interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

NOR/SPEARSMI: Add comments about SPI 

SMI interface hides the real SPI bus between SPEAr and
external flash.
Added comments to highlight the SPI operation, to help a
future rework in SPI generic and SPEAr specific drivers.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Antonio Borneo 2010-11-17 08:12:45 +08:00 committed by Øyvind Harboe
parent 09c798a144
commit 49f42ab51d
1 changed files with 22 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
src/flash/nor/spearsmi.c
View File

@ -17,6 +17,16 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
/* SPEAr Serial Memory Interface (SMI) controller is a SPI bus controller
* specifically designed for SPI memories.
* Only SPI "mode 3" (CPOL=1 and CPHA=1) is supported.
* Two working modes are available:
* - SW mode: the SPI is controlled by SW. Any custom commands can be sent
* on the bus.
* - HW mode: the SPI but is under SMI control. Memory content is directly
* accessible in CPU memory space. CPU can read, write and execute memory
* content. */
/* ATTENTION:
* To have flash memory mapped in CPU memory space, the SMI controller
* have to be in "HW mode". This requires following constraints:
@ -136,6 +146,9 @@ struct flash_device {
.size_in_bytes = size \
}
/* List below is taken from Linux driver. It is not exhaustive of all the
* possible SPI memories, nor exclusive for SMI. Could be shared with
* other SPI drivers. */
static struct flash_device flash_devices[] = {
/* name, erase_cmd, device_id, pagesize, sectorsize, size_in_bytes */
FLASH_ID("st m25p05", 0xd8, 0x00102020, 0x80, 0x8000, 0x10000),
@ -217,6 +230,9 @@ static int poll_tff(struct target *target, uint32_t io_base, int timeout)
return ERROR_FLASH_OPERATION_FAILED;
}
/* Read the status register of the external SPI flash chip.
* The operation is triggered by setting SMI_RSR bit.
* SMI sends the proper SPI command (0x05) and returns value in SMI_SR */
static int read_status_reg(struct flash_bank *bank, uint32_t *status)
{
struct target *target = bank->target;
@ -235,7 +251,6 @@ static int read_status_reg(struct flash_bank *bank, uint32_t *status)
/* clear transmit finished flag */
SMI_CLEAR_TFF();
/* Check write enabled */
*status = SMI_READ_REG(SMI_SR) & 0x0000ffff;
/* clean-up SMI_CR2 */
@ -268,6 +283,9 @@ static int wait_till_ready(struct flash_bank *bank, int timeout)
return ERROR_FAIL;
}
/* Send "write enable" command to SPI flash chip.
* The operation is triggered by setting SMI_WE bit, and SMI sends
* the proper SPI command (0x06) */
static int smi_write_enable(struct flash_bank *bank)
{
struct target *target = bank->target;
@ -337,7 +355,7 @@ static int smi_erase_sector(struct flash_bank *bank, int sector)
/* clear transmit finished flag */
SMI_CLEAR_TFF();
/* send erase command */
/* send SPI command "block erase" */
cmd = erase_command(spearsmi_info, bank->sectors[sector].offset);
SMI_WRITE_REG(SMI_TR, cmd);
SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4);
@ -554,7 +572,7 @@ static int read_flash_id(struct flash_bank *bank, uint32_t *id)
/* clear transmit finished flag */
SMI_CLEAR_TFF();
/* Require read flash ID */
/* Send SPI command "read ID" */
SMI_WRITE_REG(SMI_TR, SMI_READ_ID);
SMI_WRITE_REG(SMI_CR2,
spearsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1);
@ -565,7 +583,7 @@ static int read_flash_id(struct flash_bank *bank, uint32_t *id)
/* clear transmit finished flag */
SMI_CLEAR_TFF();
/* read ID */
/* read ID from Receive Register */
*id = SMI_READ_REG(SMI_RR) & 0x00ffffff;
return ERROR_OK;
}