interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

tcl: fix minor typos and repeated words 

Detected with checkpatch.

Change-Id: Id306928496cf70bbe7ff065bf726bc7dceadce26
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8409
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
This commit is contained in:
Antonio Borneo 2024-07-21 13:04:36 +02:00
parent 13f9f29fa8
commit 4c77f942e1
5 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
tcl/board/at91sam9g20-ek.cfg
View File

@ -43,7 +43,7 @@ proc read_register {register} {
proc at91sam9g20_reset_start { } {
# Make sure that the the jtag is running slow, since there are a number of different ways the board
# Make sure that the jtag is running slow, since there are a number of different ways the board
# can be configured coming into this state that can cause communication problems with the jtag
# adapter. Also since this call can be made following a "reset init" where fast memory accesses
# are enabled, need to temporarily shut this down so that the RSTC_MR register can be written at slower
@ -202,7 +202,7 @@ proc at91sam9g20_reset_init { } {
mww 0xffffea00 0x3
mww 0x20000000 0
# Signal normal mode using the SDRAMC_MR register and follow with a zero value write the the starting
# Signal normal mode using the SDRAMC_MR register and follow with a zero value write the starting
# memory location for the SDRAM.
mww 0xffffea00 0x0

2
tcl/board/netgear-wg102.cfg
View File

@ -27,7 +27,7 @@ $_TARGETNAME configure -event reset-init {
# 0x00003800 - 0x07 << FLASHCTL_WST2_S
# FLASHCTL_AC_8M 0x00060000 - Size of flash
# FLASHCTL_E 0x00080000 - Flash bank enable (added)
# FLASHCTL_WP 0x04000000 - write protect. If used, CFI mode wont work!!
# FLASHCTL_WP 0x04000000 - write protect. If used, CFI mode won't work!!
# FLASHCTL_MWx16 0x10000000 - 16bit mode. Do not use it!!
# FLASHCTL_MWx8 0x00000000 - 8bit mode.
mww 0xb8400000 0x000d3ce1

2
tcl/target/allwinner_v3s.cfg
View File

@ -28,7 +28,7 @@
# UART2_TX PB0 Per default disabled
# UART2_RX PB1 Per default disabled
#
# JTAG is enabled by default after power on on listed JTAG_* pins. So far the
# JTAG is enabled by default after power-on on listed JTAG_* pins. So far the
# boot sequence is:
# Time Action
# 0000ms Power ON

2
tcl/target/ampere_emag.cfg
View File

@ -8,7 +8,7 @@
#
# Configure defaults for target
# Can be overriden in board configuration file
# Can be overridden in board configuration file
#
if { [info exists CHIPNAME] } {

2
tcl/target/icepick.cfg
View File

@ -6,7 +6,7 @@
#
# Utilities for TI ICEpick-C/D used in most TI SoCs
# Details about the ICEPick are available in the the TRM for each SoC
# Details about the ICEPick are available in the TRM for each SoC
# and http://processors.wiki.ti.com/index.php/ICEPICK
# create "constants"