- updated svn:eol-style prop to native for AT91R40008
(Thanks to Spen for the hint) git-svn-id: svn://svn.berlios.de/openocd/trunk@420 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
mifi
parent
1d2f4f1463
commit
63e90b092a
|
|
@ -1,7 +1,7 @@
|
|||
wait_halt
|
||||
sleep 10
|
||||
poll
|
||||
# Ethernut 3 remapping is required to access external flash memory.
|
||||
mww 0xffe00000 0x1000213d
|
||||
mww 0xffe00004 0x20003e3d
|
||||
mww 0xffe00020 0x00000001
|
||||
wait_halt
|
||||
sleep 10
|
||||
poll
|
||||
# Ethernut 3 remapping is required to access external flash memory.
|
||||
mww 0xffe00000 0x1000213d
|
||||
mww 0xffe00004 0x20003e3d
|
||||
mww 0xffe00020 0x00000001
|
||||
|
|
|
|||
|
|
@ -1,40 +1,40 @@
|
|||
#daemon configuration
|
||||
telnet_port 4444
|
||||
gdb_port 3333
|
||||
|
||||
# tell gdb our flash memory map
|
||||
gdb_memory_map enable
|
||||
# enable flash programming
|
||||
gdb_flash_program enable
|
||||
|
||||
#interface
|
||||
interface ft2232
|
||||
ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
|
||||
ft2232_layout turtelizer2
|
||||
ft2232_vid_pid 0x0403 0xbdc8
|
||||
jtag_speed 0
|
||||
jtag_nsrst_delay 200
|
||||
jtag_ntrst_delay 200
|
||||
|
||||
#use combined on interfaces or targets that can't set TRST/SRST separately
|
||||
reset_config srst_only
|
||||
|
||||
#jtag scan chain
|
||||
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
||||
jtag_device 4 0x1 0xf 0xe
|
||||
|
||||
#target configuration
|
||||
daemon_startup reset
|
||||
|
||||
#target <type> <startup mode>
|
||||
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
|
||||
target arm7tdmi little run_and_init 0 arm7tdmi
|
||||
run_and_halt_time 0 30
|
||||
|
||||
target_script 0 reset .\prj\at91r40008_reset.script
|
||||
|
||||
working_area 0 0x3C000 0x4000 nobackup
|
||||
flash bank cfi 0x10000000 0x400000 2 2 0
|
||||
|
||||
# For more information about the configuration files, take a look at:
|
||||
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
|
||||
#daemon configuration
|
||||
telnet_port 4444
|
||||
gdb_port 3333
|
||||
|
||||
# tell gdb our flash memory map
|
||||
gdb_memory_map enable
|
||||
# enable flash programming
|
||||
gdb_flash_program enable
|
||||
|
||||
#interface
|
||||
interface ft2232
|
||||
ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
|
||||
ft2232_layout turtelizer2
|
||||
ft2232_vid_pid 0x0403 0xbdc8
|
||||
jtag_speed 0
|
||||
jtag_nsrst_delay 200
|
||||
jtag_ntrst_delay 200
|
||||
|
||||
#use combined on interfaces or targets that can't set TRST/SRST separately
|
||||
reset_config srst_only
|
||||
|
||||
#jtag scan chain
|
||||
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
||||
jtag_device 4 0x1 0xf 0xe
|
||||
|
||||
#target configuration
|
||||
daemon_startup reset
|
||||
|
||||
#target <type> <startup mode>
|
||||
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
|
||||
target arm7tdmi little run_and_init 0 arm7tdmi
|
||||
run_and_halt_time 0 30
|
||||
|
||||
target_script 0 reset .\prj\at91r40008_reset.script
|
||||
|
||||
working_area 0 0x3C000 0x4000 nobackup
|
||||
flash bank cfi 0x10000000 0x400000 2 2 0
|
||||
|
||||
# For more information about the configuration files, take a look at:
|
||||
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
target remote localhost:3333
|
||||
monitor reset
|
||||
monitor sleep 500
|
||||
monitor poll
|
||||
monitor soft_reset_halt
|
||||
monitor arm7_9 sw_bkpts enable
|
||||
monitor mww 0xFFE00000 0x1000213D
|
||||
monitor mww 0xFFE00004 0x20003E3D
|
||||
monitor mww 0xFFE00020 0x00000001
|
||||
monitor mdw 0xFFE00000 1
|
||||
monitor mdw 0xFFE00004 1
|
||||
load
|
||||
break main
|
||||
continue
|
||||
target remote localhost:3333
|
||||
monitor reset
|
||||
monitor sleep 500
|
||||
monitor poll
|
||||
monitor soft_reset_halt
|
||||
monitor arm7_9 sw_bkpts enable
|
||||
monitor mww 0xFFE00000 0x1000213D
|
||||
monitor mww 0xFFE00004 0x20003E3D
|
||||
monitor mww 0xFFE00020 0x00000001
|
||||
monitor mdw 0xFFE00000 1
|
||||
monitor mdw 0xFFE00004 1
|
||||
load
|
||||
break main
|
||||
continue
|
||||
|
|
|
|||
|
|
@ -1,140 +1,140 @@
|
|||
/****************************************************************************
|
||||
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the author nor the names of its contributors may
|
||||
* be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
||||
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************
|
||||
*
|
||||
* History:
|
||||
*
|
||||
* 09.04.06 mifi First Version
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
ENTRY(ResetHandler)
|
||||
SEARCH_DIR(.)
|
||||
|
||||
/*
|
||||
* Define stack size here
|
||||
*/
|
||||
FIQ_STACK_SIZE = 0x0100;
|
||||
IRQ_STACK_SIZE = 0x0100;
|
||||
ABT_STACK_SIZE = 0x0100;
|
||||
UND_STACK_SIZE = 0x0100;
|
||||
SVC_STACK_SIZE = 0x0400;
|
||||
|
||||
/*
|
||||
* This file, ethernut3_ram.ld, locate the program in the internal
|
||||
* ram of the AT91R40008. For more information about the memory of the
|
||||
* AT91R40008 take a look in the AT91 ARM data sheet.
|
||||
* Reference is made to Rev. 1354D-ATARM-08/02
|
||||
*
|
||||
* Take a look at page 15, Memory Map, Figure 3
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
ram : org = 0x00000000, len = 256k
|
||||
}
|
||||
|
||||
/*
|
||||
* Do not change the next code
|
||||
*/
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
*(.vectors);
|
||||
. = ALIGN(4);
|
||||
*(.init);
|
||||
. = ALIGN(4);
|
||||
*(.text);
|
||||
. = ALIGN(4);
|
||||
*(.rodata);
|
||||
. = ALIGN(4);
|
||||
*(.rodata*);
|
||||
. = ALIGN(4);
|
||||
*(.glue_7t);
|
||||
. = ALIGN(4);
|
||||
*(.glue_7);
|
||||
. = ALIGN(4);
|
||||
etext = .;
|
||||
} > ram
|
||||
|
||||
.data :
|
||||
{
|
||||
PROVIDE (__data_start = .);
|
||||
*(.data)
|
||||
. = ALIGN(4);
|
||||
edata = .;
|
||||
_edata = .;
|
||||
PROVIDE (__data_end = .);
|
||||
} > ram
|
||||
|
||||
.bss :
|
||||
{
|
||||
PROVIDE (__bss_start = .);
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__bss_end = .);
|
||||
|
||||
. = ALIGN(256);
|
||||
|
||||
PROVIDE (__stack_start = .);
|
||||
|
||||
PROVIDE (__stack_fiq_start = .);
|
||||
. += FIQ_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_fiq_end = .);
|
||||
|
||||
PROVIDE (__stack_irq_start = .);
|
||||
. += IRQ_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_irq_end = .);
|
||||
|
||||
PROVIDE (__stack_abt_start = .);
|
||||
. += ABT_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_abt_end = .);
|
||||
|
||||
PROVIDE (__stack_und_start = .);
|
||||
. += UND_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_und_end = .);
|
||||
|
||||
PROVIDE (__stack_svc_start = .);
|
||||
. += SVC_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_svc_end = .);
|
||||
PROVIDE (__stack_end = .);
|
||||
PROVIDE (__heap_start = .);
|
||||
} > ram
|
||||
|
||||
}
|
||||
/*** EOF ***/
|
||||
|
||||
/****************************************************************************
|
||||
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the author nor the names of its contributors may
|
||||
* be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
||||
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************
|
||||
*
|
||||
* History:
|
||||
*
|
||||
* 09.04.06 mifi First Version
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
ENTRY(ResetHandler)
|
||||
SEARCH_DIR(.)
|
||||
|
||||
/*
|
||||
* Define stack size here
|
||||
*/
|
||||
FIQ_STACK_SIZE = 0x0100;
|
||||
IRQ_STACK_SIZE = 0x0100;
|
||||
ABT_STACK_SIZE = 0x0100;
|
||||
UND_STACK_SIZE = 0x0100;
|
||||
SVC_STACK_SIZE = 0x0400;
|
||||
|
||||
/*
|
||||
* This file, ethernut3_ram.ld, locate the program in the internal
|
||||
* ram of the AT91R40008. For more information about the memory of the
|
||||
* AT91R40008 take a look in the AT91 ARM data sheet.
|
||||
* Reference is made to Rev. 1354D-ATARM-08/02
|
||||
*
|
||||
* Take a look at page 15, Memory Map, Figure 3
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
ram : org = 0x00000000, len = 256k
|
||||
}
|
||||
|
||||
/*
|
||||
* Do not change the next code
|
||||
*/
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
*(.vectors);
|
||||
. = ALIGN(4);
|
||||
*(.init);
|
||||
. = ALIGN(4);
|
||||
*(.text);
|
||||
. = ALIGN(4);
|
||||
*(.rodata);
|
||||
. = ALIGN(4);
|
||||
*(.rodata*);
|
||||
. = ALIGN(4);
|
||||
*(.glue_7t);
|
||||
. = ALIGN(4);
|
||||
*(.glue_7);
|
||||
. = ALIGN(4);
|
||||
etext = .;
|
||||
} > ram
|
||||
|
||||
.data :
|
||||
{
|
||||
PROVIDE (__data_start = .);
|
||||
*(.data)
|
||||
. = ALIGN(4);
|
||||
edata = .;
|
||||
_edata = .;
|
||||
PROVIDE (__data_end = .);
|
||||
} > ram
|
||||
|
||||
.bss :
|
||||
{
|
||||
PROVIDE (__bss_start = .);
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__bss_end = .);
|
||||
|
||||
. = ALIGN(256);
|
||||
|
||||
PROVIDE (__stack_start = .);
|
||||
|
||||
PROVIDE (__stack_fiq_start = .);
|
||||
. += FIQ_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_fiq_end = .);
|
||||
|
||||
PROVIDE (__stack_irq_start = .);
|
||||
. += IRQ_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_irq_end = .);
|
||||
|
||||
PROVIDE (__stack_abt_start = .);
|
||||
. += ABT_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_abt_end = .);
|
||||
|
||||
PROVIDE (__stack_und_start = .);
|
||||
. += UND_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_und_end = .);
|
||||
|
||||
PROVIDE (__stack_svc_start = .);
|
||||
. += SVC_STACK_SIZE;
|
||||
. = ALIGN(4);
|
||||
PROVIDE (__stack_svc_end = .);
|
||||
PROVIDE (__stack_end = .);
|
||||
PROVIDE (__heap_start = .);
|
||||
} > ram
|
||||
|
||||
}
|
||||
/*** EOF ***/
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue