([_DEBUG_USB_IO_],[1], [Print verbose USB I/O messages]) fi AC_MSG_CHECKING([whether to enable verbose USB communication messages]); -AC_MSG_RESULT($debug_usb_comms) +AC_MSG_RESULT([$debug_usb_comms]) if test $debug_usb_comms = yes; then AC_DEFINE([_DEBUG_USB_COMMS_],[1], [Print verbose USB communication messages]) fi - debug_malloc=no -AC_ARG_ENABLE(malloc_logging, +AC_ARG_ENABLE([malloc_logging], AS_HELP_STRING([--enable-malloc-logging], [Include free space in logging messages (requires malloc.h).]), [debug_malloc=$enableval], []) AC_MSG_CHECKING([whether to enable malloc free space logging]); -AC_MSG_RESULT($debug_malloc) +AC_MSG_RESULT([$debug_malloc]) if test $debug_malloc = yes; then AC_DEFINE([_DEBUG_FREE_SPACE_],[1], [Include malloc free space in logging]) fi - -AC_ARG_ENABLE(dummy, +AC_ARG_ENABLE([dummy], AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]), [build_dummy=$enableval], [build_dummy=no]) -AC_ARG_ENABLE(parport, +AC_ARG_ENABLE([parport], AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]), [build_parport=$enableval], [build_parport=no]) -AC_ARG_ENABLE(parport_ppdev, +AC_ARG_ENABLE([parport_ppdev], AS_HELP_STRING([--disable-parport-ppdev], [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]), [parport_use_ppdev=$enableval], [parport_use_ppdev=yes]) -AC_ARG_ENABLE(parport_giveio, +AC_ARG_ENABLE([parport_giveio], AS_HELP_STRING([--enable-parport-giveio], [Enable use of giveio for parport (for CygWin only)]), [parport_use_giveio=$enableval], [parport_use_giveio=]) -AC_ARG_ENABLE(ft2232_libftdi, +AC_ARG_ENABLE([ft2232_libftdi], AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]), [build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no]) -AC_ARG_ENABLE(ft2232_ftd2xx, +AC_ARG_ENABLE([ft2232_ftd2xx], AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]), [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no]) -AC_ARG_ENABLE(usb_blaster_libftdi, +AC_ARG_ENABLE([usb_blaster_libftdi], AS_HELP_STRING([--enable-usb_blaster_libftdi], [Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX]), [build_usb_blaster_libftdi=$enableval], [build_usb_blaster_libftdi=no]) -AC_ARG_ENABLE(usb_blaster_ftd2xx, +AC_ARG_ENABLE([usb_blaster_ftd2xx], AS_HELP_STRING([--enable-usb_blaster_ftd2xx], [Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com]), [build_usb_blaster_ftd2xx=$enableval], [build_usb_blaster_ftd2xx=no]) -AC_ARG_ENABLE(amtjtagaccel, +AC_ARG_ENABLE([amtjtagaccel], AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]), [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no]) -AC_ARG_ENABLE(ecosboard, +AC_ARG_ENABLE([ecosboard], AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]), [build_ecosboard=$enableval], [build_ecosboard=no]) -AC_ARG_ENABLE(zy1000_master, +AC_ARG_ENABLE([zy1000_master], AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]), [build_zy1000_master=$enableval], [build_zy1000_master=no]) -AC_ARG_ENABLE(zy1000, +AC_ARG_ENABLE([zy1000], AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]), [build_zy1000=$enableval], [build_zy1000=no]) -AC_ARG_ENABLE(ioutil, +AC_ARG_ENABLE([ioutil], AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]), [build_ioutil=$enableval], [build_ioutil=no]) case "${host_cpu}" in arm*) - AC_ARG_ENABLE(ep93xx, + AC_ARG_ENABLE([ep93xx], AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]), [build_ep93xx=$enableval], [build_ep93xx=no]) - AC_ARG_ENABLE(at91rm9200, + AC_ARG_ENABLE([at91rm9200], AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]), [build_at91rm9200=$enableval], [build_at91rm9200=no]) ;; @@ -433,60 +429,60 @@ case "${host_cpu}" in ;; esac -AC_ARG_ENABLE(gw16012, +AC_ARG_ENABLE([gw16012], AS_HELP_STRING([--enable-gw16012], [Enable building support for the Gateworks GW16012 JTAG Programmer]), [build_gw16012=$enableval], [build_gw16012=no]) -AC_ARG_ENABLE(presto_libftdi, +AC_ARG_ENABLE([presto_libftdi], AS_HELP_STRING([--enable-presto_libftdi], [Enable building support for ASIX Presto Programmer using the libftdi driver]), [build_presto_libftdi=$enableval], [build_presto_libftdi=no]) -AC_ARG_ENABLE(presto_ftd2xx, +AC_ARG_ENABLE([presto_ftd2xx], AS_HELP_STRING([--enable-presto_ftd2xx], [Enable building support for ASIX Presto Programmer using the FTD2XX driver]), [build_presto_ftd2xx=$enableval], [build_presto_ftd2xx=no]) -AC_ARG_ENABLE(usbprog, +AC_ARG_ENABLE([usbprog], AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]), [build_usbprog=$enableval], [build_usbprog=no]) -AC_ARG_ENABLE(oocd_trace, +AC_ARG_ENABLE([oocd_trace], AS_HELP_STRING([--enable-oocd_trace], [Enable building support for some prototype OpenOCD+trace ETM capture hardware]), [build_oocd_trace=$enableval], [build_oocd_trace=no]) -AC_ARG_ENABLE(jlink, +AC_ARG_ENABLE([jlink], AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]), [build_jlink=$enableval], [build_jlink=no]) -AC_ARG_ENABLE(vsllink, +AC_ARG_ENABLE([vsllink], AS_HELP_STRING([--enable-vsllink], [Enable building support for the Versaloon-Link JTAG Programmer]), [build_vsllink=$enableval], [build_vsllink=no]) -AC_ARG_ENABLE(rlink, +AC_ARG_ENABLE([rlink], AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]), [build_rlink=$enableval], [build_rlink=no]) -AC_ARG_ENABLE(ulink, +AC_ARG_ENABLE([ulink], AS_HELP_STRING([--enable-ulink], [Enable building support for the Keil ULINK JTAG Programmer]), [build_ulink=$enableval], [build_ulink=no]) -AC_ARG_ENABLE(arm-jtag-ew, +AC_ARG_ENABLE([arm-jtag-ew], AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]), [build_armjtagew=$enableval], [build_armjtagew=no]) -AC_ARG_ENABLE(buspirate, +AC_ARG_ENABLE([buspirate], AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]), [build_buspirate=$enableval], [build_buspirate=no]) -AC_ARG_ENABLE(minidriver_dummy, +AC_ARG_ENABLE([minidriver_dummy], AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]), [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no]) -AC_ARG_ENABLE(internal-jimtcl, +AC_ARG_ENABLE([internal-jimtcl], AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]), [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes]) -AC_ARG_ENABLE(libusb0, +AC_ARG_ENABLE([libusb0], AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]), [check_libusb0=$enableval], [check_libusb0=no]) @@ -496,28 +492,27 @@ if test $build_zy1000 = yes; then if test $build_minidriver = yes; then AC_MSG_ERROR([Multiple minidriver options have been enabled.]) fi - AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1, + AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1], [Define to 1 if you have the header file.]) build_minidriver=yes fi -AC_MSG_RESULT($build_zy1000) +AC_MSG_RESULT([$build_zy1000]) -AC_ARG_ENABLE(remote-bitbang, +AC_ARG_ENABLE([remote-bitbang], AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]), [build_remote_bitbang=$enableval], [build_remote_bitbang=no]) - AC_MSG_CHECKING([whether to enable dummy minidriver]) if test $build_minidriver_dummy = yes; then if test $build_minidriver = yes; then AC_MSG_ERROR([Multiple minidriver options have been enabled.]) fi build_minidriver=yes - AC_DEFINE(BUILD_MINIDRIVER_DUMMY, 1, [Use the dummy minidriver.]) - AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1, + AC_DEFINE([BUILD_MINIDRIVER_DUMMY], [1], [Use the dummy minidriver.]) + AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1], [Define to 1 if you have the header file.]) fi -AC_MSG_RESULT($build_minidriver_dummy) +AC_MSG_RESULT([$build_minidriver_dummy]) AC_MSG_CHECKING([whether standard drivers can be built]) if test "$build_minidriver" = yes; then @@ -547,7 +542,7 @@ case $host in AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[return __MINGW32__;]])], [is_mingw=yes],[is_mingw=no]) if test $is_mingw = yes; then - AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.]) + AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.]) if test x$parport_use_giveio = xno; then AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts]) fi @@ -555,15 +550,15 @@ case $host in is_cygwin=no else is_cygwin=yes - AC_DEFINE(IS_CYGWIN, 1, [1 if building for Cygwin.]) + AC_DEFINE([IS_CYGWIN], [1], [1 if building for Cygwin.]) # sys/io.h needed under cygwin for parport access if test $build_parport = yes; then - AC_CHECK_HEADERS(sys/io.h,[],AC_MSG_ERROR([Please install the cygwin ioperm package])) + AC_CHECK_HEADERS([sys/io.h],[],AC_MSG_ERROR([Please install the cygwin ioperm package])) fi fi - AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.]) - AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.]) + AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.]) + AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.]) ;; *-mingw*) is_mingw=yes @@ -581,9 +576,9 @@ case $host in CFLAGS="$CFLAGS -D__USE_MINGW_ANSI_STDIO" - AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.]) - AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.]) - AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.]) + AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.]) + AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.]) + AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.]) ;; *darwin*) is_darwin=yes @@ -593,189 +588,189 @@ case $host in fi parport_use_giveio=no - AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.]) - AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.]) - AC_DEFINE(IS_DARWIN, 1, [1 if building for Darwin.]) + AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.]) + AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.]) + AC_DEFINE([IS_DARWIN], [1], [1 if building for Darwin.]) ;; *) if test x$parport_use_giveio = xyes; then AC_MSG_WARN([--enable-parport-giveio cannot be used by ]$host[ hosts]) fi parport_use_giveio=no - AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.]) - AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.]) - AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.]) + AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.]) + AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.]) + AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.]) ;; esac if test $build_parport = yes; then build_bitbang=yes - AC_DEFINE(BUILD_PARPORT, 1, [1 if you want parport.]) + AC_DEFINE([BUILD_PARPORT], [1], [1 if you want parport.]) else - AC_DEFINE(BUILD_PARPORT, 0, [0 if you don't want parport.]) + AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.]) fi if test $build_dummy = yes; then build_bitbang=yes - AC_DEFINE(BUILD_DUMMY, 1, [1 if you want dummy driver.]) + AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.]) else - AC_DEFINE(BUILD_DUMMY, 0, [0 if you don't want dummy driver.]) + AC_DEFINE([BUILD_DUMMY], [0], [0 if you don't want dummy driver.]) fi if test $build_ep93xx = yes; then build_bitbang=yes - AC_DEFINE(BUILD_EP93XX, 1, [1 if you want ep93xx.]) + AC_DEFINE([BUILD_EP93XX], [1], [1 if you want ep93xx.]) else - AC_DEFINE(BUILD_EP93XX, 0, [0 if you don't want ep93xx.]) + AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.]) fi if test $build_ecosboard = yes; then - AC_DEFINE(BUILD_ECOSBOARD, 1, [1 if you want eCosBoard.]) + AC_DEFINE([BUILD_ECOSBOARD], [1], [1 if you want eCosBoard.]) else - AC_DEFINE(BUILD_ECOSBOARD, 0, [0 if you don't want eCosBoard.]) + AC_DEFINE([BUILD_ECOSBOARD], [0], [0 if you don't want eCosBoard.]) fi if test $build_zy1000 = yes; then - AC_DEFINE(BUILD_ZY1000, 1, [1 if you want ZY1000.]) + AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.]) else - AC_DEFINE(BUILD_ZY1000, 0, [0 if you don't want ZY1000.]) + AC_DEFINE([BUILD_ZY1000], [0], [0 if you don't want ZY1000.]) fi if test $build_zy1000_master = yes; then - AC_DEFINE(BUILD_ZY1000_MASTER, 1, [1 if you want ZY1000 JTAG master registers.]) + AC_DEFINE([BUILD_ZY1000_MASTER], [1], [1 if you want ZY1000 JTAG master registers.]) else - AC_DEFINE(BUILD_ZY1000_MASTER, 0, [0 if you don't want ZY1000 JTAG master registers.]) + AC_DEFINE([BUILD_ZY1000_MASTER], [0], [0 if you don't want ZY1000 JTAG master registers.]) fi if test $build_at91rm9200 = yes; then build_bitbang=yes - AC_DEFINE(BUILD_AT91RM9200, 1, [1 if you want at91rm9200.]) + AC_DEFINE([BUILD_AT91RM9200], [1], [1 if you want at91rm9200.]) else - AC_DEFINE(BUILD_AT91RM9200, 0, [0 if you don't want at91rm9200.]) + AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.]) fi if test x$parport_use_ppdev = xyes; then - AC_DEFINE(PARPORT_USE_PPDEV, 1, [1 if you want parport to use ppdev.]) + AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.]) else - AC_DEFINE(PARPORT_USE_PPDEV, 0, [0 if you don't want parport to use ppdev.]) + AC_DEFINE([PARPORT_USE_PPDEV], [0], [0 if you don't want parport to use ppdev.]) fi if test x$parport_use_giveio = xyes; then - AC_DEFINE(PARPORT_USE_GIVEIO, 1, [1 if you want parport to use giveio.]) + AC_DEFINE([PARPORT_USE_GIVEIO], [1], [1 if you want parport to use giveio.]) else - AC_DEFINE(PARPORT_USE_GIVEIO, 0, [0 if you don't want parport to use giveio.]) + AC_DEFINE([PARPORT_USE_GIVEIO], [0], [0 if you don't want parport to use giveio.]) fi if test $build_bitbang = yes; then - AC_DEFINE(BUILD_BITBANG, 1, [1 if you want a bitbang interface.]) + AC_DEFINE([BUILD_BITBANG], [1], [1 if you want a bitbang interface.]) else - AC_DEFINE(BUILD_BITBANG, 0, [0 if you don't want a bitbang interface.]) + AC_DEFINE([BUILD_BITBANG], [0], [0 if you don't want a bitbang interface.]) fi if test $build_ft2232_libftdi = yes; then - AC_DEFINE(BUILD_FT2232_LIBFTDI, 1, [1 if you want libftdi ft2232.]) + AC_DEFINE([BUILD_FT2232_LIBFTDI], [1], [1 if you want libftdi ft2232.]) else - AC_DEFINE(BUILD_FT2232_LIBFTDI, 0, [0 if you don't want libftdi ft2232.]) + AC_DEFINE([BUILD_FT2232_LIBFTDI], [0], [0 if you don't want libftdi ft2232.]) fi if test $build_ft2232_ftd2xx = yes; then - AC_DEFINE(BUILD_FT2232_FTD2XX, 1, [1 if you want ftd2xx ft2232.]) + AC_DEFINE([BUILD_FT2232_FTD2XX], [1], [1 if you want ftd2xx ft2232.]) else - AC_DEFINE(BUILD_FT2232_FTD2XX, 0, [0 if you don't want ftd2xx ft2232.]) + AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.]) fi if test $build_usb_blaster_libftdi = yes; then build_bitbang=yes - AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 1, [1 if you want libftdi usb_blaster.]) + AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.]) else - AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 0, [0 if you don't want libftdi usb_blaster.]) + AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.]) fi if test $build_usb_blaster_ftd2xx = yes; then build_bitbang=yes - AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 1, [1 if you want ftd2xx usb_blaster.]) + AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.]) else - AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 0, [0 if you don't want ftd2xx usb_blaster.]) + AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.]) fi if test $build_amtjtagaccel = yes; then - AC_DEFINE(BUILD_AMTJTAGACCEL, 1, [1 if you want the Amontec JTAG-Accelerator driver.]) + AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.]) else - AC_DEFINE(BUILD_AMTJTAGACCEL, 0, [0 if you don't want the Amontec JTAG-Accelerator driver.]) + AC_DEFINE([BUILD_AMTJTAGACCEL], [0], [0 if you don't want the Amontec JTAG-Accelerator driver.]) fi if test $build_gw16012 = yes; then - AC_DEFINE(BUILD_GW16012, 1, [1 if you want the Gateworks GW16012 driver.]) + AC_DEFINE([BUILD_GW16012], [1], [1 if you want the Gateworks GW16012 driver.]) else - AC_DEFINE(BUILD_GW16012, 0, [0 if you don't want the Gateworks GW16012 driver.]) + AC_DEFINE([BUILD_GW16012], [0], [0 if you don't want the Gateworks GW16012 driver.]) fi if test $build_presto_libftdi = yes; then build_bitq=yes - AC_DEFINE(BUILD_PRESTO_LIBFTDI, 1, [1 if you want the ASIX PRESTO driver using libftdi.]) + AC_DEFINE([BUILD_PRESTO_LIBFTDI], [1], [1 if you want the ASIX PRESTO driver using libftdi.]) else - AC_DEFINE(BUILD_PRESTO_LIBFTDI, 0, [0 if you don't want the ASIX PRESTO driver using libftdi.]) + AC_DEFINE([BUILD_PRESTO_LIBFTDI], [0], [0 if you don't want the ASIX PRESTO driver using libftdi.]) fi if test $build_presto_ftd2xx = yes; then build_bitq=yes - AC_DEFINE(BUILD_PRESTO_FTD2XX, 1, [1 if you want the ASIX PRESTO driver using FTD2XX.]) + AC_DEFINE([BUILD_PRESTO_FTD2XX], [1], [1 if you want the ASIX PRESTO driver using FTD2XX.]) else - AC_DEFINE(BUILD_PRESTO_FTD2XX, 0, [0 if you don't want the ASIX PRESTO driver using FTD2XX.]) + AC_DEFINE([BUILD_PRESTO_FTD2XX], [0], [0 if you don't want the ASIX PRESTO driver using FTD2XX.]) fi if test $build_bitq = yes; then - AC_DEFINE(BUILD_BITQ, 1, [1 if you want a bitq interface.]) + AC_DEFINE([BUILD_BITQ], [1], [1 if you want a bitq interface.]) else - AC_DEFINE(BUILD_BITQ, 0, [0 if you don't want a bitq interface.]) + AC_DEFINE([BUILD_BITQ], [0], [0 if you don't want a bitq interface.]) fi if test $build_usbprog = yes; then - AC_DEFINE(BUILD_USBPROG, 1, [1 if you want the usbprog JTAG driver.]) + AC_DEFINE([BUILD_USBPROG], [1], [1 if you want the usbprog JTAG driver.]) else - AC_DEFINE(BUILD_USBPROG, 0, [0 if you don't want the usbprog JTAG driver.]) + AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.]) fi if test $build_oocd_trace = yes; then - AC_DEFINE(BUILD_OOCD_TRACE, 1, [1 if you want the OpenOCD+trace ETM capture driver.]) + AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.]) else - AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.]) + AC_DEFINE([BUILD_OOCD_TRACE], [0], [0 if you don't want the OpenOCD+trace ETM capture driver.]) fi if test $build_jlink = yes; then - AC_DEFINE(BUILD_JLINK, 1, [1 if you want the J-Link JTAG driver.]) + AC_DEFINE([BUILD_JLINK], [1], [1 if you want the J-Link JTAG driver.]) else - AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.]) + AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.]) fi if test $build_vsllink = yes; then - AC_DEFINE(BUILD_VSLLINK, 1, [1 if you want the Versaloon-Link JTAG driver.]) + AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.]) else - AC_DEFINE(BUILD_VSLLINK, 0, [0 if you don't want the Versaloon-Link JTAG driver.]) + AC_DEFINE([BUILD_VSLLINK], [0], [0 if you don't want the Versaloon-Link JTAG driver.]) fi if test $build_rlink = yes; then - AC_DEFINE(BUILD_RLINK, 1, [1 if you want the RLink JTAG driver.]) + AC_DEFINE([BUILD_RLINK], [1], [1 if you want the RLink JTAG driver.]) else - AC_DEFINE(BUILD_RLINK, 0, [0 if you don't want the RLink JTAG driver.]) + AC_DEFINE([BUILD_RLINK], [0], [0 if you don't want the RLink JTAG driver.]) fi if test $build_ulink = yes; then - AC_DEFINE(BUILD_ULINK, 1, [1 if you want the ULINK JTAG driver.]) + AC_DEFINE([BUILD_ULINK], [1], [1 if you want the ULINK JTAG driver.]) else - AC_DEFINE(BUILD_ULINK, 0, [0 if you don't want the ULINK JTAG driver.]) + AC_DEFINE([BUILD_ULINK], [0], [0 if you don't want the ULINK JTAG driver.]) fi if test $build_armjtagew = yes; then - AC_DEFINE(BUILD_ARMJTAGEW, 1, [1 if you want the ARM-JTAG-EW JTAG driver.]) + AC_DEFINE([BUILD_ARMJTAGEW], [1], [1 if you want the ARM-JTAG-EW JTAG driver.]) else - AC_DEFINE(BUILD_ARMJTAGEW, 0, [0 if you don't want the ARM-JTAG-EW JTAG driver.]) + AC_DEFINE([BUILD_ARMJTAGEW], [0], [0 if you don't want the ARM-JTAG-EW JTAG driver.]) fi if test $build_buspirate = yes; then - AC_DEFINE(BUILD_BUSPIRATE, 1, [1 if you want the Buspirate JTAG driver.]) + AC_DEFINE([BUILD_BUSPIRATE], [1], [1 if you want the Buspirate JTAG driver.]) else - AC_DEFINE(BUILD_BUSPIRATE, 0, [0 if you don't want the Buspirate JTAG driver.]) + AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.]) fi if test "$use_internal_jimtcl" = yes; then @@ -788,9 +783,9 @@ fi if test $build_remote_bitbang = yes; then build_bitbang=yes - AC_DEFINE(BUILD_REMOTE_BITBANG, 1, [1 if you want the Remote Bitbang JTAG driver.]) + AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang JTAG driver.]) else - AC_DEFINE(BUILD_REMOTE_BITBNAG, 0, [0 if you don't want the Remote Bitbang JTAG driver.]) + AC_DEFINE([BUILD_REMOTE_BITBNAG], [0], [0 if you don't want the Remote Bitbang JTAG driver.]) fi #-- Deal with MingW/Cygwin FTD2XX issues @@ -979,7 +974,7 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ DWORD x = FT_DEVICE_4232H; ]], [])], [ - AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1], + AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1], [Support FT2232H/FT4232HS with FTD2XX or libftdi.]) build_ft2232_highspeed=yes ], [ @@ -1037,7 +1032,7 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[ enum ftdi_chip_type x = TYPE_2232H; ]])], [ - AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1], + AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1], [Support FT2232H/FT4232HS with FTD2XX or libftdi.]) build_ft2232_highspeed=yes ], [ @@ -1073,59 +1068,59 @@ use_libusb0=no use_libusb1=no if test $build_usb = yes -o $build_usb_ng = yes; then if test $check_libusb0 = no -a $build_usb_ng = yes; then - AC_CHECK_HEADERS(libusb-1.0/libusb.h, + AC_CHECK_HEADERS([libusb-1.0/libusb.h], [AC_DEFINE(HAVE_LIBUSB1, 1, [Define if you have libusb-1.0]) check_libusb0=no use_libusb1=yes ], [ check_libusb0=yes use_libusb1=no ]) fi if test $check_libusb0 = yes -o $build_usb = yes; then - AC_CHECK_HEADERS(usb.h, [use_libusb0=yes], + AC_CHECK_HEADERS([usb.h], [use_libusb0=yes], [AC_MSG_ERROR([libusb or libusb-1.0 are required to build some OpenOCD driver(s)])]) fi fi -AM_CONDITIONAL(RELEASE, test $build_release = yes) -AM_CONDITIONAL(PARPORT, test $build_parport = yes) -AM_CONDITIONAL(DUMMY, test $build_dummy = yes) -AM_CONDITIONAL(GIVEIO, test x$parport_use_giveio = xyes) -AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes) -AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes) -AM_CONDITIONAL(ZY1000, test $build_zy1000 = yes) -AM_CONDITIONAL(ZY1000_MASTER, test $build_zy1000_master = yes) -AM_CONDITIONAL(IOUTIL, test $build_ioutil = yes) -AM_CONDITIONAL(AT91RM9200, test $build_at91rm9200 = yes) -AM_CONDITIONAL(BITBANG, test $build_bitbang = yes) -AM_CONDITIONAL(FT2232_LIBFTDI, test $build_ft2232_libftdi = yes) -AM_CONDITIONAL(FT2232_DRIVER, test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes) -AM_CONDITIONAL(USB_BLASTER_LIBFTDI, test $build_usb_blaster_libftdi = yes) -AM_CONDITIONAL(USB_BLASTER_DRIVER, test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes) -AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes) -AM_CONDITIONAL(GW16012, test $build_gw16012 = yes) -AM_CONDITIONAL(PRESTO_LIBFTDI, test $build_presto_libftdi = yes) -AM_CONDITIONAL(PRESTO_DRIVER, test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes) -AM_CONDITIONAL(USBPROG, test $build_usbprog = yes) -AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes) -AM_CONDITIONAL(JLINK, test $build_jlink = yes) -AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes) -AM_CONDITIONAL(RLINK, test $build_rlink = yes) -AM_CONDITIONAL(ULINK, test $build_ulink = yes) -AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes) -AM_CONDITIONAL(REMOTE_BITBANG, test $build_remote_bitbang = yes) -AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes) -AM_CONDITIONAL(USB, test $build_usb = yes) -AM_CONDITIONAL(USB_NG, test $build_usb_ng = yes) -AM_CONDITIONAL(USE_LIBUSB0, test $use_libusb0 = yes) -AM_CONDITIONAL(USE_LIBUSB1, test $use_libusb1 = yes) -AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes) -AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes) -AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes) -AM_CONDITIONAL(IS_DARWIN, test $is_darwin = yes) -AM_CONDITIONAL(BITQ, test $build_bitq = yes) +AM_CONDITIONAL([RELEASE], [test $build_release = yes]) +AM_CONDITIONAL([PARPORT], [test $build_parport = yes]) +AM_CONDITIONAL([DUMMY], [test $build_dummy = yes]) +AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes]) +AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes]) +AM_CONDITIONAL([ECOSBOARD], [test $build_ecosboard = yes]) +AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes]) +AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes]) +AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes]) +AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes]) +AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes]) +AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes]) +AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes]) +AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes]) +AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes]) +AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes]) +AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes]) +AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes]) +AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes]) +AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes]) +AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes]) +AM_CONDITIONAL([JLINK], [test $build_jlink = yes]) +AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes]) +AM_CONDITIONAL([RLINK], [test $build_rlink = yes]) +AM_CONDITIONAL([ULINK], [test $build_ulink = yes]) +AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes]) +AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes]) +AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes]) +AM_CONDITIONAL([USB], [test $build_usb = yes]) +AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes]) +AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes]) +AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes]) +AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes]) +AM_CONDITIONAL([IS_MINGW], [test $is_mingw = ye]s) +AM_CONDITIONAL([IS_WIN32], [test $is_win32 = ye]s) +AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = ye]s) +AM_CONDITIONAL([BITQ], [test $build_bitq = yes]) -AM_CONDITIONAL(MINIDRIVER, test $build_minidriver = yes) -AM_CONDITIONAL(MINIDRIVER_DUMMY, test $build_minidriver_dummy = yes) +AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = ye]s) +AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes]) -AM_CONDITIONAL(INTERNAL_JIMTCL, test $use_internal_jimtcl = yes) +AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes]) # Look for environ alternatives. Possibility #1: is environ in unistd.h or stdlib.h? AC_MSG_CHECKING([for environ in unistd.h and stdlib.h]) @@ -1188,8 +1183,8 @@ else fi AC_MSG_RESULT([$CC_FOR_BUILD]) -AC_SUBST(CC_FOR_BUILD) -AC_SUBST(CFLAGS_FOR_BUILD) +AC_SUBST([CC_FOR_BUILD]) +AC_SUBST([CFLAGS_FOR_BUILD]) AC_MSG_CHECKING([for suffix of executable build tools]) if test $cross_compiling = yes; then