"reset" without arguments now execute a "reset run".

the reset mode argument to the target command is deprecated(ignored w/error message).

git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60

doc/openocd.texi

@@ -516,7 +516,7 @@ Currently, there are no options available for the ep93xx interface.
 @section Target configuration
 
 @itemize @bullet
-@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}>
+@item @b{target} <@var{type}> <@var{endianess}> <@var{JTAG pos}>
 <@var{variant}>
 @cindex target
 Defines a target that should be debugged. Currently supported types are:
@@ -538,29 +538,6 @@ target board
 
 Endianess may be @option{little} or @option{big}.
 
-The reset_mode specifies what should happen to the target when a reset occurs:
-@itemize @minus
-@item @b{reset_halt}
-@cindex reset_halt
-Immediately request a target halt after reset. This allows targets to be debugged
-from the very first instruction. This is only possible with targets and JTAG
-interfaces that correctly implement the reset signals.
-@item @b{reset_init}
-@cindex reset_init
-Similar to @option{reset_halt}, but executes the script file defined to handle the
-'reset' event for the target. Like @option{reset_halt} this only works with
-correct reset implementations.
-@item @b{reset_run}
-@cindex reset_run
-Simply let the target run after a reset.
-@item @b{run_and_halt}
-@cindex run_and_halt
-Let the target run for some time (default: 1s), and then request halt.
-@item @b{run_and_init}
-@cindex run_and_init
-A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed
-to run for some time, then halted, and the @option{reset} event script is executed. 
-@end itemize
 
 On JTAG interfaces / targets where system reset and test-logic reset can't be driven
 completely independent (like the LPC2000 series), or where the JTAG interface is
@@ -591,7 +568,7 @@ a working_area that doesn't need to be backed up, as performing a backup slows d
 
 @subsection arm7tdmi options
 @cindex arm7tdmi options
-target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}>
+target arm7tdmi <@var{endianess}> <@var{jtag#}>
 The arm7tdmi target definition requires at least one additional argument, specifying
 the position of the target in the JTAG daisy-chain. The first JTAG device is number 0.
 The optional [@var{variant}] parameter has been removed in recent versions.
@@ -829,12 +806,15 @@ OpenOCD will wait 5 seconds for the target to resume.
 @cindex step
 Single-step the target at its current code position, or at an optional address. 
 
+
 @item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt}
 |@option{run_and_init}]
 @cindex reset
 Perform a hard-reset. The optional parameter specifies what should happen after the reset.
 This optional parameter overrides the setting specified in the configuration file,
 making the new behaviour the default for the @option{reset} command.
+
+With no arguments a "reset run" is executed
 @itemize @minus
 @item @b{run}
 @cindex reset run

src/target/target.c

@@ -302,6 +302,8 @@ int target_process_reset(struct command_context_s *cmd_ctx)
 	if ((retval = jtag_init_reset(cmd_ctx)) != ERROR_OK)
 		return retval;
 	
+	keep_alive(); /* we might be running on a very slow JTAG clk */
+	
 	/* First time this is executed after launching OpenOCD, it will read out 
 	 * the type of CPU, etc. and init Embedded ICE registers in host
 	 * memory. 
@@ -315,6 +317,8 @@ int target_process_reset(struct command_context_s *cmd_ctx)
 	if ((retval = target_examine(cmd_ctx)) != ERROR_OK)
 		return retval;
 	
+	keep_alive(); /* we might be running on a very slow JTAG clk */
+	
 	/* prepare reset_halt where necessary */
 	target = targets;
 	while (target)
@@ -949,6 +953,7 @@ int target_register_commands(struct command_context_s *cmd_ctx)
 	register_command(cmd_ctx, NULL, "virt2phys", handle_virt2phys_command, COMMAND_ANY, "virt2phys <virtual address>");
 	register_command(cmd_ctx, NULL, "profile", handle_profile_command, COMMAND_EXEC, "PRELIMINARY! - profile <seconds> <gmon.out>");
 
+
 	/* script procedures */
 	register_jim(cmd_ctx, "openocd_mem2array", jim_mem2array, "read memory and return as a TCL array for script processing");
 	register_jim(cmd_ctx, "openocd_array2mem", jim_array2mem, "convert a TCL array to memory locations and write the values");
@@ -1413,18 +1418,26 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a
 					return ERROR_COMMAND_SYNTAX_ERROR;
 				}
 				
-				/* what to do on a target reset */
-				(*last_target_p)->reset_mode = RESET_INIT; /* default */
 				if (strcmp(args[2], "reset_halt") == 0)
-					(*last_target_p)->reset_mode = RESET_HALT;
+				{
+					LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+				}
 				else if (strcmp(args[2], "reset_run") == 0)
-					(*last_target_p)->reset_mode = RESET_RUN;
+				{
+					LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+				}
 				else if (strcmp(args[2], "reset_init") == 0)
-					(*last_target_p)->reset_mode = RESET_INIT;
+				{
+					LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+				}
 				else if (strcmp(args[2], "run_and_halt") == 0)
-					(*last_target_p)->reset_mode = RESET_RUN_AND_HALT;
+				{
+					LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+				}
 				else if (strcmp(args[2], "run_and_init") == 0)
-					(*last_target_p)->reset_mode = RESET_RUN_AND_INIT;
+				{
+					LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+				}
 				else
 				{
 					/* Kludge! we want to make this reset arg optional while remaining compatible! */
@@ -1800,8 +1813,7 @@ int handle_soft_reset_halt_command(struct command_context_s *cmd_ctx, char *cmd,
 int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
 	target_t *target = get_current_target(cmd_ctx);
-	enum target_reset_mode reset_mode = target->reset_mode;
+	enum target_reset_mode reset_mode = RESET_RUN;
-	enum target_reset_mode save = target->reset_mode;
 	
 	LOG_DEBUG("-");
 	
@@ -1842,9 +1854,6 @@ int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **ar
 	/* reset *all* targets */
 	target_process_reset(cmd_ctx);
 	
-	/* Restore default reset mode for this target */
-    target->reset_mode = save;
-	
 	return ERROR_OK;
 }