interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Run autoconf

This commit is contained in:
Palmer Dabbelt 2017-06-22 13:37:21 -07:00
parent d77c4a953c
commit 56645aa10b
19 changed files with 105973 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

370
INSTALL Normal file
View File

@ -0,0 +1,370 @@
Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell command `./configure && make && make install'
should configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX `make' updates targets which have the same time stamps as
their prerequisites, which makes it generally unusable when shipped
generated files such as `configure' are involved. Use GNU `make'
instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf limitation. Until the limitation is lifted, you can use
this workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

4457
Makefile.in Normal file
View File

File diff suppressed because it is too large Load Diff

10590
aclocal.m4 vendored Normal file
View File

File diff suppressed because it is too large Load Diff

19430
autom4te.cache/output.0 Normal file
View File

File diff suppressed because it is too large Load Diff

19426
autom4te.cache/output.1 Normal file
View File

File diff suppressed because it is too large Load Diff

314
autom4te.cache/requests Normal file
View File

@ -0,0 +1,314 @@
# This file was generated by Autom4te Fri Oct 23 20:57:39 UTC 2015.
# It contains the lists of macros which have been traced.
# It can be safely removed.
@request = (
bless( [
'0',
1,
[
'/usr/share/autoconf'
],
[
'/usr/share/autoconf/autoconf/autoconf.m4f',
'-',
'/usr/share/aclocal-1.15/internal/ac-config-macro-dirs.m4',
'/usr/share/aclocal/libtool.m4',
'/usr/share/aclocal/longlong.m4',
'/usr/share/aclocal/ltargz.m4',
'/usr/share/aclocal/ltdl.m4',
'/usr/share/aclocal/ltoptions.m4',
'/usr/share/aclocal/ltsugar.m4',
'/usr/share/aclocal/ltversion.m4',
'/usr/share/aclocal/lt~obsolete.m4',
'/usr/share/aclocal/pkg.m4',
'/usr/share/aclocal-1.15/amversion.m4',
'/usr/share/aclocal-1.15/auxdir.m4',
'/usr/share/aclocal-1.15/cond.m4',
'/usr/share/aclocal-1.15/depend.m4',
'/usr/share/aclocal-1.15/depout.m4',
'/usr/share/aclocal-1.15/init.m4',
'/usr/share/aclocal-1.15/install-sh.m4',
'/usr/share/aclocal-1.15/lead-dot.m4',
'/usr/share/aclocal-1.15/make.m4',
'/usr/share/aclocal-1.15/missing.m4',
'/usr/share/aclocal-1.15/options.m4',
'/usr/share/aclocal-1.15/prog-cc-c-o.m4',
'/usr/share/aclocal-1.15/runlog.m4',
'/usr/share/aclocal-1.15/sanity.m4',
'/usr/share/aclocal-1.15/silent.m4',
'/usr/share/aclocal-1.15/strip.m4',
'/usr/share/aclocal-1.15/substnot.m4',
'/usr/share/aclocal-1.15/tar.m4',
'configure.ac'
],
{
'_LT_AC_LANG_F77' => 1,
'_AM_SET_OPTION' => 1,
'm4_include' => 1,
'_LT_REQUIRED_DARWIN_CHECKS' => 1,
'AM_MAKE_INCLUDE' => 1,
'AM_INIT_AUTOMAKE' => 1,
'_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1,
'PKG_CHECK_MODULES' => 1,
'LT_FUNC_ARGZ' => 1,
'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1,
'_PKG_SHORT_ERRORS_SUPPORTED' => 1,
'AC_LIBTOOL_DLOPEN_SELF' => 1,
'LT_OUTPUT' => 1,
'LT_PROG_RC' => 1,
'_LT_AC_SHELL_INIT' => 1,
'_LT_LIBOBJ' => 1,
'_AC_TYPE_LONG_LONG_SNIPPET' => 1,
'AC_PROG_LD' => 1,
'PKG_CHECK_MODULES_STATIC' => 1,
'AC_LTDL_SHLIBPATH' => 1,
'AC_LIBTOOL_SYS_OLD_ARCHIVE' => 1,
'LTOPTIONS_VERSION' => 1,
'_m4_warn' => 1,
'AC_CHECK_LIBM' => 1,
'AC_LIBTOOL_CONFIG' => 1,
'_LT_AC_LANG_GCJ' => 1,
'_LT_PATH_TOOL_PREFIX' => 1,
'_LT_PROG_CXX' => 1,
'AC_LIBTOOL_WIN32_DLL' => 1,
'AC_PROG_EGREP' => 1,
'LT_SYS_DLSEARCH_PATH' => 1,
'_LT_AC_LOCK' => 1,
'LT_SYS_DLOPEN_SELF' => 1,
'LT_SYS_MODULE_EXT' => 1,
'AC_PROG_NM' => 1,
'_LT_AC_TAGVAR' => 1,
'AC_DEPLIBS_CHECK_METHOD' => 1,
'LT_PROG_GO' => 1,
'AC_LIBTOOL_LANG_CXX_CONFIG' => 1,
'PKG_NOARCH_INSTALLDIR' => 1,
'AC_LIBLTDL_CONVENIENCE' => 1,
'AC_LIBTOOL_FC' => 1,
'm4_pattern_forbid' => 1,
'AM_RUN_LOG' => 1,
'_AM_AUTOCONF_VERSION' => 1,
'LT_AC_PROG_RC' => 1,
'AC_LIBTOOL_F77' => 1,
'AC_TYPE_UNSIGNED_LONG_LONG_INT' => 1,
'AC_LIBTOOL_RC' => 1,
'AC_DEFUN_ONCE' => 1,
'LT_WITH_LTDL' => 1,
'AC_LTDL_DLLIB' => 1,
'_LT_LINKER_BOILERPLATE' => 1,
'LT_SYS_SYMBOL_USCORE' => 1,
'AM_SET_LEADING_DOT' => 1,
'LT_PATH_LD' => 1,
'LT_PATH_NM' => 1,
'AM_AUTOMAKE_VERSION' => 1,
'_AM_IF_OPTION' => 1,
'_LT_AC_FILE_LTDLL_C' => 1,
'_LT_AC_PROG_ECHO_BACKSLASH' => 1,
'PKG_CHECK_EXISTS' => 1,
'_AM_SUBST_NOTMAKE' => 1,
'_AM_DEPENDENCIES' => 1,
'AC_PROG_LD_GNU' => 1,
'AC_PROG_LD_RELOAD_FLAG' => 1,
'LT_AC_PROG_EGREP' => 1,
'LTDL_INSTALLABLE' => 1,
'AC_LIBTOOL_PROG_COMPILER_PIC' => 1,
'LT_AC_PROG_SED' => 1,
'AC_ENABLE_FAST_INSTALL' => 1,
'LT_SYS_DLOPEN_DEPLIBS' => 1,
'AC_LIBTOOL_SETUP' => 1,
'LTSUGAR_VERSION' => 1,
'LTDL_CONVENIENCE' => 1,
'LT_LIB_DLLOAD' => 1,
'AM_PROG_INSTALL_SH' => 1,
'AM_DISABLE_SHARED' => 1,
'_LT_AC_LANG_GCJ_CONFIG' => 1,
'_LT_AC_LANG_C_CONFIG' => 1,
'_LTDL_SETUP' => 1,
'_LT_LINKER_OPTION' => 1,
'AM_PROG_INSTALL_STRIP' => 1,
'AC_LIBTOOL_LANG_GCJ_CONFIG' => 1,
'LT_CONFIG_LTDL_DIR' => 1,
'_LT_PROG_FC' => 1,
'LT_AC_PROG_GCJ' => 1,
'AC_LIB_LTDL' => 1,
'AC_LTDL_ENABLE_INSTALL' => 1,
'AM_ENABLE_SHARED' => 1,
'LT_LANG' => 1,
'AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE' => 1,
'AM_PROG_NM' => 1,
'AC_LIBTOOL_CXX' => 1,
'_LT_AC_SYS_COMPILER' => 1,
'LT_LIB_M' => 1,
'_LT_COMPILER_OPTION' => 1,
'AC_LIBTOOL_SYS_MAX_CMD_LEN' => 1,
'AC_LTDL_SYS_DLOPEN_DEPLIBS' => 1,
'AC_LIBTOOL_SYS_DYNAMIC_LINKER' => 1,
'AC_LIBTOOL_POSTDEP_PREDEP' => 1,
'AC_LIBTOOL_LANG_C_CONFIG' => 1,
'_AM_MANGLE_OPTION' => 1,
'AC_LIBTOOL_SYS_LIB_STRIP' => 1,
'_LT_PROG_F77' => 1,
'_LT_PROG_LTMAIN' => 1,
'AC_LIBTOOL_PROG_LD_SHLIBS' => 1,
'AC_DISABLE_SHARED' => 1,
'PKG_INSTALLDIR' => 1,
'_AC_PROG_LIBTOOL' => 1,
'AC_DISABLE_STATIC' => 1,
'AM_DEP_TRACK' => 1,
'_AM_SET_OPTIONS' => 1,
'LTVERSION_VERSION' => 1,
'AM_PROG_LD' => 1,
'LT_CMD_MAX_LEN' => 1,
'AM_PROG_LIBTOOL' => 1,
'AM_DISABLE_STATIC' => 1,
'AM_CONDITIONAL' => 1,
'AM_PROG_CC_C_O' => 1,
'm4_pattern_allow' => 1,
'_LT_AC_CHECK_DLFCN' => 1,
'PKG_PROG_PKG_CONFIG' => 1,
'_LT_AC_LANG_F77_CONFIG' => 1,
'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1,
'AU_DEFUN' => 1,
'_LT_CC_BASENAME' => 1,
'AC_TYPE_LONG_LONG_INT' => 1,
'_LT_PREPARE_SED_QUOTE_VARS' => 1,
'LT_INIT' => 1,
'_LT_DLL_DEF_P' => 1,
'_LT_COMPILER_BOILERPLATE' => 1,
'AC_WITH_LTDL' => 1,
'AM_SILENT_RULES' => 1,
'_AM_CONFIG_MACRO_DIRS' => 1,
'AC_LIBTOOL_LANG_RC_CONFIG' => 1,
'AC_LIBTOOL_COMPILER_OPTION' => 1,
'LTDL_INIT' => 1,
'AX_CONFIG_SUBDIR_OPTION' => 1,
'include' => 1,
'_LT_AC_LANG_CXX_CONFIG' => 1,
'AC_LTDL_PREOPEN' => 1,
'_AM_PROG_CC_C_O' => 1,
'_LT_WITH_SYSROOT' => 1,
'LT_SYS_MODULE_PATH' => 1,
'PKG_CHECK_VAR' => 1,
'AM_MISSING_PROG' => 1,
'AC_LTDL_SYMBOL_USCORE' => 1,
'AC_LTDL_SYSSEARCHPATH' => 1,
'AC_ENABLE_SHARED' => 1,
'AC_LIBTOOL_OBJDIR' => 1,
'AM_SANITY_CHECK' => 1,
'_AM_PROG_TAR' => 1,
'AC_LIBLTDL_INSTALLABLE' => 1,
'_LT_AC_LANG_CXX' => 1,
'LT_SUPPORTED_TAG' => 1,
'AC_LTDL_DLSYM_USCORE' => 1,
'AC_LIBTOOL_LANG_F77_CONFIG' => 1,
'AM_SET_DEPDIR' => 1,
'_LT_AC_TRY_DLOPEN_SELF' => 1,
'AC_LIBTOOL_PROG_COMPILER_NO_RTTI' => 1,
'AC_LTDL_OBJDIR' => 1,
'_LT_PROG_ECHO_BACKSLASH' => 1,
'AC_DISABLE_FAST_INSTALL' => 1,
'AC_LIBTOOL_SYS_HARD_LINK_LOCKS' => 1,
'AC_LIBTOOL_PROG_CC_C_O' => 1,
'LT_PROG_GCJ' => 1,
'_LT_AC_LANG_RC_CONFIG' => 1,
'AM_ENABLE_STATIC' => 1,
'LT_FUNC_DLSYM_USCORE' => 1,
'AC_LIBTOOL_PICMODE' => 1,
'_LT_AC_SYS_LIBPATH_AIX' => 1,
'AC_CONFIG_MACRO_DIR' => 1,
'AC_LIBTOOL_DLOPEN' => 1,
'_LT_AC_PROG_CXXCPP' => 1,
'AM_SUBST_NOTMAKE' => 1,
'AC_PATH_TOOL_PREFIX' => 1,
'AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH' => 1,
'AC_LIBTOOL_LINKER_OPTION' => 1,
'AC_PROG_LIBTOOL' => 1,
'AC_LIBTOOL_GCJ' => 1,
'AC_CONFIG_MACRO_DIR_TRACE' => 1,
'AC_ENABLE_STATIC' => 1,
'_AC_AM_CONFIG_HEADER_HOOK' => 1,
'AC_DEFUN' => 1,
'_LT_AC_TAGCONFIG' => 1,
'AM_MISSING_HAS_RUN' => 1,
'AC_PATH_MAGIC' => 1,
'LTOBSOLETE_VERSION' => 1,
'AM_AUX_DIR_EXPAND' => 1,
'AC_LTDL_SHLIBEXT' => 1
}
], 'Autom4te::Request' ),
bless( [
'1',
1,
[
'/usr/share/autoconf'
],
[
'/usr/share/autoconf/autoconf/autoconf.m4f',
'aclocal.m4',
'configure.ac'
],
{
'AM_PROG_MKDIR_P' => 1,
'm4_pattern_allow' => 1,
'AC_DEFINE_TRACE_LITERAL' => 1,
'AM_PROG_FC_C_O' => 1,
'AM_XGETTEXT_OPTION' => 1,
'AC_CANONICAL_HOST' => 1,
'_AM_COND_ENDIF' => 1,
'AC_REQUIRE_AUX_FILE' => 1,
'LT_INIT' => 1,
'm4_pattern_forbid' => 1,
'AM_EXTRA_RECURSIVE_TARGETS' => 1,
'LT_CONFIG_LTDL_DIR' => 1,
'AH_OUTPUT' => 1,
'AM_MAKEFILE_INCLUDE' => 1,
'AC_FC_PP_SRCEXT' => 1,
'AC_INIT' => 1,
'AM_SILENT_RULES' => 1,
'AC_FC_FREEFORM' => 1,
'AC_PROG_LIBTOOL' => 1,
'AM_PROG_MOC' => 1,
'm4_sinclude' => 1,
'include' => 1,
'_LT_AC_TAGCONFIG' => 1,
'AC_FC_SRCEXT' => 1,
'AM_POT_TOOLS' => 1,
'AC_CONFIG_SUBDIRS' => 1,
'AC_CANONICAL_BUILD' => 1,
'AM_ENABLE_MULTILIB' => 1,
'AM_PATH_GUILE' => 1,
'AC_CONFIG_LINKS' => 1,
'AC_FC_PP_DEFINE' => 1,
'_AM_SUBST_NOTMAKE' => 1,
'AM_GNU_GETTEXT' => 1,
'AC_LIBSOURCE' => 1,
'AM_PROG_F77_C_O' => 1,
'_AM_COND_IF' => 1,
'AC_CONFIG_LIBOBJ_DIR' => 1,
'AC_CANONICAL_SYSTEM' => 1,
'_AM_COND_ELSE' => 1,
'AM_GNU_GETTEXT_INTL_SUBDIR' => 1,
'AM_AUTOMAKE_VERSION' => 1,
'm4_include' => 1,
'AM_PROG_AR' => 1,
'AC_CANONICAL_TARGET' => 1,
'AM_INIT_AUTOMAKE' => 1,
'AM_MAINTAINER_MODE' => 1,
'AM_CONDITIONAL' => 1,
'LT_SUPPORTED_TAG' => 1,
'AC_CONFIG_AUX_DIR' => 1,
'AM_PROG_LIBTOOL' => 1,
'AC_CONFIG_FILES' => 1,
'AC_CONFIG_HEADERS' => 1,
'sinclude' => 1,
'_AM_MAKEFILE_INCLUDE' => 1,
'_m4_warn' => 1,
'AM_PROG_CXX_C_O' => 1,
'AC_SUBST_TRACE' => 1,
'AM_PROG_CC_C_O' => 1,
'AC_SUBST' => 1,
'AM_NLS' => 1
}
], 'Autom4te::Request' )
);

3419
autom4te.cache/traces.0 Normal file
View File

File diff suppressed because it is too large Load Diff

1629
autom4te.cache/traces.1 Normal file
View File

File diff suppressed because it is too large Load Diff

347
compile Executable file
View File

@ -0,0 +1,347 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2012-10-14.11; # UTC
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

1441
config.guess vendored Executable file
View File

File diff suppressed because it is too large Load Diff

334
config.h.in Normal file
View File

@ -0,0 +1,334 @@
/* config.h.in. Generated from configure.ac by autoheader. */
/* Define if building universal (internal helper macro) */
#undef AC_APPLE_UNIVERSAL_BUILD
/* 0 if you do not want the Andes JTAG Programmer. */
#undef BUILD_AICE
/* 0 if you don't want the Amontec JTAG-Accelerator driver. */
#undef BUILD_AMTJTAGACCEL
/* 0 if you do not want the Olimex ARM-JTAG-EW Programmer. */
#undef BUILD_ARMJTAGEW
/* 0 if you don't want at91rm9200. */
#undef BUILD_AT91RM9200
/* 0 if you don't want bcm2835gpio. */
#undef BUILD_BCM2835GPIO
/* 0 if you don't want the Buspirate JTAG driver. */
#undef BUILD_BUSPIRATE
/* 0 if you do not want the CMSIS-DAP Compliant Debugger. */
#undef BUILD_CMSIS_DAP
/* 0 if you don't want dummy driver. */
#undef BUILD_DUMMY
/* 0 if you don't want ep93xx. */
#undef BUILD_EP93XX
/* 0 if you do not want the MPSSE mode of FTDI based devices. */
#undef BUILD_FTDI
/* 0 if you don't want the Gateworks GW16012 driver. */
#undef BUILD_GW16012
/* 0 if you want the High Level JTAG driver. */
#undef BUILD_HLADAPTER
/* 0 if you do not want the TI ICDI JTAG Programmer. */
#undef BUILD_HLADAPTER_ICDI
/* 0 if you do not want the ST-Link JTAG Programmer. */
#undef BUILD_HLADAPTER_STLINK
/* 0 if you don't want imx_gpio. */
#undef BUILD_IMX_GPIO
/* 0 if you do not want the SEGGER J-Link Programmer. */
#undef BUILD_JLINK
/* 0 if you don't want JTAG VPI. */
#undef BUILD_JTAG_VPI
/* 0 if you do not want the Cypress KitProg Programmer. */
#undef BUILD_KITPROG
/* Use the dummy minidriver. */
#undef BUILD_MINIDRIVER_DUMMY
/* 0 if you don't want the OpenOCD+trace ETM capture driver. */
#undef BUILD_OOCD_TRACE
/* 0 if you do not want the eStick/opendous JTAG Programmer. */
#undef BUILD_OPENDOUS
/* 0 if you do not want the OpenJTAG Adapter. */
#undef BUILD_OPENJTAG
/* 0 if you do not want the OSBDM (JTAG only) Programmer. */
#undef BUILD_OSBDM
/* 0 if you don't want parport. */
#undef BUILD_PARPORT
/* 0 if you do not want the ASIX Presto Adapter. */
#undef BUILD_PRESTO
/* 0 if you don't want the Remote Bitbang JTAG driver. */
#undef BUILD_REMOTE_BITBANG
/* 0 if you do not want the Raisonance RLink JTAG Programmer. */
#undef BUILD_RLINK
/* 0 if you don't want SysfsGPIO driver. */
#undef BUILD_SYSFSGPIO
/* 0 if you don't want 64-bit addresses. */
#undef BUILD_TARGET64
/* 0 if you do not want the Keil ULINK JTAG Programmer. */
#undef BUILD_ULINK
/* 0 if you do not want the USBProg JTAG Programmer. */
#undef BUILD_USBPROG
/* 0 if you do not want the Altera USB-Blaster Compatible. */
#undef BUILD_USB_BLASTER
/* 0 if you do not want the Altera USB-Blaster II Compatible. */
#undef BUILD_USB_BLASTER_2
/* 0 if you do not want the Versaloon-Link JTAG Programmer. */
#undef BUILD_VSLLINK
/* 0 if you don't want ZY1000. */
#undef BUILD_ZY1000
/* 0 if you don't want ZY1000 JTAG master registers. */
#undef BUILD_ZY1000_MASTER
/* Define to 1 if you have the <arpa/inet.h> header file. */
#undef HAVE_ARPA_INET_H
/* Define to 1 if you have the <dirent.h> header file. */
#undef HAVE_DIRENT_H
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <elf.h> header file. */
#undef HAVE_ELF_H
/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
/* Define to 1 if you have the `gettimeofday' function. */
#undef HAVE_GETTIMEOFDAY
/* Define to 1 if you have the <ifaddrs.h> header file. */
#undef HAVE_IFADDRS_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the <jtag_minidriver.h> header file. */
#undef HAVE_JTAG_MINIDRIVER_H
/* Define if you have libusb-1.x */
#undef HAVE_LIBUSB1
/* Define if your libusb has libusb_error_name() */
#undef HAVE_LIBUSB_ERROR_NAME
/* Define if your libusb has libusb_get_port_numbers() */
#undef HAVE_LIBUSB_GET_PORT_NUMBERS
/* Define to 1 if the system has the type 'long long int'. */
#undef HAVE_LONG_LONG_INT
/* Define to 1 if you have the <malloc.h> header file. */
#undef HAVE_MALLOC_H
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the <netdb.h> header file. */
#undef HAVE_NETDB_H
/* Define to 1 if you have the <netinet/in.h> header file. */
#undef HAVE_NETINET_IN_H
/* Define to 1 if you have the <netinet/tcp.h> header file. */
#undef HAVE_NETINET_TCP_H
/* Define to 1 if you have the <net/if.h> header file. */
#undef HAVE_NET_IF_H
/* Define to 1 if you have the <poll.h> header file. */
#undef HAVE_POLL_H
/* Define to 1 if you have the <pthread.h> header file. */
#undef HAVE_PTHREAD_H
/* Define to 1 if you have the `realpath' function. */
#undef HAVE_REALPATH
/* Define to 1 if stdbool.h conforms to C99. */
#undef HAVE_STDBOOL_H
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the `strndup' function. */
#undef HAVE_STRNDUP
/* Define to 1 if you have the `strnlen' function. */
#undef HAVE_STRNLEN
/* Define to 1 if you have the <sys/ioctl.h> header file. */
#undef HAVE_SYS_IOCTL_H
/* Define to 1 if you have the <sys/io.h> header file. */
#undef HAVE_SYS_IO_H
/* Define to 1 if you have the <sys/param.h> header file. */
#undef HAVE_SYS_PARAM_H
/* Define to 1 if you have the <sys/select.h> header file. */
#undef HAVE_SYS_SELECT_H
/* Define to 1 if you have the <sys/socket.h> header file. */
#undef HAVE_SYS_SOCKET_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/sysctl.h> header file. */
#undef HAVE_SYS_SYSCTL_H
/* Define to 1 if you have the <sys/time.h> header file. */
#undef HAVE_SYS_TIME_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if the system has the type 'unsigned long long int'. */
#undef HAVE_UNSIGNED_LONG_LONG_INT
/* Define to 1 if you have the `usleep' function. */
#undef HAVE_USLEEP
/* Define to 1 if you have the `vasprintf' function. */
#undef HAVE_VASPRINTF
/* Define to 1 if the system has the type `_Bool'. */
#undef HAVE__BOOL
/* 0 if not building for Cygwin. */
#undef IS_CYGWIN
/* 0 if not building for Darwin. */
#undef IS_DARWIN
/* 0 if not building for Mingw. */
#undef IS_MINGW
/* 0 if not building for Win32. */
#undef IS_WIN32
/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Define to 1 if assertions should be disabled. */
#undef NDEBUG
/* Must declare 'environ' to use it. */
#undef NEED_ENVIRON_EXTERN
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* 0 if you don't want parport to use giveio. */
#undef PARPORT_USE_GIVEIO
/* 0 if you don't want parport to use ppdev. */
#undef PARPORT_USE_PPDEV
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
#undef TIME_WITH_SYS_TIME
/* Version number of package */
#undef VERSION
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel). */
#if defined AC_APPLE_UNIVERSAL_BUILD
# if defined __BIG_ENDIAN__
# define WORDS_BIGENDIAN 1
# endif
#else
# ifndef WORDS_BIGENDIAN
# undef WORDS_BIGENDIAN
# endif
#endif
/* Include malloc free space in logging */
#undef _DEBUG_FREE_SPACE_
/* Print verbose JTAG I/O messages */
#undef _DEBUG_JTAG_IO_
/* Print verbose USB communication messages */
#undef _DEBUG_USB_COMMS_
/* Print verbose USB I/O messages */
#undef _DEBUG_USB_IO_
/* Use GNU C library extensions (e.g. stdndup). */
#undef _GNU_SOURCE
/* Define to empty if `const' does not conform to ANSI C. */
#undef const
#include <helper/system.h>
#include <helper/types.h>
#include <helper/replacements.h>

1813
config.sub vendored Executable file
View File

File diff suppressed because it is too large Load Diff

19426
configure vendored Executable file
View File

File diff suppressed because it is too large Load Diff

791
depcomp Executable file
View File

@ -0,0 +1,791 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2013-05-30.07; # UTC
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

508
install-sh Executable file
View File

@ -0,0 +1,508 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2014-09-12.12; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
tab=' '
nl='
'
IFS=" $tab$nl"
# Set DOITPROG to "echo" to test this script.
doit=${DOITPROG-}
doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
# $RANDOM is not portable (e.g. dash); use it when possible to
# lower collision chance
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
# As "mkdir -p" follows symlinks and we work in /tmp possibly; so
# create the $tmpdir first (and fail if unsuccessful) to make sure
# that nobody tries to guess the $tmpdir name.
if (umask $mkdir_umask &&
$mkdirprog $mkdir_mode "$tmpdir" &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
test_tmpdir="$tmpdir/a"
ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
oIFS=$IFS
IFS=/
set -f
set fnord $dstdir
shift
set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

11156
ltmain.sh Normal file
View File

File diff suppressed because it is too large Load Diff

228
mdate-sh Executable file
View File

@ -0,0 +1,228 @@
#!/bin/sh
# Get modification time of a file or directory and pretty-print it.
scriptversion=2015-04-09.19; # UTC
# Copyright (C) 1995-2014 Free Software Foundation, Inc.
# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
fi
case $1 in
'')
echo "$0: No file. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: mdate-sh [--help] [--version] FILE
Pretty-print the modification day of FILE, in the format:
1 January 1970
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "mdate-sh $scriptversion"
exit $?
;;
esac
error ()
{
echo "$0: $1" >&2
exit 1
}
# Prevent date giving response in another language.
LANG=C
export LANG
LC_ALL=C
export LC_ALL
LC_TIME=C
export LC_TIME
# Use UTC to get reproducible result
TZ=UTC
export TZ
# GNU ls changes its time format in response to the TIME_STYLE
# variable. Since we cannot assume 'unset' works, revert this
# variable to its documented default.
if test "${TIME_STYLE+set}" = set; then
TIME_STYLE=posix-long-iso
export TIME_STYLE
fi
save_arg1=$1
# Find out how to get the extended ls output of a file or directory.
if ls -L /dev/null 1>/dev/null 2>&1; then
ls_command='ls -L -l -d'
else
ls_command='ls -l -d'
fi
# Avoid user/group names that might have spaces, when possible.
if ls -n /dev/null 1>/dev/null 2>&1; then
ls_command="$ls_command -n"
fi
# A 'ls -l' line looks as follows on OS/2.
# drwxrwx--- 0 Aug 11 2001 foo
# This differs from Unix, which adds ownership information.
# drwxrwx--- 2 root root 4096 Aug 11 2001 foo
#
# To find the date, we split the line on spaces and iterate on words
# until we find a month. This cannot work with files whose owner is a
# user named "Jan", or "Feb", etc. However, it's unlikely that '/'
# will be owned by a user whose name is a month. So we first look at
# the extended ls output of the root directory to decide how many
# words should be skipped to get the date.
# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
set x`$ls_command /`
# Find which argument is the month.
month=
command=
until test $month
do
test $# -gt 0 || error "failed parsing '$ls_command /' output"
shift
# Add another shift to the command.
command="$command shift;"
case $1 in
Jan) month=January; nummonth=1;;
Feb) month=February; nummonth=2;;
Mar) month=March; nummonth=3;;
Apr) month=April; nummonth=4;;
May) month=May; nummonth=5;;
Jun) month=June; nummonth=6;;
Jul) month=July; nummonth=7;;
Aug) month=August; nummonth=8;;
Sep) month=September; nummonth=9;;
Oct) month=October; nummonth=10;;
Nov) month=November; nummonth=11;;
Dec) month=December; nummonth=12;;
esac
done
test -n "$month" || error "failed parsing '$ls_command /' output"
# Get the extended ls output of the file or directory.
set dummy x`eval "$ls_command \"\\\$save_arg1\""`
# Remove all preceding arguments
eval $command
# Because of the dummy argument above, month is in $2.
#
# On a POSIX system, we should have
#
# $# = 5
# $1 = file size
# $2 = month
# $3 = day
# $4 = year or time
# $5 = filename
#
# On Darwin 7.7.0 and 7.6.0, we have
#
# $# = 4
# $1 = day
# $2 = month
# $3 = year or time
# $4 = filename
# Get the month.
case $2 in
Jan) month=January; nummonth=1;;
Feb) month=February; nummonth=2;;
Mar) month=March; nummonth=3;;
Apr) month=April; nummonth=4;;
May) month=May; nummonth=5;;
Jun) month=June; nummonth=6;;
Jul) month=July; nummonth=7;;
Aug) month=August; nummonth=8;;
Sep) month=September; nummonth=9;;
Oct) month=October; nummonth=10;;
Nov) month=November; nummonth=11;;
Dec) month=December; nummonth=12;;
esac
case $3 in
???*) day=$1;;
*) day=$3; shift;;
esac
# Here we have to deal with the problem that the ls output gives either
# the time of day or the year.
case $3 in
*:*) set `date`; eval year=\$$#
case $2 in
Jan) nummonthtod=1;;
Feb) nummonthtod=2;;
Mar) nummonthtod=3;;
Apr) nummonthtod=4;;
May) nummonthtod=5;;
Jun) nummonthtod=6;;
Jul) nummonthtod=7;;
Aug) nummonthtod=8;;
Sep) nummonthtod=9;;
Oct) nummonthtod=10;;
Nov) nummonthtod=11;;
Dec) nummonthtod=12;;
esac
# For the first six month of the year the time notation can also
# be used for files modified in the last year.
if (expr $nummonth \> $nummonthtod) > /dev/null;
then
year=`expr $year - 1`
fi;;
*) year=$3;;
esac
# The result.
echo $day $month $year
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

215
missing Executable file
View File

@ -0,0 +1,215 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2013-10-28.13; # UTC
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

10079
texinfo.tex Normal file
View File

File diff suppressed because it is too large Load Diff