interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

tcl: Adapt config files to new ftdi command syntax 

The patch was created automatically using the following
script:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
ftdi_device_desc ftdi device_desc
ftdi_serial ftdi serial
ftdi_channel ftdi channel
ftdi_layout_init ftdi layout_init
ftdi_layout_signal ftdi layout_signal
ftdi_set_signal ftdi set_signal
ftdi_get_signal ftdi get_signal
ftdi_vid_pid ftdi vid_pid
ftdi_tdo_sample_edge ftdi tdo_sample_edge
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6333
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Marc Schink 2021-06-23 20:54:49 +02:00 committed by Antonio Borneo
parent 1d4b252bb1
commit 7c38f24529
96 changed files with 494 additions and 494 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
tcl/board/digilent_analog_discovery.cfg
View File

@ -8,10 +8,10 @@
#
adapter driver ftdi
ftdi_device_desc "Digilent USB Device"
ftdi_vid_pid 0x0403 0x6014
ftdi device_desc "Digilent USB Device"
ftdi vid_pid 0x0403 0x6014
ftdi_layout_init 0x8008 0x800b
ftdi layout_init 0x8008 0x800b
adapter speed 25000

10
tcl/board/digilent_nexys_video.cfg
View File

@ -6,19 +6,19 @@
adapter driver ftdi
adapter speed 30000
ftdi_device_desc "Digilent USB Device"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Digilent USB Device"
ftdi vid_pid 0x0403 0x6010
# channel 0 is dedicated for Digilent's DPTI Interface
# channel 1 is used for JTAG
ftdi_channel 1
ftdi channel 1
# just TCK TDI TDO TMS, no reset
ftdi_layout_init 0x0088 0x008b
ftdi layout_init 0x0088 0x008b
reset_config none
# Enable sampling on falling edge for high JTAG speeds.
ftdi_tdo_sample_edge falling
ftdi tdo_sample_edge falling
transport select jtag

2
tcl/board/dp_busblaster_v3.cfg
View File

@ -8,6 +8,6 @@
#
source [find interface/ftdi/dp_busblaster.cfg]
ftdi_channel 1
ftdi channel 1
jtag newtap xc2c32a tap -expected-id 0x06e1c093 -irlen 8

2
tcl/board/dp_busblaster_v4.cfg
View File

@ -14,6 +14,6 @@
#
source [find interface/ftdi/dp_busblaster.cfg]
ftdi_channel 1
ftdi channel 1
jtag newtap xc2c64a tap -expected-id 0x06e5c093 -irlen 8

6
tcl/board/gumstix-aerocore.cfg
View File

@ -1,10 +1,10 @@
# JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on
# the first interface of a Quad FTDI chip. nTRST is bit 4.
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi vid_pid 0x0403 0x6011
ftdi_layout_init 0x0000 0x001b
ftdi_layout_signal nTRST -data 0x0010
ftdi layout_init 0x0000 0x001b
ftdi layout_signal nTRST -data 0x0010
source [find target/stm32f4x.cfg]
reset_config trst_only

8
tcl/board/kasli.cfg
View File

@ -1,8 +1,8 @@
adapter driver ftdi
ftdi_device_desc "Quad RS232-HS"
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
ftdi device_desc "Quad RS232-HS"
ftdi vid_pid 0x0403 0x6011
ftdi channel 0
ftdi layout_init 0x0008 0x000b
# adapter usb location 1:8
reset_config none

2
tcl/board/kindle2.cfg
View File

@ -37,7 +37,7 @@ jtag_ntrst_delay 30
arm11 memwrite burst disable
adapter speed 1000
ftdi_tdo_sample_edge falling
ftdi tdo_sample_edge falling
proc kindle2_init {} {
imx3x_reset

10
tcl/board/nds32_corvettef1.cfg
View File

@ -7,12 +7,12 @@
adapter speed 10000
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
reset_config srst_only
source [find target/nds32v5.cfg]

10
tcl/board/numato_mimas_a7.cfg
View File

@ -8,13 +8,13 @@
# Therefore, prefer external power supply.
adapter driver ftdi
ftdi_device_desc "Mimas Artix 7 FPGA Module"
ftdi_vid_pid 0x2a19 0x1009
ftdi device_desc "Mimas Artix 7 FPGA Module"
ftdi vid_pid 0x2a19 0x1009
# channel 0 is for custom purpose by users (like uart, fifo etc)
# channel 1 is reserved for JTAG (by-default) or SPI (possible via changing solder jumpers)
ftdi_channel 1
ftdi_tdo_sample_edge falling
ftdi channel 1
ftdi tdo_sample_edge falling
# FTDI Pin Layout
@ -28,7 +28,7 @@ ftdi_tdo_sample_edge falling
# OE_N is JTAG buffer output enable signal (active-low)
# PROG_B is not used, so left as input to FTDI.
#
ftdi_layout_init 0x0008 0x004b
ftdi layout_init 0x0008 0x004b
reset_config none
adapter speed 30000

8
tcl/board/quark_d2000_refboard.cfg
View File

@ -2,11 +2,11 @@
# the board has an onboard FTDI FT232H chip
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6014
ftdi_channel 0
ftdi vid_pid 0x0403 0x6014
ftdi channel 0
ftdi_layout_init 0x0000 0x030b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0100
ftdi layout_init 0x0000 0x030b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0100
source [find target/quark_d20xx.cfg]

14
tcl/board/sayma_amc.cfg
View File

@ -11,19 +11,19 @@
# which features an Artix 7 FPGA.
adapter driver ftdi
ftdi_device_desc "Quad RS232-HS"
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi device_desc "Quad RS232-HS"
ftdi vid_pid 0x0403 0x6011
ftdi channel 0
# Use this to distinguish multiple boards by topology
#adapter usb location 5:1
# sampling on falling edge generally seems to work and accelerates things but
# is not fully tested
#ftdi_tdo_sample_edge falling
#ftdi tdo_sample_edge falling
# EN_USB_JTAG on ADBUS7: out, high
# USB_nTRST on ADBUS4: out, high, but R46 is DNP
ftdi_layout_init 0x0098 0x008b
#ftdi_layout_signal EN_USB -data 0x0080
#ftdi_layout_signal nTRST -data 0x0010
ftdi layout_init 0x0098 0x008b
#ftdi layout_signal EN_USB -data 0x0080
#ftdi layout_signal nTRST -data 0x0010
reset_config none
adapter speed 5000

4
tcl/board/sifive-e31arty.cfg
View File

@ -14,8 +14,8 @@ $_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-
flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
init
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
ftdi set_signal nSRST 0
ftdi set_signal nSRST z
}
halt
flash protect 0 64 last off

4
tcl/board/sifive-e51arty.cfg
View File

@ -14,8 +14,8 @@ $_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-
flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
init
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
ftdi set_signal nSRST 0
ftdi set_signal nSRST z
}
halt
flash protect 0 64 last off

14
tcl/board/sifive-hifive1.cfg
View File

@ -1,15 +1,15 @@
adapter speed 10000
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x001b
ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
ftdi layout_init 0x0008 0x001b
ftdi layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
# ftdi_set_signal, but still good to document
# ftdi set_signal, but still good to document
#adapter srst delay 1500
set _CHIPNAME riscv
@ -23,8 +23,8 @@ flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
init
#reset -- This type of reset is not implemented yet
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
ftdi set_signal nSRST 0
ftdi set_signal nSRST z
#Wait for the reset stretcher
#It will work without this, but
#will incur lots of delays for later commands.

2
tcl/board/ti_tmdx570ls20susb.cfg
View File

@ -12,5 +12,5 @@ reset_config trst_only
# xds100v2 config says add this to the end
init
ftdi_set_signal PWR_RST 1
ftdi set_signal PWR_RST 1
jtag arp_init

10
tcl/interface/ftdi/100ask-openjtag.cfg
View File

@ -8,9 +8,9 @@
#
adapter driver ftdi
ftdi_device_desc "USB<=>JTAG&RS232"
ftdi_vid_pid 0x1457 0x5118
ftdi device_desc "USB<=>JTAG&RS232"
ftdi vid_pid 0x1457 0x5118
ftdi_layout_init 0x0f08 0x0f1b
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_init 0x0f08 0x0f1b
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400

10
tcl/interface/ftdi/axm0432.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Symphony SoundBite"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Symphony SoundBite"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400
ftdi layout_init 0x0c08 0x0c2b
ftdi layout_signal nTRST -data 0x0800
ftdi layout_signal nSRST -data 0x0400

18
tcl/interface/ftdi/c232hm.cfg
View File

@ -14,18 +14,18 @@
# http://www.ftdichip.com/Support/Documents/AppNotes/AN_129_FTDI_Hi_Speed_USB_To_JTAG_Example.pdf
adapter driver ftdi
#ftdi_device_desc "C232HM-DDHSL-0"
#ftdi_device_desc "C232HM-EDHSL-0"
#ftdi device_desc "C232HM-DDHSL-0"
#ftdi device_desc "C232HM-EDHSL-0"
# Common PID for FT232H
ftdi_vid_pid 0x0403 0x6014
ftdi vid_pid 0x0403 0x6014
# Layout
# High data byte 0x40 configures red LED on ACBUS6 initially high (unlit, since active-low)
# Low data byte 0x08 configures TMS on ACBUS3 initially high (asserted); TCK, TDI low
# High direction byte 0x40 configures red LED on ACBUS6 as high (output)
# Low direction byte 0x0b configures TDO on ACBUS2 as low (input)
ftdi_layout_init 0x4008 0x400b
ftdi layout_init 0x4008 0x400b
# ---A*BUS-------CCCCCCCC|DDDDDDDD
# --------\______76543210|76543210
@ -35,12 +35,12 @@ ftdi_layout_init 0x4008 0x400b
#GPIOL2 0x0040 = 00000000|01000000 = ADBUS6
#GPIOL3 0x0080 = 00000000|10000000 = ADBUS7
# -ndata treats the LED as active-low for expected behavior (toggle when transferring)
ftdi_layout_signal LED -ndata 0x4000
ftdi layout_signal LED -ndata 0x4000
# Available for aliasing as desired
ftdi_layout_signal GPIOL0 -data 0x0010 -oe 0x0010
ftdi_layout_signal GPIOL1 -data 0x0020 -oe 0x0020
ftdi_layout_signal GPIOL2 -data 0x0040 -oe 0x0040
ftdi_layout_signal GPIOL3 -data 0x0080 -oe 0x0080
ftdi layout_signal GPIOL0 -data 0x0010 -oe 0x0010
ftdi layout_signal GPIOL1 -data 0x0020 -oe 0x0020
ftdi layout_signal GPIOL2 -data 0x0040 -oe 0x0040
ftdi layout_signal GPIOL3 -data 0x0080 -oe 0x0080
# C232HM FT232H JTAG/Other
# Num Color Name Func

10
tcl/interface/ftdi/calao-usb-a9260-c01.cfg
View File

@ -11,12 +11,12 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma
echo "as working or fixed."
adapter driver ftdi
ftdi_device_desc "USB-A9260"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "USB-A9260"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg

10
tcl/interface/ftdi/calao-usb-a9260-c02.cfg
View File

@ -11,12 +11,12 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma
echo "as working or fixed."
adapter driver ftdi
ftdi_device_desc "USB-A9260"
ftdi_vid_pid 0x0403 0x6001
ftdi device_desc "USB-A9260"
ftdi vid_pid 0x0403 0x6001
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg

10
tcl/interface/ftdi/cortino.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Cortino"
ftdi_vid_pid 0x0640 0x0032
ftdi device_desc "Cortino"
ftdi vid_pid 0x0640 0x0032
ftdi_layout_init 0x0108 0x010b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200
ftdi layout_init 0x0108 0x010b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200 -oe 0x0200

8
tcl/interface/ftdi/digilent-hs1.cfg
View File

@ -2,10 +2,10 @@
# (the later being the OEM on-board version)
adapter driver ftdi
ftdi_device_desc "Digilent Adept USB Device"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Digilent Adept USB Device"
ftdi vid_pid 0x0403 0x6010
# channel 1 does not have any functionality
ftdi_channel 0
ftdi channel 0
# just TCK TDI TDO TMS, no reset
ftdi_layout_init 0x0088 0x008b
ftdi layout_init 0x0088 0x008b
reset_config none

8
tcl/interface/ftdi/digilent-hs2.cfg
View File

@ -1,10 +1,10 @@
# this supports JTAG-HS2 (and apparently Nexys4 as well)
adapter driver ftdi
ftdi_device_desc "Digilent Adept USB Device"
ftdi_vid_pid 0x0403 0x6014
ftdi device_desc "Digilent Adept USB Device"
ftdi vid_pid 0x0403 0x6014
ftdi_channel 0
ftdi_layout_init 0x00e8 0x60eb
ftdi channel 0
ftdi layout_init 0x00e8 0x60eb
reset_config none

8
tcl/interface/ftdi/digilent_jtag_hs3.cfg
View File

@ -3,11 +3,11 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6014
ftdi_device_desc "Digilent USB Device"
ftdi vid_pid 0x0403 0x6014
ftdi device_desc "Digilent USB Device"
# From Digilent support:
# The SRST pin is [...] 0x20 and 0x10 is the /OE (active low output enable)
ftdi_layout_init 0x2088 0x308b
ftdi_layout_signal nSRST -data 0x2000 -noe 0x1000
ftdi layout_init 0x2088 0x308b
ftdi layout_signal nSRST -data 0x2000 -noe 0x1000

12
tcl/interface/ftdi/digilent_jtag_smt2.cfg
View File

@ -8,10 +8,10 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6014
ftdi vid_pid 0x0403 0x6014
ftdi_layout_init 0x20e8 0x3feb
ftdi_layout_signal nSRST -data 0x2000
ftdi_layout_signal GPIO2 -data 0x2000
ftdi_layout_signal GPIO1 -data 0x0200
ftdi_layout_signal GPIO0 -data 0x0100
ftdi layout_init 0x20e8 0x3feb
ftdi layout_signal nSRST -data 0x2000
ftdi layout_signal GPIO2 -data 0x2000
ftdi layout_signal GPIO1 -data 0x0200
ftdi layout_signal GPIO0 -data 0x0100

10
tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg
View File

@ -8,11 +8,11 @@
# https://www.xilinx.com/products/boards-and-kits/kcu105.html#documentation
#
# Note that the digilent_jtag_smt2 layout does not work and hangs while
# the ftdi_device_desc from digilent_hs2 is wrong.
# the ftdi device_desc from digilent_hs2 is wrong.
adapter driver ftdi
ftdi_device_desc "Digilent USB Device"
ftdi_vid_pid 0x0403 0x6014
ftdi_channel 0
ftdi_layout_init 0x00e8 0x60eb
ftdi device_desc "Digilent USB Device"
ftdi vid_pid 0x0403 0x6014
ftdi channel 0
ftdi layout_init 0x00e8 0x60eb
reset_config none

10
tcl/interface/ftdi/dlp-usb1232h.cfg
View File

@ -13,9 +13,9 @@ echo "in ft2232.c. Please report your experience with this file to openocd-devel
echo "mailing list, so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0040 -oe 0x0040

10
tcl/interface/ftdi/dp_busblaster.cfg
View File

@ -12,9 +12,9 @@ echo "Info : If you need SWD support, flash KT-Link buffer from https://github.c
and use dp_busblaster_kt-link.cfg instead"
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800

16
tcl/interface/ftdi/dp_busblaster_kt-link.cfg
View File

@ -10,12 +10,12 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x8c28 0xff3b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal LED -ndata 0x8000
ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi_layout_signal SWDIO_OE -ndata 0x1000
ftdi layout_init 0x8c28 0xff3b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_signal LED -ndata 0x8000
ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi layout_signal SWDIO_OE -ndata 0x1000

10
tcl/interface/ftdi/flossjtag-noeeprom.cfg
View File

@ -18,9 +18,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0040 -oe 0x0040

16
tcl/interface/ftdi/flossjtag.cfg
View File

@ -18,12 +18,12 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_device_desc "FLOSS-JTAG"
#ftdi_serial "FJ000001"
ftdi vid_pid 0x0403 0x6010
ftdi device_desc "FLOSS-JTAG"
#ftdi serial "FJ000001"
ftdi_layout_init 0x0008 0x180b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi_layout_signal LED -data 0x0800
ftdi_layout_signal LED2 -data 0x1000
ftdi layout_init 0x0008 0x180b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi layout_signal LED -data 0x0800
ftdi layout_signal LED2 -data 0x1000

12
tcl/interface/ftdi/flyswatter.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Flyswatter"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Flyswatter"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0818 0x0cfb
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -oe 0x0020
ftdi_layout_signal LED -data 0x0c00
ftdi layout_init 0x0818 0x0cfb
ftdi layout_signal nTRST -data 0x0010
ftdi layout_signal nSRST -oe 0x0020
ftdi layout_signal LED -data 0x0c00

12
tcl/interface/ftdi/flyswatter2.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Flyswatter2"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Flyswatter2"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0538 0x057b
ftdi_layout_signal LED -ndata 0x0400
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -data 0x0020 -noe 0x0100
ftdi layout_init 0x0538 0x057b
ftdi layout_signal LED -ndata 0x0400
ftdi layout_signal nTRST -data 0x0010
ftdi layout_signal nSRST -data 0x0020 -noe 0x0100

16
tcl/interface/ftdi/ft232h-module-swd.cfg
View File

@ -8,27 +8,27 @@
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6014
ftdi vid_pid 0x0403 0x6014
# data MSB..LSB direction (1:out) MSB..LSB
# 0000'0000'0011'0000 0000'0000'0011'1011
ftdi_layout_init 0x0030 0x003b
ftdi layout_init 0x0030 0x003b
# 0xfff8 0xfffb
# Those signal are only required on some platforms or may required to be
# enabled explicitly (e.g. nrf5x chips).
ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nTRST -data 0x0020 -oe 0x0020
ftdi layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi layout_signal nTRST -data 0x0020 -oe 0x0020
# swd enable
ftdi_layout_signal SWD_EN -data 0
ftdi layout_signal SWD_EN -data 0
# tri-state (configure as input) TDO/TIO when reading
ftdi_layout_signal SWDIO_OE -data 0
ftdi layout_signal SWDIO_OE -data 0
transport select swd
# re-configure TDO as tri-state
#ftdi_layout_signal TDO -data 0x0002 -oe 0x0002
#ftdi_layout_signal TDI -data 0x0004
#ftdi layout_signal TDO -data 0x0002 -oe 0x0002
#ftdi layout_signal TDI -data 0x0004
# Adafruit FT232H JTAG SWD
# Name Pin Name Func Func

10
tcl/interface/ftdi/gw16042.cfg
View File

@ -18,9 +18,9 @@
#
adapter driver ftdi
ftdi_device_desc "USB-JTAG"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "USB-JTAG"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0058 0x007b
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -oe 0x0020
ftdi layout_init 0x0058 0x007b
ftdi layout_signal nTRST -data 0x0010
ftdi layout_signal nSRST -oe 0x0020

14
tcl/interface/ftdi/hie-jtag.cfg
View File

@ -6,15 +6,15 @@
#
adapter driver ftdi
ftdi_channel 0
ftdi_vid_pid 0x0403 0x6014
ftdi_device_desc "HIE JTAG Debugger"
ftdi channel 0
ftdi vid_pid 0x0403 0x6014
ftdi device_desc "HIE JTAG Debugger"
ftdi_layout_init 0x0c08 0x4f1b
ftdi layout_init 0x0c08 0x4f1b
# define both Reset signals
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
# Toggle USB LED
ftdi_layout_signal LED -ndata 0x4000
ftdi layout_signal LED -ndata 0x4000

10
tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "NXHX 10-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi device_desc "NXHX 10-ETM"
ftdi vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200
ftdi layout_init 0x0308 0x030b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200

10
tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "NXHX 500-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi device_desc "NXHX 500-ETM"
ftdi vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200
ftdi layout_init 0x0308 0x030b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200

10
tcl/interface/ftdi/hilscher_nxhx500_re.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "NXHX 500-RE"
ftdi_vid_pid 0x0640 0x0028
ftdi device_desc "NXHX 500-RE"
ftdi vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200
ftdi layout_init 0x0308 0x030b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200

10
tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "NXHX 50-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi device_desc "NXHX 50-ETM"
ftdi vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200
ftdi layout_init 0x0308 0x030b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200

10
tcl/interface/ftdi/hilscher_nxhx50_re.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "NXHX50-RE"
ftdi_vid_pid 0x0640 0x0028
ftdi device_desc "NXHX50-RE"
ftdi vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200
ftdi layout_init 0x0308 0x030b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200

10
tcl/interface/ftdi/hitex_lpc1768stick.cfg
View File

@ -6,9 +6,9 @@
adapter driver ftdi
ftdi_device_desc "LPC1768-Stick"
ftdi_vid_pid 0x0640 0x0026
ftdi device_desc "LPC1768-Stick"
ftdi vid_pid 0x0640 0x0026
ftdi_layout_init 0x0388 0x038b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0080 -noe 0x200
ftdi layout_init 0x0388 0x038b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0080 -noe 0x200

10
tcl/interface/ftdi/hitex_str9-comstick.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "STR9-comStick"
ftdi_vid_pid 0x0640 0x002c
ftdi device_desc "STR9-comStick"
ftdi vid_pid 0x0640 0x002c
ftdi_layout_init 0x0108 0x010b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200
ftdi layout_init 0x0108 0x010b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0200 -oe 0x0200

10
tcl/interface/ftdi/icebear.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "ICEbear JTAG adapter"
ftdi_vid_pid 0x0403 0xc140
ftdi device_desc "ICEbear JTAG adapter"
ftdi vid_pid 0x0403 0xc140
ftdi_layout_init 0x0028 0x002b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020
ftdi layout_init 0x0028 0x002b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0020

22
tcl/interface/ftdi/imx8mp-evk.cfg
View File

@ -11,18 +11,18 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi vid_pid 0x0403 0x6011
ftdi channel 0
ftdi_layout_init 0x00f8 0x000b
ftdi layout_init 0x00f8 0x000b
ftdi_layout_signal RESET_B -data 0x0010 -oe 0x0010
ftdi layout_signal RESET_B -data 0x0010 -oe 0x0010
# Called SYS_nRST in schematics
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi_layout_signal IO_nRST -data 0x0040 -oe 0x0040
ftdi_layout_signal ONOFF_B -data 0x0080 -oe 0x0080
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_signal IO_nRST -data 0x0040 -oe 0x0040
ftdi layout_signal ONOFF_B -data 0x0080 -oe 0x0080
ftdi_layout_signal GPIO1 -data 0x0100 -oe 0x0100
ftdi_layout_signal GPIO2 -data 0x0200 -oe 0x0200
ftdi_layout_signal GPIO3 -data 0x0400 -oe 0x0400
ftdi_layout_signal GPIO4 -data 0x0800 -oe 0x0800
ftdi layout_signal GPIO1 -data 0x0100 -oe 0x0100
ftdi layout_signal GPIO2 -data 0x0200 -oe 0x0200
ftdi layout_signal GPIO3 -data 0x0400 -oe 0x0400
ftdi layout_signal GPIO4 -data 0x0800 -oe 0x0800

8
tcl/interface/ftdi/incircuit-icprog.cfg
View File

@ -7,8 +7,8 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nSRST -noe 0x0400 -data 0x0800
ftdi_layout_signal nTRST -noe 0x0100 -data 0x0200
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nSRST -noe 0x0400 -data 0x0800
ftdi layout_signal nTRST -noe 0x0100 -data 0x0200

8
tcl/interface/ftdi/iotlab-usb.cfg
View File

@ -4,8 +4,8 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0040 -oe 0x0040

20
tcl/interface/ftdi/isodebug.cfg
View File

@ -2,26 +2,26 @@
# 5 kV isolated JTAG/SWD + UART adapter by Unjo AB
adapter driver ftdi
ftdi_vid_pid 0x22b7 0x150d
ftdi vid_pid 0x22b7 0x150d
ftdi_layout_init 0x0ff8 0xfffb
ftdi layout_init 0x0ff8 0xfffb
ftdi_layout_signal LED -ndata 0x0100
ftdi_layout_signal nTRST -data 0x0200
ftdi_layout_signal nSRST -noe 0x0400
ftdi_layout_signal SWDIO_OE -data 0x0008
ftdi layout_signal LED -ndata 0x0100
ftdi layout_signal nTRST -data 0x0200
ftdi layout_signal nSRST -noe 0x0400
ftdi layout_signal SWDIO_OE -data 0x0008
# Mode signals, either of these needs to be high to drive the JTAG/SWD pins.
# The power-on state is low for both signals but the init setting above sets
# JTAG_EN high.
ftdi_layout_signal SWD_EN -data 0x1000
ftdi_layout_signal JTAG_EN -data 0x0800
ftdi layout_signal SWD_EN -data 0x1000
ftdi layout_signal JTAG_EN -data 0x0800
# In SWD mode, the JTAG_EN signal doubles as SWO_EN_N which switches the
# second FTDI channel UART RxD to the SWO pin instead of the separate RxD
# pin. Note that the default init state has this pin high so when OpenOCD
# starts in SWD mode, SWO is by default disabled. To enable SWO tracing,
# issue the command 'ftdi_set_signal SWO_EN 1' where tracing is configured.
# issue the command 'ftdi set_signal SWO_EN 1' where tracing is configured.
# To switch back to using the separate UART, SWO_EN needs to be disabled
# before exiting OpenOCD, or the adapter replugged.
ftdi_layout_signal SWO_EN -nalias JTAG_EN
ftdi layout_signal SWO_EN -nalias JTAG_EN

16
tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg
View File

@ -5,12 +5,12 @@
#
adapter driver ftdi
ftdi_device_desc "JTAG-lock-pick Tiny 2"
ftdi_vid_pid 0x0403 0x8220
ftdi device_desc "JTAG-lock-pick Tiny 2"
ftdi vid_pid 0x0403 0x8220
ftdi_layout_init 0x8c28 0xff3b
ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal SWDIO_OE -ndata 0x1000
ftdi_layout_signal LED -ndata 0x8000
ftdi layout_init 0x8c28 0xff3b
ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_signal SWDIO_OE -ndata 0x1000
ftdi layout_signal LED -ndata 0x8000

10
tcl/interface/ftdi/jtagkey.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Amontec JTAGkey"
ftdi_vid_pid 0x0403 0xcff8
ftdi device_desc "Amontec JTAGkey"
ftdi vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800

10
tcl/interface/ftdi/jtagkey2.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Amontec JTAGkey-2"
ftdi_vid_pid 0x0403 0xcff8
ftdi device_desc "Amontec JTAGkey-2"
ftdi vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800

10
tcl/interface/ftdi/jtagkey2p.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Amontec JTAGkey-2P"
ftdi_vid_pid 0x0403 0xcff8
ftdi device_desc "Amontec JTAGkey-2P"
ftdi vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800

16
tcl/interface/ftdi/kt-link.cfg
View File

@ -5,12 +5,12 @@
#
adapter driver ftdi
ftdi_device_desc "KT-LINK"
ftdi_vid_pid 0x0403 0xbbe2
ftdi device_desc "KT-LINK"
ftdi vid_pid 0x0403 0xbbe2
ftdi_layout_init 0x8c28 0xff3b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal LED -data 0x8000
ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi_layout_signal SWDIO_OE -ndata 0x1000
ftdi layout_init 0x8c28 0xff3b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_signal LED -data 0x8000
ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000
ftdi layout_signal SWDIO_OE -ndata 0x1000

14
tcl/interface/ftdi/lisa-l.cfg
View File

@ -10,11 +10,11 @@ echo "in ft2232.c. Please report your experience with this file to openocd-devel
echo "mailing list, so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Lisa/L"
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi device_desc "Lisa/L"
ftdi vid_pid 0x0403 0x6010
ftdi channel 1
ftdi_layout_init 0x0008 0x180b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi_layout_signal LED -data 0x1800
ftdi layout_init 0x0008 0x180b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi layout_signal LED -data 0x1800

12
tcl/interface/ftdi/luminary-icdi.cfg
View File

@ -16,10 +16,10 @@
#
adapter driver ftdi
ftdi_device_desc "Luminary Micro ICDI Board"
ftdi_vid_pid 0x0403 0xbcda
ftdi device_desc "Luminary Micro ICDI Board"
ftdi vid_pid 0x0403 0xbcda
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020
ftdi_layout_signal SWD_EN -ndata 0x0080
ftdi_layout_signal SWDIO_OE -data 0x0008
ftdi layout_init 0x00a8 0x00eb
ftdi layout_signal nSRST -noe 0x0020
ftdi layout_signal SWD_EN -ndata 0x0080
ftdi layout_signal SWDIO_OE -data 0x0008

12
tcl/interface/ftdi/luminary-lm3s811.cfg
View File

@ -12,10 +12,10 @@
#
adapter driver ftdi
ftdi_device_desc "LM3S811 Evaluation Board"
ftdi_vid_pid 0x0403 0xbcd9
ftdi device_desc "LM3S811 Evaluation Board"
ftdi vid_pid 0x0403 0xbcd9
ftdi_layout_init 0x0088 0x008b
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi_layout_signal SWD_EN -ndata 0x0080
ftdi_layout_signal SWDIO_OE -data 0x0008
ftdi layout_init 0x0088 0x008b
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_signal SWD_EN -ndata 0x0080
ftdi layout_signal SWDIO_OE -data 0x0008

12
tcl/interface/ftdi/luminary.cfg
View File

@ -25,10 +25,10 @@
#
adapter driver ftdi
ftdi_device_desc "Stellaris Evaluation Board"
ftdi_vid_pid 0x0403 0xbcd9
ftdi device_desc "Stellaris Evaluation Board"
ftdi vid_pid 0x0403 0xbcd9
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020
ftdi_layout_signal SWD_EN -ndata 0x0080
ftdi_layout_signal SWDIO_OE -data 0x0008
ftdi layout_init 0x00a8 0x00eb
ftdi layout_signal nSRST -noe 0x0020
ftdi layout_signal SWD_EN -ndata 0x0080
ftdi layout_signal SWDIO_OE -data 0x0008

12
tcl/interface/ftdi/m53evk.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi channel 0
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020

6
tcl/interface/ftdi/mbftdi.cfg
View File

@ -10,7 +10,7 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi layout_init 0x0008 0x000b

20
tcl/interface/ftdi/minimodule-swd.cfg
View File

@ -38,17 +38,17 @@ adapter driver ftdi
#Select your module type and channel
#ftdi_device_desc "FT2232H MiniModule"
ftdi_vid_pid 0x0403 0x6010
#ftdi_channel 1
#ftdi device_desc "FT2232H MiniModule"
ftdi vid_pid 0x0403 0x6010
#ftdi channel 1
#ftdi_device_desc "FT4232H MiniModule"
#ftdi_vid_pid 0x0403 0x6011
#ftdi_channel 1
#ftdi device_desc "FT4232H MiniModule"
#ftdi vid_pid 0x0403 0x6011
#ftdi channel 1
ftdi_layout_init 0x0000 0x000b
ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi_layout_signal SWD_EN -data 0
ftdi_layout_signal SWDIO_OE -data 0
ftdi layout_init 0x0000 0x000b
ftdi layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi layout_signal SWD_EN -data 0
ftdi layout_signal SWDIO_OE -data 0
transport select swd

8
tcl/interface/ftdi/minimodule.cfg
View File

@ -5,12 +5,12 @@
#
adapter driver ftdi
ftdi_device_desc "FT2232H MiniModule"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "FT2232H MiniModule"
ftdi vid_pid 0x0403 0x6010
# Every pin set as high impedance except TCK, TDI, TDO and TMS
ftdi_layout_init 0x0008 0x000b
ftdi layout_init 0x0008 0x000b
# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
# This choice is arbitrary. Use other GPIO pin if desired.
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020

8
tcl/interface/ftdi/minispartan6.cfg
View File

@ -3,12 +3,12 @@
adapter driver ftdi
# The miniSpartan6+ sadly doesn't have a custom device description, so we just
# have to hope you got it right.
#ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
#ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
# interface 1 is the uart
ftdi_channel 0
ftdi channel 0
# just TCK TDI TDO TMS, no reset
ftdi_layout_init 0x0008 0x000b
ftdi layout_init 0x0008 0x000b
reset_config none
# this generally works fast: the fpga can handle 30MHz, the spi flash can handle
# 54MHz with simple read, no dummy cycles, and wait-for-write-completion

12
tcl/interface/ftdi/miniwiggler.cfg
View File

@ -25,10 +25,10 @@
#
adapter driver ftdi
ftdi_device_desc "DAS JDS miniWiggler V3.1"
ftdi_vid_pid 0x058b 0x0043
ftdi device_desc "DAS JDS miniWiggler V3.1"
ftdi vid_pid 0x058b 0x0043
ftdi_channel 0
ftdi_layout_init 0x0008 0x001b
ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200
ftdi channel 0
ftdi layout_init 0x0008 0x001b
ftdi layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi layout_signal nSRST -data 0x0200 -oe 0x0200

12
tcl/interface/ftdi/neodb.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Debug Board for Neo1973"
ftdi_vid_pid 0x1457 0x5118
ftdi device_desc "Debug Board for Neo1973"
ftdi vid_pid 0x1457 0x5118
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi_layout_signal nNOR_WP -data 0x0010 -oe 0x0010
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_signal nNOR_WP -data 0x0010 -oe 0x0010

10
tcl/interface/ftdi/ngxtech.cfg
View File

@ -11,9 +11,9 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma
echo "as working or fixed."
adapter driver ftdi
ftdi_device_desc "NGX JTAG"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "NGX JTAG"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

4
tcl/interface/ftdi/olimex-arm-jtag-swd.cfg
View File

@ -5,5 +5,5 @@
transport select swd
ftdi_layout_signal SWD_EN -nalias nTRST
ftdi_layout_signal SWDIO_OE -alias TMS
ftdi layout_signal SWD_EN -nalias nTRST
ftdi layout_signal SWDIO_OE -alias TMS

12
tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H"
ftdi_vid_pid 0x15ba 0x002b
ftdi device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H"
ftdi vid_pid 0x15ba 0x002b
ftdi_layout_init 0x0908 0x0b1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal LED -data 0x0800
ftdi layout_init 0x0908 0x0b1b
ftdi layout_signal nSRST -oe 0x0200
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal LED -data 0x0800

12
tcl/interface/ftdi/olimex-arm-usb-ocd.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Olimex OpenOCD JTAG"
ftdi_vid_pid 0x15ba 0x0003
ftdi device_desc "Olimex OpenOCD JTAG"
ftdi vid_pid 0x15ba 0x0003
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal LED -data 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nSRST -oe 0x0200
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal LED -data 0x0800

12
tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi_vid_pid 0x15ba 0x002a
ftdi device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi vid_pid 0x15ba 0x002a
ftdi_layout_init 0x0808 0x0a1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal LED -data 0x0800
ftdi layout_init 0x0808 0x0a1b
ftdi layout_signal nSRST -oe 0x0200
ftdi layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi layout_signal LED -data 0x0800

12
tcl/interface/ftdi/olimex-jtag-tiny.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Olimex OpenOCD JTAG TINY"
ftdi_vid_pid 0x15ba 0x0004
ftdi device_desc "Olimex OpenOCD JTAG TINY"
ftdi vid_pid 0x15ba 0x0004
ftdi_layout_init 0x0808 0x0a1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal LED -data 0x0800
ftdi layout_init 0x0808 0x0a1b
ftdi layout_signal nSRST -oe 0x0200
ftdi layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi layout_signal LED -data 0x0800

10
tcl/interface/ftdi/oocdlink.cfg
View File

@ -11,9 +11,9 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma
echo "as working or fixed."
adapter driver ftdi
ftdi_device_desc "OOCDLink"
ftdi_vid_pid 0x0403 0xbaf8
ftdi device_desc "OOCDLink"
ftdi vid_pid 0x0403 0xbaf8
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

12
tcl/interface/ftdi/opendous_ftdi.cfg
View File

@ -8,10 +8,10 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi channel 1
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi layout_init 0x0c08 0x0f1b
ftdi layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi layout_signal nSRST -data 0x0200 -noe 0x0800

10
tcl/interface/ftdi/openocd-usb-hs.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232-HS"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

10
tcl/interface/ftdi/openocd-usb.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "Dual RS232"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Dual RS232"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

12
tcl/interface/ftdi/openrd.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "OpenRD JTAGKey FT2232D B"
ftdi_vid_pid 0x0403 0x9e90
ftdi_channel 0
ftdi device_desc "OpenRD JTAGKey FT2232D B"
ftdi vid_pid 0x0403 0x9e90
ftdi channel 0
ftdi_layout_init 0x0608 0x0f1b
ftdi_layout_signal nTRST -data 0x0200
ftdi_layout_signal nSRST -noe 0x0400
ftdi layout_init 0x0608 0x0f1b
ftdi layout_signal nTRST -data 0x0200
ftdi layout_signal nSRST -noe 0x0400

8
tcl/interface/ftdi/pipistrello.cfg
View File

@ -1,12 +1,12 @@
# http://pipistrello.saanlima.com/
# http://www.saanlima.com/download/pipistrello-v2.0/pipistrello_v2_schematic.pdf
adapter driver ftdi
ftdi_device_desc "Pipistrello LX45"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "Pipistrello LX45"
ftdi vid_pid 0x0403 0x6010
# interface 1 is the uart
ftdi_channel 0
ftdi channel 0
# just TCK TDI TDO TMS, no reset
ftdi_layout_init 0x0008 0x000b
ftdi layout_init 0x0008 0x000b
reset_config none
# this generally works fast: the fpga can handle 30MHz, the spi flash can handle
# 54MHz with simple read, no dummy cycles, and wait-for-write-completion

12
tcl/interface/ftdi/pls_spc5.cfg
View File

@ -27,10 +27,10 @@
#
adapter driver ftdi
ftdi_device_desc "PLS USB/JTAG Adapter for SPC5xxx"
ftdi_vid_pid 0x263d 0x4001
ftdi device_desc "PLS USB/JTAG Adapter for SPC5xxx"
ftdi vid_pid 0x263d 0x4001
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal nSRST -ndata 0x2000 -oe 0x2000
ftdi channel 0
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi layout_signal nSRST -ndata 0x2000 -oe 0x2000

8
tcl/interface/ftdi/redbee-econotag.cfg
View File

@ -14,8 +14,8 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400
ftdi layout_init 0x0c08 0x0c2b
ftdi layout_signal nTRST -data 0x0800
ftdi layout_signal nSRST -data 0x0400

10
tcl/interface/ftdi/redbee-usb.cfg
View File

@ -14,9 +14,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi vid_pid 0x0403 0x6010
ftdi channel 1
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400
ftdi layout_init 0x0c08 0x0c2b
ftdi layout_signal nTRST -data 0x0800
ftdi layout_signal nSRST -data 0x0400

4
tcl/interface/ftdi/rowley-cc-arm-swd.cfg
View File

@ -6,5 +6,5 @@
transport select swd
ftdi_layout_signal SWD_EN -nalias nTRST
ftdi_layout_signal SWDIO_OE -alias TMS
ftdi layout_signal SWD_EN -nalias nTRST
ftdi layout_signal SWDIO_OE -alias TMS

12
tcl/interface/ftdi/sheevaplug.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "SheevaPlug JTAGKey FT2232D B"
ftdi_vid_pid 0x9e88 0x9e8f
ftdi_channel 0
ftdi device_desc "SheevaPlug JTAGKey FT2232D B"
ftdi vid_pid 0x9e88 0x9e8f
ftdi channel 0
ftdi_layout_init 0x0608 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0608 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

10
tcl/interface/ftdi/signalyzer-lite.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Signalyzer LITE"
ftdi_vid_pid 0x0403 0xbca1
ftdi device_desc "Signalyzer LITE"
ftdi vid_pid 0x0403 0xbca1
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020

10
tcl/interface/ftdi/signalyzer.cfg
View File

@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list
echo "so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Signalyzer"
ftdi_vid_pid 0x0403 0xbca0
ftdi device_desc "Signalyzer"
ftdi vid_pid 0x0403 0xbca0
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_init 0x0008 0x000b
ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020

6
tcl/interface/ftdi/snps_sdp.cfg
View File

@ -11,8 +11,8 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0088 0x008b
ftdi_channel 1
ftdi vid_pid 0x0403 0x6010
ftdi layout_init 0x0088 0x008b
ftdi channel 1

20
tcl/interface/ftdi/steppenprobe.cfg
View File

@ -6,10 +6,10 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi vid_pid 0x0403 0x6010
# Initial Layout
ftdi_layout_init 0x0058 0x99fb
ftdi layout_init 0x0058 0x99fb
# Signal Data Direction Notes
# TCK 0 1 (out)
# TDI 0 1 (out)
@ -30,12 +30,12 @@ ftdi_layout_init 0x0058 0x99fb
# Unused 0 1 (out)
# Signals definition
ftdi_layout_signal LED -ndata 0x0010
ftdi_layout_signal SWD_EN -data 0x0020
ftdi_layout_signal SWDIO_OE -ndata 0x0040
ftdi_layout_signal nSRST -oe 0x0080
ftdi layout_signal LED -ndata 0x0010
ftdi layout_signal SWD_EN -data 0x0020
ftdi layout_signal SWDIO_OE -ndata 0x0040
ftdi layout_signal nSRST -oe 0x0080
ftdi_layout_signal GPIO_A -data 0x0200 -oe 0x0200 -input 0x0200
ftdi_layout_signal GPIO_B -data 0x0400 -oe 0x0400 -input 0x0400
ftdi_layout_signal GPIO_C -data 0x2000 -oe 0x2000 -input 0x2000
ftdi_layout_signal GPIO_D -data 0x4000 -oe 0x4000 -input 0x4000
ftdi layout_signal GPIO_A -data 0x0200 -oe 0x0200 -input 0x0200
ftdi layout_signal GPIO_B -data 0x0400 -oe 0x0400 -input 0x0400
ftdi layout_signal GPIO_C -data 0x2000 -oe 0x2000 -input 0x2000
ftdi layout_signal GPIO_D -data 0x4000 -oe 0x4000 -input 0x4000

10
tcl/interface/ftdi/stm32-stick.cfg
View File

@ -5,9 +5,9 @@
#
adapter driver ftdi
ftdi_device_desc "STM32-PerformanceStick"
ftdi_vid_pid 0x0640 0x002d
ftdi device_desc "STM32-PerformanceStick"
ftdi vid_pid 0x0640 0x002d
ftdi_layout_init 0x0388 0x038b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0080 -noe 0x200
ftdi layout_init 0x0388 0x038b
ftdi layout_signal nTRST -data 0x0100
ftdi layout_signal nSRST -data 0x0080 -noe 0x200

2
tcl/interface/ftdi/swd-resistor-hack.cfg
View File

@ -23,4 +23,4 @@
transport select swd
ftdi_layout_signal SWD_EN -data 0
ftdi layout_signal SWD_EN -data 0

10
tcl/interface/ftdi/ti-icdi.cfg
View File

@ -7,9 +7,9 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0451 0xc32a
ftdi vid_pid 0x0451 0xc32a
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020
ftdi_layout_signal SWD_EN -ndata 0x0080
ftdi_layout_signal SWDIO_OE -data 0x0008
ftdi layout_init 0x00a8 0x00eb
ftdi layout_signal nSRST -noe 0x0020
ftdi layout_signal SWD_EN -ndata 0x0080
ftdi layout_signal SWDIO_OE -data 0x0008

8
tcl/interface/ftdi/tumpa-lite.cfg
View File

@ -5,8 +5,8 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x8a99
ftdi vid_pid 0x0403 0x8a99
ftdi_layout_init 0x0038 0x087b
ftdi_layout_signal nTRST -data 0x0020 -oe 0x0020
ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi layout_init 0x0038 0x087b
ftdi layout_signal nTRST -data 0x0020 -oe 0x0020
ftdi layout_signal nSRST -data 0x0010 -oe 0x0010

8
tcl/interface/ftdi/tumpa.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0x8a98 0x0403 0x6010
ftdi vid_pid 0x0403 0x8a98 0x0403 0x6010
ftdi_layout_init 0x0038 0x087b
ftdi_layout_signal nTRST -data 0x0020
ftdi_layout_signal nSRST -data 0x0010
ftdi layout_init 0x0038 0x087b
ftdi layout_signal nTRST -data 0x0020
ftdi layout_signal nSRST -data 0x0010
reset_config srst_push_pull

10
tcl/interface/ftdi/turtelizer2-revB.cfg
View File

@ -10,9 +10,9 @@ echo "in ft2232.c. Please report your experience with this file to openocd-devel
echo "mailing list, so it could be marked as working or fixed."
adapter driver ftdi
ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi_vid_pid 0x0403 0xbdc8
ftdi device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi vid_pid 0x0403 0xbdc8
ftdi_layout_init 0x0008 0x0c5b
ftdi_layout_signal nSRST -oe 0x0040
ftdi_layout_signal LED -data 0x0c00
ftdi layout_init 0x0008 0x0c5b
ftdi layout_signal nSRST -oe 0x0040
ftdi layout_signal LED -data 0x0c00

12
tcl/interface/ftdi/turtelizer2-revC.cfg
View File

@ -5,10 +5,10 @@
#
adapter driver ftdi
ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi_vid_pid 0x0403 0xbdc8
ftdi device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi vid_pid 0x0403 0xbdc8
ftdi_layout_init 0x0008 0x0c7b
ftdi_layout_signal nTRST -oe 0x0020
ftdi_layout_signal nSRST -oe 0x0040
ftdi_layout_signal LED -ndata 0x0c00
ftdi layout_init 0x0008 0x0c7b
ftdi layout_signal nTRST -oe 0x0020
ftdi layout_signal nSRST -oe 0x0040
ftdi layout_signal LED -ndata 0x0c00

10
tcl/interface/ftdi/um232h.cfg
View File

@ -8,12 +8,12 @@
#
adapter driver ftdi
#ftdi_device_desc "UM232H"
ftdi_vid_pid 0x0403 0x6014
#ftdi device_desc "UM232H"
ftdi vid_pid 0x0403 0x6014
ftdi_layout_init 0xfff8 0xfffb
ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200
ftdi layout_init 0xfff8 0xfffb
ftdi layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi layout_signal nSRST -data 0x0200 -oe 0x0200
# UM232H FT232H JTAG
# Name Pin Name Func

10
tcl/interface/ftdi/vpaclink.cfg
View File

@ -11,9 +11,9 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma
echo "as working or fixed."
adapter driver ftdi
ftdi_device_desc "VPACLink"
ftdi_vid_pid 0x0403 0x6010
ftdi device_desc "VPACLink"
ftdi vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi layout_init 0x0508 0x0f1b
ftdi layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi layout_signal nSRST -data 0x0800 -noe 0x0400

20
tcl/interface/ftdi/xds100v2.cfg
View File

@ -8,9 +8,9 @@
#
adapter driver ftdi
ftdi_vid_pid 0x0403 0xa6d0 0x0403 0x6010
ftdi vid_pid 0x0403 0xa6d0 0x0403 0x6010
ftdi_layout_init 0x0038 0x597b
ftdi layout_init 0x0038 0x597b
# 8000 z - unused
# 4000 0 > CPLD loopback (all target side pins high-Z)
@ -45,14 +45,14 @@ ftdi_layout_init 0x0038 0x597b
# changing the USB configuration to zero.)
#
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -oe 0x0100
ftdi_layout_signal EMU_EN -data 0x0020
ftdi_layout_signal EMU0 -oe 0x0040
ftdi_layout_signal EMU1 -oe 0x1000
ftdi_layout_signal PWR_RST -data 0x0800
ftdi_layout_signal LOOPBACK -data 0x4000
ftdi layout_signal nTRST -data 0x0010
ftdi layout_signal nSRST -oe 0x0100
ftdi layout_signal EMU_EN -data 0x0020
ftdi layout_signal EMU0 -oe 0x0040
ftdi layout_signal EMU1 -oe 0x1000
ftdi layout_signal PWR_RST -data 0x0800
ftdi layout_signal LOOPBACK -data 0x4000
echo "\nInfo : to use this adapter you MUST add ``init; ftdi_set_signal PWR_RST 1; jtag arp_init'' to the end of your config file!\n"
echo "\nInfo : to use this adapter you MUST add ``init; ftdi set_signal PWR_RST 1; jtag arp_init'' to the end of your config file!\n"
# note: rising edge on PWR_RST is also needed after power-cycling the
# target

2
tcl/interface/ftdi/xds100v3.cfg
View File

@ -8,4 +8,4 @@
source [find interface/ftdi/xds100v2.cfg]
# The USB ids are different.
ftdi_vid_pid 0x0403 0xa6d1
ftdi vid_pid 0x0403 0xa6d1