Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
This commit is contained in:
Paul Fertser
parent
f342aac084
commit
4307d93eb0
205
NEWS
205
NEWS
|
|
@ -2,232 +2,29 @@ This file includes highlights of the changes made in the OpenOCD
|
|||
source archive release.
|
||||
|
||||
JTAG Layer:
|
||||
* add debug level 4 for verbose I/O debug
|
||||
* bitbang, add read buffer to improve performance
|
||||
* Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver
|
||||
* CMSIS-DAP v2 (USB bulk based) adapter driver
|
||||
* Cypress KitProg adapter driver
|
||||
* FTDI FT232R sync bitbang adapter driver
|
||||
* Linux GPIOD bitbang adapter driver through libgpiod
|
||||
* Mellanox rshim USB or PCIe adapter driver
|
||||
* Nuvoton Nu-Link and Nu-Link2 adapter drivers
|
||||
* NXP IMX GPIO mmap based adapter driver
|
||||
* ST-Link consolidate all versions in single config
|
||||
* ST-Link read properly old USB serial numbers
|
||||
* STLink/V3 support (for ST devices only !)
|
||||
* STM8 SWIM transport
|
||||
* TI XDS110 adapter driver
|
||||
* Xilinx XVC/PCIe adapter driver
|
||||
|
||||
Boundary Scan:
|
||||
|
||||
Target Layer:
|
||||
* 64 bit address support
|
||||
* ARCv2 target support
|
||||
* ARM Cortex-A hypervisor mode support
|
||||
* ARM Cortex-M fast PC sampling support for profiling
|
||||
* ARM generic CTI support
|
||||
* ARM generic mem-ap target support
|
||||
* ARMv7-A MMU tools
|
||||
* ARMv7m traces add TCP stream server
|
||||
* ARMv8 AARCH64 target support and semihosting support
|
||||
* ARMv8 AARCH64 disassembler support through capstone library
|
||||
* ARMv8-M target support
|
||||
* EnSilica eSi-RISC target support, including instruction tracing
|
||||
eSi-Trace support
|
||||
* MIPS64 target support
|
||||
* Motorola SREC S6 record image file support
|
||||
* RISC-V target support
|
||||
* SEGGER Real Time Transfer (RTT) initial support (for single target,
|
||||
Cortex-M only)
|
||||
* ST STM8 target support
|
||||
* Various MIPS32 target improvements
|
||||
|
||||
Flash Layer:
|
||||
* Atheros (ath79) SPI interface support
|
||||
* Atmel atmega128rfa1 support
|
||||
* Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support
|
||||
* Atmel SAMC2?N* support
|
||||
* Cypress PSoC5LP, PSoC6 support
|
||||
* EnSilica eSi-RISC support
|
||||
* Foshan Synwit Tech SWM050 support
|
||||
* Maxim Integrated MAX32XXX support
|
||||
* Nordic Semiconductor nRF51822, nRF52810, nRF52832 support
|
||||
* NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support
|
||||
* Renesas RPC HF support
|
||||
* SH QSPI support
|
||||
* SiFive Freedom E support
|
||||
* Silicon Labs EFR-family, EZR32HG support
|
||||
* ST BlueNRG support
|
||||
* ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM
|
||||
* ST STM32F72x, STM32F4x3, STM32H7xx support
|
||||
* ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support
|
||||
* ST STM32L5x support (non secure mode)
|
||||
* TI CC13xx, CC26xx, CC32xx support
|
||||
* TI MSP432 support
|
||||
* Winner Micro w600 support
|
||||
* Xilinx XCF platform support
|
||||
* Various discrete SPI NOR flashes support
|
||||
|
||||
Board, Target, and Interface Configuration Scripts:
|
||||
* 8devices LIMA board config
|
||||
* Achilles Instant-Development Kit Arria 10 board config
|
||||
* Amazon Kindle 2 and DX board config
|
||||
* Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config
|
||||
* Andes Technology ADP-XC7KFF676 board config
|
||||
* Andes Technology Corvette-F1 board config
|
||||
* ARM Musca A board config
|
||||
* Arty Spartan 7 FPGA board config
|
||||
* Atmel SAMD10 Xplained mini board config
|
||||
* Atmel SAMD11 Xplained Pro board config
|
||||
* Atmel SAM G55 Xplained Pro board config
|
||||
* AVNET UltraZED EG StarterKit board config
|
||||
* Blue Pill STM32F103C8 board config
|
||||
* DP Busblaster v4.1a board config
|
||||
* DPTechnics DPT-Board-v1 board config
|
||||
* Emcraft imx8 SOM BSB board config
|
||||
* Globalscale ESPRESSObin board config
|
||||
* Kasli board config
|
||||
* Kintex Ultrascale XCKU040 board config
|
||||
* Knovative KC-100 board config
|
||||
* LeMaker HiKey board config
|
||||
* Microchip (Atmel) SAME54 Xplained Pro board config
|
||||
* Microchip (Atmel) SAML11 Xplained Pro board config
|
||||
* Nordic module NRF52 board config
|
||||
* Numato Lab Mimas A7 board config
|
||||
* NXP Freedom FRDM-LS1012A board config
|
||||
* NXP IMX7SABRE board config
|
||||
* NXP IMX8MP-EVK board config
|
||||
* NXP MC-IMX8M-EVK board config
|
||||
* QuickLogic QuickFeather board config
|
||||
* Renesas R-Car E2, H2, M2 board config
|
||||
* Renesas R-Car Salvator-X(S) board config
|
||||
* Renesas RZ/A1H GR-Peach board config
|
||||
* Rigado BMD-300 board config
|
||||
* Sayma AMC board config
|
||||
* Sifive e31arty, e51arty, hifive1 board config
|
||||
* ST B-L475E-IOT01A board config
|
||||
* ST BlueNRG idb007v1, idb008v1, idb011v1 board config
|
||||
* ST STM32F412g discovery board config
|
||||
* ST STM32F413h discovery board config
|
||||
* ST STM32F469i discovery board config
|
||||
* ST STM32F7 Nucleo board config
|
||||
* ST STM32F723e discovery board config
|
||||
* ST STM32F746g discovery board config
|
||||
* ST STM32F769i discovery board config
|
||||
* ST STM32H735g discovery board config
|
||||
* ST STM32H743zi Nucleo board config
|
||||
* ST STM32H745i discovery board config
|
||||
* ST STM32H747i discovery board config
|
||||
* ST STM32H750b discovery board config
|
||||
* ST STM32H7b3i discovery board config
|
||||
* ST STM32H7x_dual_qspi board config
|
||||
* ST STM32H7x3i Eval boards config
|
||||
* ST STM32L073 Nucleo board config
|
||||
* ST STM32L476g discovery board config
|
||||
* ST STM32L496g discovery board config
|
||||
* ST STM32L4p5g discovery board config
|
||||
* ST STM32L4r9i discovery board config
|
||||
* ST STM32L5 Nucleo board config
|
||||
* ST STM32MP15x DK2 board config
|
||||
* ST STM32WB Nucleo board config
|
||||
* ST STM8L152R8 Nucleo board config
|
||||
* Synopsys DesignWare ARC EM board config
|
||||
* Synopsys DesignWare ARC HSDK board config
|
||||
* TI BeagleBone family boards config
|
||||
* TI CC13xx, CC26xx, CC32xx LaunchPad board config
|
||||
* TI MSP432 LaunchPad board config
|
||||
* Tocoding Poplar board config
|
||||
* TP-Link WDR4300 board config
|
||||
* Allwinner V3s target config
|
||||
* Andes Technology NDS V5 target config
|
||||
* Atmel atmega128rfa1 target config
|
||||
* ARM corelink SSE-200 target config
|
||||
* Atheros_ar9344 target config
|
||||
* Cypress PSoC5LP, PSoC6 target config
|
||||
* EnSilica eSi-RISC target config
|
||||
* Foshan Synwit Tech SWM050 target config
|
||||
* GigaDevice GD32VF103 target config
|
||||
* Hisilicon Hi3798 target config
|
||||
* Hisilicon Hi6220 target config
|
||||
* Infineon TLE987x target config
|
||||
* Marvell Armada 3700 target config
|
||||
* Maxim Integrated MAX32XXX target config
|
||||
* Mellanox BlueField target config
|
||||
* Microchip (Atmel) SAME5x, SAML1x target config
|
||||
* NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config
|
||||
* NXP Kinetis KE1xZ, KE1xF target config
|
||||
* NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config
|
||||
* Qualcomm QCA4531 target config
|
||||
* QuickLogic EOS S3 target config
|
||||
* Renesas R-Car E2, H2, M2 target config
|
||||
* Renesas R-Car Gen3 target config
|
||||
* Renesas RZ/A1H target config
|
||||
* Rockchip RK3308 target config
|
||||
* ST BlueNRG target config
|
||||
* ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config
|
||||
* ST STM32MP15x target config
|
||||
* ST STM32WBx, STM32WLEx target config
|
||||
* ST STM8L152, S003, S103, S105 target config
|
||||
* Synopsys DesignWare ARC EM target config
|
||||
* Synopsys DesignWare ARC HS Development Kit SoC target config
|
||||
* TI CC13xx, CC26xx, CC32xx target config
|
||||
* TI TNETC4401 target config
|
||||
* Xilinx UltraScale+ target config
|
||||
* Altera 5M570Z (MAXV family) CPLD config
|
||||
* Xilinx Ultrascale, XCF CPLD config
|
||||
* Intel (Altera) Arria10 FPGA config
|
||||
* Cadence SystemVerilog Direct Programming Interface (DPI) interface config
|
||||
* Cypress KitProg interface config
|
||||
* Digilent SMT2 NC interface config
|
||||
* DLN-2 example of Linux GPIOD interface config
|
||||
* FTDI C232HM interface config
|
||||
* HIE JTAG Debugger interface config
|
||||
* In-Circuit's ICprog interface config
|
||||
* isodebug isolated JTAG/SWD+UART interface config
|
||||
* Mellanox rshim USB or PCIe interface config
|
||||
* Nuvoton Nu-Link interface config
|
||||
* NXP IMX GPIO mmap based interface config
|
||||
* Steppenprobe open hardware interface config
|
||||
* TI XDS110 interface config
|
||||
|
||||
Server Layer:
|
||||
* 64 bit address support
|
||||
* default bind to IPv4 localhost
|
||||
* gdb: allow multiple connections
|
||||
* gdb: architecture element support
|
||||
* gdb: vCont, vRun support
|
||||
* telnet: handle Ctrl+A, Ctrl+E and Ctrl+K
|
||||
|
||||
RTOS:
|
||||
* Chromium-EC rtos support
|
||||
* hwthread pseudo rtos support
|
||||
* NuttX rtos support
|
||||
* RIOT rtos support
|
||||
|
||||
Documentation:
|
||||
* Improve STM32 flash driver
|
||||
* Various typo fix and improvements
|
||||
|
||||
Build and Release:
|
||||
* Add libutil to support jimtcl version 0.80
|
||||
* Clang warning fixes
|
||||
* GitHub workflow for Win32 snapshot binaries
|
||||
* Handle Tcl return values consistently
|
||||
* Mitigation for CVE-2018-5704: Prevent some forms of Cross
|
||||
Protocol Scripting attacks
|
||||
* Support for libftdi 1.5
|
||||
* Travis-CI basic support
|
||||
* Update libjaylink to version 0.2.0
|
||||
* Update jimtcl to version 0.79
|
||||
* Use external (optional) library capstone for ARM and AARCH64 disassembly
|
||||
|
||||
|
||||
This release also contains a number of other important functional and
|
||||
cosmetic bugfixes. For more details about what has changed since the
|
||||
last release, see the git repository history:
|
||||
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path=
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
|
||||
|
||||
|
||||
For older NEWS, see the NEWS files associated with each release
|
||||
|
|
|
|||
|
|
@ -0,0 +1,238 @@
|
|||
This file includes highlights of the changes made in the OpenOCD
|
||||
source archive release.
|
||||
|
||||
JTAG Layer:
|
||||
* add debug level 4 for verbose I/O debug
|
||||
* bitbang, add read buffer to improve performance
|
||||
* Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver
|
||||
* CMSIS-DAP v2 (USB bulk based) adapter driver
|
||||
* Cypress KitProg adapter driver
|
||||
* FTDI FT232R sync bitbang adapter driver
|
||||
* Linux GPIOD bitbang adapter driver through libgpiod
|
||||
* Mellanox rshim USB or PCIe adapter driver
|
||||
* Nuvoton Nu-Link and Nu-Link2 adapter drivers
|
||||
* NXP IMX GPIO mmap based adapter driver
|
||||
* ST-Link consolidate all versions in single config
|
||||
* ST-Link read properly old USB serial numbers
|
||||
* STLink/V3 support (for ST devices only !)
|
||||
* STM8 SWIM transport
|
||||
* TI XDS110 adapter driver
|
||||
* Xilinx XVC/PCIe adapter driver
|
||||
|
||||
Boundary Scan:
|
||||
|
||||
Target Layer:
|
||||
* 64 bit address support
|
||||
* ARCv2 target support
|
||||
* ARM Cortex-A hypervisor mode support
|
||||
* ARM Cortex-M fast PC sampling support for profiling
|
||||
* ARM generic CTI support
|
||||
* ARM generic mem-ap target support
|
||||
* ARMv7-A MMU tools
|
||||
* ARMv7m traces add TCP stream server
|
||||
* ARMv8 AARCH64 target support and semihosting support
|
||||
* ARMv8 AARCH64 disassembler support through capstone library
|
||||
* ARMv8-M target support
|
||||
* EnSilica eSi-RISC target support, including instruction tracing
|
||||
eSi-Trace support
|
||||
* MIPS64 target support
|
||||
* Motorola SREC S6 record image file support
|
||||
* RISC-V target support
|
||||
* SEGGER Real Time Transfer (RTT) initial support (for single target,
|
||||
Cortex-M only)
|
||||
* ST STM8 target support
|
||||
* Various MIPS32 target improvements
|
||||
|
||||
Flash Layer:
|
||||
* Atheros (ath79) SPI interface support
|
||||
* Atmel atmega128rfa1 support
|
||||
* Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support
|
||||
* Atmel SAMC2?N* support
|
||||
* Cypress PSoC5LP, PSoC6 support
|
||||
* EnSilica eSi-RISC support
|
||||
* Foshan Synwit Tech SWM050 support
|
||||
* Maxim Integrated MAX32XXX support
|
||||
* Nordic Semiconductor nRF51822, nRF52810, nRF52832 support
|
||||
* NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support
|
||||
* Renesas RPC HF support
|
||||
* SH QSPI support
|
||||
* SiFive Freedom E support
|
||||
* Silicon Labs EFR-family, EZR32HG support
|
||||
* ST BlueNRG support
|
||||
* ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM
|
||||
* ST STM32F72x, STM32F4x3, STM32H7xx support
|
||||
* ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support
|
||||
* ST STM32L5x support (non secure mode)
|
||||
* TI CC13xx, CC26xx, CC32xx support
|
||||
* TI MSP432 support
|
||||
* Winner Micro w600 support
|
||||
* Xilinx XCF platform support
|
||||
* Various discrete SPI NOR flashes support
|
||||
|
||||
Board, Target, and Interface Configuration Scripts:
|
||||
* 8devices LIMA board config
|
||||
* Achilles Instant-Development Kit Arria 10 board config
|
||||
* Amazon Kindle 2 and DX board config
|
||||
* Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config
|
||||
* Andes Technology ADP-XC7KFF676 board config
|
||||
* Andes Technology Corvette-F1 board config
|
||||
* ARM Musca A board config
|
||||
* Arty Spartan 7 FPGA board config
|
||||
* Atmel SAMD10 Xplained mini board config
|
||||
* Atmel SAMD11 Xplained Pro board config
|
||||
* Atmel SAM G55 Xplained Pro board config
|
||||
* AVNET UltraZED EG StarterKit board config
|
||||
* Blue Pill STM32F103C8 board config
|
||||
* DP Busblaster v4.1a board config
|
||||
* DPTechnics DPT-Board-v1 board config
|
||||
* Emcraft imx8 SOM BSB board config
|
||||
* Globalscale ESPRESSObin board config
|
||||
* Kasli board config
|
||||
* Kintex Ultrascale XCKU040 board config
|
||||
* Knovative KC-100 board config
|
||||
* LeMaker HiKey board config
|
||||
* Microchip (Atmel) SAME54 Xplained Pro board config
|
||||
* Microchip (Atmel) SAML11 Xplained Pro board config
|
||||
* Nordic module NRF52 board config
|
||||
* Numato Lab Mimas A7 board config
|
||||
* NXP Freedom FRDM-LS1012A board config
|
||||
* NXP IMX7SABRE board config
|
||||
* NXP IMX8MP-EVK board config
|
||||
* NXP MC-IMX8M-EVK board config
|
||||
* QuickLogic QuickFeather board config
|
||||
* Renesas R-Car E2, H2, M2 board config
|
||||
* Renesas R-Car Salvator-X(S) board config
|
||||
* Renesas RZ/A1H GR-Peach board config
|
||||
* Rigado BMD-300 board config
|
||||
* Sayma AMC board config
|
||||
* Sifive e31arty, e51arty, hifive1 board config
|
||||
* ST B-L475E-IOT01A board config
|
||||
* ST BlueNRG idb007v1, idb008v1, idb011v1 board config
|
||||
* ST STM32F412g discovery board config
|
||||
* ST STM32F413h discovery board config
|
||||
* ST STM32F469i discovery board config
|
||||
* ST STM32F7 Nucleo board config
|
||||
* ST STM32F723e discovery board config
|
||||
* ST STM32F746g discovery board config
|
||||
* ST STM32F769i discovery board config
|
||||
* ST STM32H735g discovery board config
|
||||
* ST STM32H743zi Nucleo board config
|
||||
* ST STM32H745i discovery board config
|
||||
* ST STM32H747i discovery board config
|
||||
* ST STM32H750b discovery board config
|
||||
* ST STM32H7b3i discovery board config
|
||||
* ST STM32H7x_dual_qspi board config
|
||||
* ST STM32H7x3i Eval boards config
|
||||
* ST STM32L073 Nucleo board config
|
||||
* ST STM32L476g discovery board config
|
||||
* ST STM32L496g discovery board config
|
||||
* ST STM32L4p5g discovery board config
|
||||
* ST STM32L4r9i discovery board config
|
||||
* ST STM32L5 Nucleo board config
|
||||
* ST STM32MP15x DK2 board config
|
||||
* ST STM32WB Nucleo board config
|
||||
* ST STM8L152R8 Nucleo board config
|
||||
* Synopsys DesignWare ARC EM board config
|
||||
* Synopsys DesignWare ARC HSDK board config
|
||||
* TI BeagleBone family boards config
|
||||
* TI CC13xx, CC26xx, CC32xx LaunchPad board config
|
||||
* TI MSP432 LaunchPad board config
|
||||
* Tocoding Poplar board config
|
||||
* TP-Link WDR4300 board config
|
||||
* Allwinner V3s target config
|
||||
* Andes Technology NDS V5 target config
|
||||
* Atmel atmega128rfa1 target config
|
||||
* ARM corelink SSE-200 target config
|
||||
* Atheros_ar9344 target config
|
||||
* Cypress PSoC5LP, PSoC6 target config
|
||||
* EnSilica eSi-RISC target config
|
||||
* Foshan Synwit Tech SWM050 target config
|
||||
* GigaDevice GD32VF103 target config
|
||||
* Hisilicon Hi3798 target config
|
||||
* Hisilicon Hi6220 target config
|
||||
* Infineon TLE987x target config
|
||||
* Marvell Armada 3700 target config
|
||||
* Maxim Integrated MAX32XXX target config
|
||||
* Mellanox BlueField target config
|
||||
* Microchip (Atmel) SAME5x, SAML1x target config
|
||||
* NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config
|
||||
* NXP Kinetis KE1xZ, KE1xF target config
|
||||
* NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config
|
||||
* Qualcomm QCA4531 target config
|
||||
* QuickLogic EOS S3 target config
|
||||
* Renesas R-Car E2, H2, M2 target config
|
||||
* Renesas R-Car Gen3 target config
|
||||
* Renesas RZ/A1H target config
|
||||
* Rockchip RK3308 target config
|
||||
* ST BlueNRG target config
|
||||
* ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config
|
||||
* ST STM32MP15x target config
|
||||
* ST STM32WBx, STM32WLEx target config
|
||||
* ST STM8L152, S003, S103, S105 target config
|
||||
* Synopsys DesignWare ARC EM target config
|
||||
* Synopsys DesignWare ARC HS Development Kit SoC target config
|
||||
* TI CC13xx, CC26xx, CC32xx target config
|
||||
* TI TNETC4401 target config
|
||||
* Xilinx UltraScale+ target config
|
||||
* Altera 5M570Z (MAXV family) CPLD config
|
||||
* Xilinx Ultrascale, XCF CPLD config
|
||||
* Intel (Altera) Arria10 FPGA config
|
||||
* Cadence SystemVerilog Direct Programming Interface (DPI) interface config
|
||||
* Cypress KitProg interface config
|
||||
* Digilent SMT2 NC interface config
|
||||
* DLN-2 example of Linux GPIOD interface config
|
||||
* FTDI C232HM interface config
|
||||
* HIE JTAG Debugger interface config
|
||||
* In-Circuit's ICprog interface config
|
||||
* isodebug isolated JTAG/SWD+UART interface config
|
||||
* Mellanox rshim USB or PCIe interface config
|
||||
* Nuvoton Nu-Link interface config
|
||||
* NXP IMX GPIO mmap based interface config
|
||||
* Steppenprobe open hardware interface config
|
||||
* TI XDS110 interface config
|
||||
|
||||
Server Layer:
|
||||
* 64 bit address support
|
||||
* default bind to IPv4 localhost
|
||||
* gdb: allow multiple connections
|
||||
* gdb: architecture element support
|
||||
* gdb: vCont, vRun support
|
||||
* telnet: handle Ctrl+A, Ctrl+E and Ctrl+K
|
||||
|
||||
RTOS:
|
||||
* Chromium-EC rtos support
|
||||
* hwthread pseudo rtos support
|
||||
* NuttX rtos support
|
||||
* RIOT rtos support
|
||||
|
||||
Documentation:
|
||||
* Improve STM32 flash driver
|
||||
* Various typo fix and improvements
|
||||
|
||||
Build and Release:
|
||||
* Add libutil to support jimtcl version 0.80
|
||||
* Clang warning fixes
|
||||
* GitHub workflow for Win32 snapshot binaries
|
||||
* Handle Tcl return values consistently
|
||||
* Mitigation for CVE-2018-5704: Prevent some forms of Cross
|
||||
Protocol Scripting attacks
|
||||
* Support for libftdi 1.5
|
||||
* Travis-CI basic support
|
||||
* Update libjaylink to version 0.2.0
|
||||
* Update jimtcl to version 0.79
|
||||
* Use external (optional) library capstone for ARM and AARCH64 disassembly
|
||||
|
||||
|
||||
This release also contains a number of other important functional and
|
||||
cosmetic bugfixes. For more details about what has changed since the
|
||||
last release, see the git repository history:
|
||||
|
||||
http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path=
|
||||
|
||||
|
||||
For older NEWS, see the NEWS files associated with each release
|
||||
(i.e. NEWS-<version>).
|
||||
|
||||
For more information about contributing test reports, bug fixes, or new
|
||||
features and device support, please read the new Developer Manual (or
|
||||
the BUGS and PATCHES.txt files in the source archive).
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
AC_PREREQ(2.64)
|
||||
AC_INIT([openocd], [0.11.0],
|
||||
AC_INIT([openocd], [0.11.0+dev],
|
||||
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
|
||||
AC_CONFIG_SRCDIR([src/openocd.c])
|
||||
AC_CONFIG_AUX_DIR([.])
|
||||
|
|
|
|||
Loading…
Reference in New Issue