diff --git a/doc/openocd.texi b/doc/openocd.texi
index 5d1ef4ad8..e38e619db 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -357,13 +357,13 @@ a built-in low cost debug adapter and usb-to-serial solution.
 @item @b{signalyzer}
 @* See: @url{http://www.signalyzer.com}
 @item @b{Stellaris Eval Boards}
-@* See: @url{http://www.luminarymicro.com} - The Stellaris eval boards
+@* See: @url{http://www.ti.com} - The Stellaris eval boards
 bundle FT2232-based JTAG and SWD support, which can be used to debug
 the Stellaris chips.  Using separate JTAG adapters is optional.
 These boards can also be used in a "pass through" mode as JTAG adapters
 to other target boards, disabling the Stellaris chip.
-@item @b{Luminary ICDI}
-@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug
+@item @b{TI/Luminary ICDI}
+@* See: @url{http://www.ti.com} - TI/Luminary In-Circuit Debug
 Interface (ICDI) Boards are included in Stellaris LM3S9B9x
 Evaluation Kits.  Like the non-detachable FT2232 support on the other
 Stellaris eval boards, they can be used to debug other target boards.
@@ -2489,12 +2489,12 @@ Currently valid layout @var{name} values include:
 @item @b{axm0432_jtag} Axiom AXM-0432
 @item @b{comstick} Hitex STR9 comstick
 @item @b{cortino} Hitex Cortino JTAG interface
-@item @b{evb_lm3s811} Luminary Micro EVB_LM3S811 as a JTAG interface,
+@item @b{evb_lm3s811} TI/Luminary Micro EVB_LM3S811 as a JTAG interface,
 either for the local Cortex-M3 (SRST only)
 or in a passthrough mode (neither SRST nor TRST)
 This layout can not support the SWO trace mechanism, and should be
 used only for older boards (before rev C).
-@item @b{luminary_icdi} This layout should be used with most Luminary
+@item @b{luminary_icdi} This layout should be used with most TI/Luminary
 eval boards, including Rev C LM3S811 eval boards and the eponymous
 ICDI boards, to debug either the local Cortex-M3 or in passthrough mode
 to debug some other target.  It can support the SWO trace mechanism.