interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

TCL: fix non TCL comments 

End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Antonio Borneo 2010-12-19 01:22:53 +08:00 committed by Øyvind Harboe
parent af3f77a177
commit 30da7c67ce
28 changed files with 724 additions and 724 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
tcl/board/at91sam9g20-ek.cfg
View File

@ -80,10 +80,10 @@ proc at91sam9g20_reset_start { } {
# jtag speed without causing GDB keep alive problem.
arm7_9 fast_memory_access disable
adapter_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow.
halt # Make sure processor is halted, or error will result in following steps.
adapter_khz 2 ;# Slow-speed oscillator enabled at reset, so run jtag speed slow.
halt ;# Make sure processor is halted, or error will result in following steps.
wait_halt 10000
mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset.
mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset.
}
proc at91sam9g20_reset_init { } {
@ -97,7 +97,7 @@ proc at91sam9g20_reset_init { } {
# means the master clock (MCLK) must be at or below 133 MHz or timing errors will occur. The processor
# core can operate up to 400 MHz and therefore PCLK must be at or below this to function properly.
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog.
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog.
# Enable the main 18.432 MHz oscillator in CKGR_MOR register.
# Wait for MOSCS in PMC_SR to assert indicating oscillator is again stable after change to CKGR_MOR.
@ -155,11 +155,11 @@ proc at91sam9g20_reset_init { } {
# a number of registers. The first step involves setting up the general I/O pins on the processor
# to be able to interface and support the external memory.
mww 0xfffffc10 0x00000010 # PMC_PCER : enable PIOC clock
mww 0xfffff800 0x00006000 # PIOC_PER : enable PIO function for 13(RDY/~BSY) and 14(~CS)
mww 0xfffff810 0x00004000 # PIOC_OER : enable output on 14
mww 0xfffff814 0x00002000 # PIOC_ODR : disable output on 13
mww 0xfffff830 0x00004000 # PIOC_SODR : set 14 to disable NAND
mww 0xfffffc10 0x00000010 ;# PMC_PCER : enable PIOC clock
mww 0xfffff800 0x00006000 ;# PIOC_PER : enable PIO function for 13(RDY/~BSY) and 14(~CS)
mww 0xfffff810 0x00004000 ;# PIOC_OER : enable output on 14
mww 0xfffff814 0x00002000 ;# PIOC_ODR : disable output on 13
mww 0xfffff830 0x00004000 ;# PIOC_SODR : set 14 to disable NAND
# The exact physical timing characteristics for the memory type used on the current board
# (MT29F2G08AACWP) can be established by setting four registers in order: SMC_SETUP3,
@ -167,13 +167,13 @@ proc at91sam9g20_reset_init { } {
# is a little tedious to do here. If you have questions about how to do this, Atmel has
# a decent application note #6255B that covers this process.
mww 0xffffec30 0x00020002 # SMC_SETUP3 : 2 clock cycle setup for NRD and NWE
mww 0xffffec34 0x04040404 # SMC_PULSE3 : 4 clock cycle pulse for all signals
mww 0xffffec38 0x00070006 # SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle
mww 0xffffec3C 0x00020003 # SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW,
mww 0xffffec30 0x00020002 ;# SMC_SETUP3 : 2 clock cycle setup for NRD and NWE
mww 0xffffec34 0x04040404 ;# SMC_PULSE3 : 4 clock cycle pulse for all signals
mww 0xffffec38 0x00070006 ;# SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle
mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW,
mww 0xffffe800 0x00000001 # ECC_CR : reset the ECC parity registers
mww 0xffffe804 0x00000002 # ECC_MR : page size is 2112 words (word is 8 bits)
mww 0xffffe800 0x00000001 ;# ECC_CR : reset the ECC parity registers
mww 0xffffe804 0x00000002 ;# ECC_MR : page size is 2112 words (word is 8 bits)
# Identify NandFlash bank 0.

44
tcl/board/atmel_at91sam9260-ek.cfg
View File

@ -28,36 +28,36 @@ $_TARGETNAME configure -event reset-start {
}
$_TARGETNAME configure -event reset-init {
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
sleep 10 # wait 10 ms
mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198.656 MHz
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2)
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected (99.328 MHz)
sleep 10 # wait 10 ms
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
sleep 10 ;# wait 10 ms
mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198.656 MHz
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2)
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected (99.328 MHz)
sleep 10 ;# wait 10 ms
# Increase JTAG Speed to 6 MHz if RCLK is not supported
jtag_rclk 6000
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31
mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31
mww 0xffffef1c 0x00010002 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffef1c 0x00010002 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks)
mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks)
mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
@ -73,9 +73,9 @@ $_TARGETNAME configure -event reset-init {
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode
mww 0x20000000 0
mww 0xffffea04 0x2b6 # SDRAMC_TR : Set refresh timer count to 7us
mww 0xffffea04 0x2b6 ;# SDRAMC_TR : Set refresh timer count to 7us
}

44
tcl/board/atmel_at91sam9rl-ek.cfg
View File

@ -22,36 +22,36 @@ $_TARGETNAME configure -event reset-start {
}
$_TARGETNAME configure -event reset-init {
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
sleep 10 # wait 10 ms
mww 0xfffffc28 0x2031bf03 # CKGR_PLLR: Set PLL Register for 200 MHz
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2)
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLL is selected (100 MHz)
sleep 10 # wait 10 ms
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
sleep 10 ;# wait 10 ms
mww 0xfffffc28 0x2031bf03 ;# CKGR_PLLR: Set PLL Register for 200 MHz
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2)
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLL is selected (100 MHz)
sleep 10 ;# wait 10 ms
# Increase JTAG Speed to 6 MHz if RCLK is not supported
jtag_rclk 6000
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
mww 0xfffff670 0xffff0000 # PIO_ASR : Select peripheral function for D16..D31 (PIOB)
mww 0xfffff604 0xffff0000 # PIO_PDR : Disable PIO function for D16..D31 (PIOB)
mww 0xfffff670 0xffff0000 ;# PIO_ASR : Select peripheral function for D16..D31 (PIOB)
mww 0xfffff604 0xffff0000 ;# PIO_PDR : Disable PIO function for D16..D31 (PIOB)
mww 0xffffef20 0x00010002 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffef20 0x00010002 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks)
mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks)
mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
@ -67,9 +67,9 @@ $_TARGETNAME configure -event reset-init {
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode
mww 0x20000000 0
mww 0xffffea04 0x2b6 # SDRAMC_TR : Set refresh timer count to 7us
mww 0xffffea04 0x2b6 ;# SDRAMC_TR : Set refresh timer count to 7us
}

58
tcl/board/digi_connectcore_wi-9c.cfg
View File

@ -48,31 +48,31 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA
$_TARGETNAME configure -event reset-init {
mww 0x90600104 0x33313333
mww 0xA0700000 0x00000001 # Enable the memory controller.
mww 0xA0700024 0x00000006 # Set the refresh counter 6
mww 0xA0700028 0x00000001 #
mww 0xA0700030 0x00000001 # Set the precharge period
mww 0xA0700034 0x00000004 # Active to precharge command period is 16 clock cycles
mww 0xA070003C 0x00000001 # tAPR
mww 0xA0700040 0x00000005 # tDAL
mww 0xA0700044 0x00000001 # tWR
mww 0xA0700048 0x00000006 # tRC 32 clock cycles
mww 0xA070004C 0x00000006 # tRFC 32 clock cycles
mww 0xA0700054 0x00000001 # tRRD
mww 0xA0700058 0x00000001 # tMRD
mww 0xA0700100 0x00004280 # Dynamic Config 0 (cs4)
mww 0xA0700120 0x00004280 # Dynamic Config 1 (cs5)
mww 0xA0700140 0x00004280 # Dynamic Config 2 (cs6)
mww 0xA0700160 0x00004280 # Dynamic Config 3 (cs7)
mww 0xA0700000 0x00000001 ;# Enable the memory controller.
mww 0xA0700024 0x00000006 ;# Set the refresh counter 6
mww 0xA0700028 0x00000001 ;#
mww 0xA0700030 0x00000001 ;# Set the precharge period
mww 0xA0700034 0x00000004 ;# Active to precharge command period is 16 clock cycles
mww 0xA070003C 0x00000001 ;# tAPR
mww 0xA0700040 0x00000005 ;# tDAL
mww 0xA0700044 0x00000001 ;# tWR
mww 0xA0700048 0x00000006 ;# tRC 32 clock cycles
mww 0xA070004C 0x00000006 ;# tRFC 32 clock cycles
mww 0xA0700054 0x00000001 ;# tRRD
mww 0xA0700058 0x00000001 ;# tMRD
mww 0xA0700100 0x00004280 ;# Dynamic Config 0 (cs4)
mww 0xA0700120 0x00004280 ;# Dynamic Config 1 (cs5)
mww 0xA0700140 0x00004280 ;# Dynamic Config 2 (cs6)
mww 0xA0700160 0x00004280 ;# Dynamic Config 3 (cs7)
#
mww 0xA0700104 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700124 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700144 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700164 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700104 0x00000203 ;# CAS latency is 2 at 100 MHz
mww 0xA0700124 0x00000203 ;# CAS latency is 2 at 100 MHz
mww 0xA0700144 0x00000203 ;# CAS latency is 2 at 100 MHz
mww 0xA0700164 0x00000203 ;# CAS latency is 2 at 100 MHz
#
mww 0xA0700020 0x00000103 # issue SDRAM PALL command
mww 0xA0700020 0x00000103 ;# issue SDRAM PALL command
#
mww 0xA0700024 0x00000001 # Set the refresh counter to be as small as possible
mww 0xA0700024 0x00000001 ;# Set the refresh counter to be as small as possible
#
# Add some dummy writes to give the SDRAM time to settle, it needs two
# AHB clock cycles, here we poke in the debugger flag, this lets
@ -89,19 +89,19 @@ $_TARGETNAME configure -event reset-init {
mdw 0xA0900000
mdw 0xA0900000
#
mww 0xA0700024 0x00000030 # Set the refresh counter to 30
mww 0xA0700020 0x00000083 # Issue SDRAM MODE command
mww 0xA0700024 0x00000030 ;# Set the refresh counter to 30
mww 0xA0700020 0x00000083 ;# Issue SDRAM MODE command
#
# Next we perform a read of RAM.
# mw = move word.
mdw 0x00022000
# mw 0x00022000:P, r3 # 22000 for cas2 latency, 32000 for cas 3
#
mww 0xA0700020 0x00000003 # issue SDRAM NORMAL command
mww 0xA0700100 0x00084280 # Enable buffer access
mww 0xA0700120 0x00084280 # Enable buffer access
mww 0xA0700140 0x00084280 # Enable buffer access
mww 0xA0700160 0x00084280 # Enable buffer access
mww 0xA0700020 0x00000003 ;# issue SDRAM NORMAL command
mww 0xA0700100 0x00084280 ;# Enable buffer access
mww 0xA0700120 0x00084280 ;# Enable buffer access
mww 0xA0700140 0x00084280 ;# Enable buffer access
mww 0xA0700160 0x00084280 ;# Enable buffer access
#Set byte lane state (static mem 1)"
mww 0xA0700220 0x00000082

42
tcl/board/eir.cfg
View File

@ -30,60 +30,60 @@ $_TARGETNAME configure -event reset-init {
#
# Enable SDRAM control at PIO A.
mww 0xfffff474 0x3f800000 # PIO_BSR_OFF
mww 0xfffff404 0x3f800000 # PIO_PDR_OFF
mww 0xfffff474 0x3f800000 ;# PIO_BSR_OFF
mww 0xfffff404 0x3f800000 ;# PIO_PDR_OFF
# Enable address bus (A0, A2-A11, A13-A17) at PIO B
mww 0xfffff674 0x0003effd # PIO_BSR_OFF
mww 0xfffff604 0x0003effd # PIO_PDR_OFF
mww 0xfffff674 0x0003effd ;# PIO_BSR_OFF
mww 0xfffff604 0x0003effd ;# PIO_PDR_OFF
# Enable 16 bit data bus at PIO C
mww 0xfffff870 0x0000ffff # PIO_ASR_OFF
mww 0xfffff804 0x0000ffff # PIO_PDR_OFF
mww 0xfffff870 0x0000ffff ;# PIO_ASR_OFF
mww 0xfffff804 0x0000ffff ;# PIO_PDR_OFF
# Enable SDRAM chip select
mww 0xffffff80 0x00000002 # EBI_CSA_OFF
mww 0xffffff80 0x00000002 ;# EBI_CSA_OFF
# Set SDRAM characteristics in configuration register.
# Hard coded values for MT48LC32M16A2 with 48MHz CPU.
mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF
mww 0xffffffb8 0x2192215a ;# SDRAMC_CR_OFF
sleep 10
# Issue 16 bit SDRAM command: NOP
mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000011 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
# Issue 16 bit SDRAM command: Precharge all
mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000012 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
# Issue 8 auto-refresh cycles
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000000
# Issue 16 bit SDRAM command: Set mode register
mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000013 ;# SDRAMC_MR_OFF
mww 0x20000014 0xcafedede
# Set refresh rate count ???
mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF
mww 0xffffffb4 0x00000013 ;# SDRAMC_TR_OFF
# Issue 16 bit SDRAM command: Normal mode
mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF
mww 0xffffffb0 0x00000010 ;# SDRAMC_MR_OFF
mww 0x20000000 0x00000180
#

112
tcl/board/embedded-artists_lpc2478-32.cfg
View File

@ -42,28 +42,28 @@ proc enable_pll {} {
if {[expr [read_register 0xE01FC080] & 0x03] == 3} {
# Disconnect it, but leave it enabled
# (This MUST be done in two steps)
mww 0xE01FC080 0x00000001 # PLLCON: disconnect PLL
mww 0xE01FC08C 0x000000AA # PLLFEED
mww 0xE01FC08C 0x00000055 # PLLFEED
mww 0xE01FC080 0x00000001 ;# PLLCON: disconnect PLL
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}
# Disable PLL (as it might already be enabled at this time!)
mww 0xE01FC080 0x00000000 # PLLCON: disable PLL
mww 0xE01FC08C 0x000000AA # PLLFEED
mww 0xE01FC08C 0x00000055 # PLLFEED
mww 0xE01FC080 0x00000000 ;# PLLCON: disable PLL
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
# Setup PLL to generate 288 MHz from internal RC oscillator
mww 0xE01FC10C 0x00000000 # CLKSRCSEL: IRC
mww 0xE01FC084 0x00000023 # PLLCFG: N=1, M=36
mww 0xE01FC08C 0x000000AA # PLLFEED
mww 0xE01FC08C 0x00000055 # PLLFEED
mww 0xE01FC080 0x00000001 # PLLCON: enable PLL
mww 0xE01FC08C 0x000000AA # PLLFEED
mww 0xE01FC08C 0x00000055 # PLLFEED
mww 0xE01FC10C 0x00000000 ;# CLKSRCSEL: IRC
mww 0xE01FC084 0x00000023 ;# PLLCFG: N=1, M=36
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
mww 0xE01FC080 0x00000001 ;# PLLCON: enable PLL
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
sleep 100
mww 0xE01FC104 0x00000003 # CCLKCFG: divide by 4 (72 MHz)
mww 0xE01FC080 0x00000003 # PLLCON: connect PLL
mww 0xE01FC08C 0x000000AA # PLLFEED
mww 0xE01FC08C 0x00000055 # PLLFEED
mww 0xE01FC104 0x00000003 ;# CCLKCFG: divide by 4 (72 MHz)
mww 0xE01FC080 0x00000003 ;# PLLCON: connect PLL
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}
@ -78,71 +78,71 @@ $_TARGETNAME configure -event reset-start {
$_TARGETNAME configure -event reset-init {
arm core_state arm
arm7_9 dcc_downloads enable # Speed up downloads by using DCC transfer
arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer
arm7_9 fast_memory_access enable
# Peripheral clocks
mww 0xE01FC0C4 0x04280FFE # PCONP: (reset value)
mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value)
# Map the user flash to the vector table area (0x00...0x3F)
mww 0xE01FC040 0x00000001 # MEMMAP: User flash
mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash
# Memory accelerator module
mww 0xE01FC004 0x00000003 # MAMTIM: 3 clock cycles
mww 0xE01FC000 0x00000002 # MAMCR: fully enabled
mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles
mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled
# Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0)
mww 0xE002C014 0x55010115 # PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
# P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0,
# P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3
mww 0xE002C018 0x55555555 # PINSEL6: P3.0...P3.15=D0...D15
mww 0xE002C01C 0x55555555 # PINSEL7: P3.16...P3.31=D16...D31
mww 0xE002C020 0x55555555 # PINSEL8: P4.0...P4.15=A0...A15
mww 0xE002C024 0x50051555 # PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15
mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31
mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15
mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
# P4.25=WE, P4.30=CS0, P4.31=CS1
mww 0xFFE08000 0x00000001 # EMCControl: Enable EMC
mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC
# Start PLL, then use faster JTAG clock
enable_pll
jtag_rclk 3000
# 16-bit flash @ CS0 (SST39VF3201-70)
mww 0xFFE08200 0x00080081 # EMCStaticConfig0: 16 bit, PB=1, buffers on
mww 0xFFE08204 0x00000000 # EMCStaticWaitWen0
mww 0xFFE08208 0x00000000 # EMCStaticWaitOen0
mww 0xFFE0820C 0x00000005 # EMCStaticWaitRd0
mww 0xFFE08210 0x00000005 # EMCStaticWaitPage0
mww 0xFFE08214 0x00000003 # EMCStaticWaitWr0
mww 0xFFE08218 0x00000001 # EMCStaticWaitTurn0
mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on
mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0
mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0
mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0
mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0
mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0
mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0
# 8-bit NAND @ CS1
# TODO
# 32-bit SDRAM @ DYCS0 (K4M563233G-HN75)
mww 0xFFE08028 0x00000001 # EMCDynamicReadConfig
mww 0xFFE08030 0x00000001 # EMCDynamicRP
mww 0xFFE08034 0x00000003 # EMCDynamicRAS
mww 0xFFE08038 0x00000005 # EMCDynamicSREX
mww 0xFFE0803C 0x00000001 # EMCDynamicAPR
mww 0xFFE08040 0x00000005 # EMCDynamicDAL
mww 0xFFE08044 0x00000001 # EMCDynamicWR
mww 0xFFE08048 0x00000005 # EMCDynamicRC
mww 0xFFE0804C 0x00000005 # EMCDynamicRFC
mww 0xFFE08050 0x00000005 # EMCDynamicXSR
mww 0xFFE08054 0x00000001 # EMCDynamicRRD
mww 0xFFE08058 0x00000001 # EMCDynamicMRD
mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig
mww 0xFFE08030 0x00000001 ;# EMCDynamicRP
mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS
mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX
mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR
mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL
mww 0xFFE08044 0x00000001 ;# EMCDynamicWR
mww 0xFFE08048 0x00000005 ;# EMCDynamicRC
mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC
mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR
mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD
mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD
#
mww 0xFFE08104 0x00000202 # EMCDynamicRasCas0
mww 0xFFE08100 0x00005488 # EMCDynamicConfig0
mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0
mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0
sleep 100
mww 0xFFE08020 0x00000183 # EMCDynamicControl: Clock on continuously, NOP
mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP
sleep 10
mww 0xFFE08020 0x00000103 # EMCDynamicControl: PRECHARGE-ALL
mww 0xFFE08024 0x00000046 # EMCDynamicRefresh
mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL
mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh
sleep 100
mww 0xFFE08020 0x00000083 # EMCDynamicControl: MODE
mdw 0xA0011000 1 # Set SDRAM mode register
mww 0xFFE08020 0x00000000 # EMCDynamicControl: NORMAL
mww 0xFFE08100 0x00085488 # EMCDynamicConfig0: Enable buffers
mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE
mdw 0xA0011000 1 ;# Set SDRAM mode register
mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL
mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers
}

118
tcl/board/hitex_lpc2929.cfg
View File

@ -34,73 +34,73 @@ flash bank $_FLASHNAME cfi 0x5C000000 0x400000 2 2 $_TARGETNAME jedec_probe
$_TARGETNAME configure -event reset-init {
# Flash
mww 0x20200010 0x00000007 # FBWST: 7 wait states, not chached
mww 0x20200010 0x00000007 ;# FBWST: 7 wait states, not chached
# Use PLL
mww 0xFFFF8020 0x00000001 # XTAL_OSC_CONTROL: enable, 1-20 MHz
mww 0xFFFF8070 0x01000000 # SYS_CLK_CONF: Crystal
mww 0xFFFF8028 0x00000005 # PLL: (power down)
mww 0xFFFF8028 0x01060004 # PLL: M=7, 2P=2 (power up)
mww 0xFFFF8020 0x00000001 ;# XTAL_OSC_CONTROL: enable, 1-20 MHz
mww 0xFFFF8070 0x01000000 ;# SYS_CLK_CONF: Crystal
mww 0xFFFF8028 0x00000005 ;# PLL: (power down)
mww 0xFFFF8028 0x01060004 ;# PLL: M=7, 2P=2 (power up)
# --> f=112 MHz, fcco=224 MHz
sleep 100
mww 0xFFFF8070 0x02000000 # SYS_CLK_CONF: PLL
mww 0xFFFF8070 0x02000000 ;# SYS_CLK_CONF: PLL
# Increase JTAG speed
adapter_khz 6000
# Enable external memory bus (16-bit SRAM at CS6, 16-bit flash at CS7)
mww 0xE0001138 0x0000001F # P1.14 = D0
mww 0xE000113C 0x0000001F # P1.15 = D1
mww 0xE0001140 0x0000001F # P1.16 = D2
mww 0xE0001144 0x0000001F # P1.17 = D3
mww 0xE0001148 0x0000001F # P1.18 = D4
mww 0xE000114C 0x0000001F # P1.19 = D5
mww 0xE0001150 0x0000001F # P1.20 = D6
mww 0xE0001154 0x0000001F # P1.21 = D7
mww 0xE0001200 0x0000001F # P2.0 = D8
mww 0xE0001204 0x0000001F # P2.1 = D9
mww 0xE0001208 0x0000001F # P2.2 = D10
mww 0xE000120C 0x0000001F # P2.3 = D11
mww 0xE0001210 0x0000001F # P2.4 = D12
mww 0xE0001214 0x0000001F # P2.5 = D13
mww 0xE0001218 0x0000001F # P2.6 = D14
mww 0xE000121C 0x0000001F # P2.7 = D15
mww 0xE0001104 0x00000007 # P1.1 = A1
mww 0xE0001108 0x00000007 # P1.2 = A2
mww 0xE000110C 0x00000007 # P1.3 = A3
mww 0xE0001110 0x00000007 # P1.4 = A4
mww 0xE0001114 0x00000007 # P1.5 = A5
mww 0xE0001118 0x00000007 # P1.6 = A6
mww 0xE000111C 0x00000007 # P1.7 = A7
mww 0xE0001028 0x00000007 # P0.10 = A8
mww 0xE000102C 0x00000007 # P0.11 = A9
mww 0xE0001030 0x00000007 # P0.12 = A10
mww 0xE0001034 0x00000007 # P0.13 = A11
mww 0xE0001038 0x00000007 # P0.14 = A12
mww 0xE000103C 0x00000007 # P0.15 = A13
mww 0xE0001048 0x00000007 # P0.18 = A14
mww 0xE000104C 0x00000007 # P0.19 = A15
mww 0xE0001050 0x00000007 # P0.20 = A16
mww 0xE0001054 0x00000007 # P0.21 = A17
mww 0xE0001058 0x00000007 # P0.22 = A18
mww 0xE000105C 0x00000007 # P0.23 = A19
mww 0xE0001238 0x00000007 # P2.14 = BLS0
mww 0xE000123C 0x00000007 # P2.15 = BLS1
mww 0xE0001300 0x00000007 # P3.0 = CS6
mww 0xE0001304 0x00000007 # P3.1 = CS7
mww 0xE0001130 0x00000007 # P1.12 = OE_N
mww 0xE0001134 0x00000007 # P1.13 = WE_N
mww 0x600000BC 0x00000041 # Bank6 16-bit mode, RBLE=1
mww 0x600000B4 0x00000000 # Bank6 WSTOEN=0
mww 0x600000AC 0x00000005 # Bank6 WST1=5
mww 0x600000B8 0x00000001 # Bank6 WSTWEN=1
mww 0x600000B0 0x00000006 # Bank6 WST2=6
mww 0x600000A8 0x00000002 # Bank6 IDCY=2
mww 0x600000D8 0x00000041 # Bank7 16-bit mode, RBLE=1
mww 0x600000D0 0x00000000 # Bank7 WSTOEN=0
mww 0x600000C8 0x0000000A # Bank7 WST1=10
mww 0x600000D4 0x00000001 # Bank7 WSTWEN=1
mww 0x600000CC 0x0000000C # Bank7 WST2=8
mww 0x600000C4 0x00000002 # Bank7 IDCY=2
mww 0xE0001138 0x0000001F ;# P1.14 = D0
mww 0xE000113C 0x0000001F ;# P1.15 = D1
mww 0xE0001140 0x0000001F ;# P1.16 = D2
mww 0xE0001144 0x0000001F ;# P1.17 = D3
mww 0xE0001148 0x0000001F ;# P1.18 = D4
mww 0xE000114C 0x0000001F ;# P1.19 = D5
mww 0xE0001150 0x0000001F ;# P1.20 = D6
mww 0xE0001154 0x0000001F ;# P1.21 = D7
mww 0xE0001200 0x0000001F ;# P2.0 = D8
mww 0xE0001204 0x0000001F ;# P2.1 = D9
mww 0xE0001208 0x0000001F ;# P2.2 = D10
mww 0xE000120C 0x0000001F ;# P2.3 = D11
mww 0xE0001210 0x0000001F ;# P2.4 = D12
mww 0xE0001214 0x0000001F ;# P2.5 = D13
mww 0xE0001218 0x0000001F ;# P2.6 = D14
mww 0xE000121C 0x0000001F ;# P2.7 = D15
mww 0xE0001104 0x00000007 ;# P1.1 = A1
mww 0xE0001108 0x00000007 ;# P1.2 = A2
mww 0xE000110C 0x00000007 ;# P1.3 = A3
mww 0xE0001110 0x00000007 ;# P1.4 = A4
mww 0xE0001114 0x00000007 ;# P1.5 = A5
mww 0xE0001118 0x00000007 ;# P1.6 = A6
mww 0xE000111C 0x00000007 ;# P1.7 = A7
mww 0xE0001028 0x00000007 ;# P0.10 = A8
mww 0xE000102C 0x00000007 ;# P0.11 = A9
mww 0xE0001030 0x00000007 ;# P0.12 = A10
mww 0xE0001034 0x00000007 ;# P0.13 = A11
mww 0xE0001038 0x00000007 ;# P0.14 = A12
mww 0xE000103C 0x00000007 ;# P0.15 = A13
mww 0xE0001048 0x00000007 ;# P0.18 = A14
mww 0xE000104C 0x00000007 ;# P0.19 = A15
mww 0xE0001050 0x00000007 ;# P0.20 = A16
mww 0xE0001054 0x00000007 ;# P0.21 = A17
mww 0xE0001058 0x00000007 ;# P0.22 = A18
mww 0xE000105C 0x00000007 ;# P0.23 = A19
mww 0xE0001238 0x00000007 ;# P2.14 = BLS0
mww 0xE000123C 0x00000007 ;# P2.15 = BLS1
mww 0xE0001300 0x00000007 ;# P3.0 = CS6
mww 0xE0001304 0x00000007 ;# P3.1 = CS7
mww 0xE0001130 0x00000007 ;# P1.12 = OE_N
mww 0xE0001134 0x00000007 ;# P1.13 = WE_N
mww 0x600000BC 0x00000041 ;# Bank6 16-bit mode, RBLE=1
mww 0x600000B4 0x00000000 ;# Bank6 WSTOEN=0
mww 0x600000AC 0x00000005 ;# Bank6 WST1=5
mww 0x600000B8 0x00000001 ;# Bank6 WSTWEN=1
mww 0x600000B0 0x00000006 ;# Bank6 WST2=6
mww 0x600000A8 0x00000002 ;# Bank6 IDCY=2
mww 0x600000D8 0x00000041 ;# Bank7 16-bit mode, RBLE=1
mww 0x600000D0 0x00000000 ;# Bank7 WSTOEN=0
mww 0x600000C8 0x0000000A ;# Bank7 WST1=10
mww 0x600000D4 0x00000001 ;# Bank7 WSTWEN=1
mww 0x600000CC 0x0000000C ;# Bank7 WST2=8
mww 0x600000C4 0x00000002 ;# Bank7 IDCY=2
}

30
tcl/board/imx35pdk.cfg
View File

@ -27,8 +27,8 @@ proc imx35pdk_init { } {
mww 0x53f00004 0x77777777
# clock setup
mww 0x53F80004 0x00821000 # first need to set IPU_HND_BYP
mww 0x53F80004 0x00821000 #arm clock is 399Mhz and ahb clock is 133Mhz.
mww 0x53F80004 0x00821000 ;# first need to set IPU_HND_BYP
mww 0x53F80004 0x00821000 ;#arm clock is 399Mhz and ahb clock is 133Mhz.
#=================================================
# WEIM config
@ -122,8 +122,8 @@ proc imx35pdk_init { } {
mww 0x43FAC474 0x00000006
mww 0x43FAC478 0x00000006
mww 0x43FAC47c 0x00000006
mww 0x43FAC480 0x00000006 # CSD0
mww 0x43FAC484 0x00000006 # CSD1
mww 0x43FAC480 0x00000006 ;# CSD0
mww 0x43FAC484 0x00000006 ;# CSD1
mww 0x43FAC488 0x00000006
mww 0x43FAC48c 0x00000006
mww 0x43FAC490 0x00000006
@ -131,12 +131,12 @@ proc imx35pdk_init { } {
mww 0x43FAC498 0x00000006
mww 0x43FAC49c 0x00000006
mww 0x43FAC4A0 0x00000006
mww 0x43FAC4A4 0x00000006 # RAS
mww 0x43FAC4A8 0x00000006 # CAS
mww 0x43FAC4Ac 0x00000006 # SDWE
mww 0x43FAC4B0 0x00000006 # SDCKE0
mww 0x43FAC4B4 0x00000006 # SDCKE1
mww 0x43FAC4B8 0x00000002 # SDCLK
mww 0x43FAC4A4 0x00000006 ;# RAS
mww 0x43FAC4A8 0x00000006 ;# CAS
mww 0x43FAC4Ac 0x00000006 ;# SDWE
mww 0x43FAC4B0 0x00000006 ;# SDCKE0
mww 0x43FAC4B4 0x00000006 ;# SDCKE1
mww 0x43FAC4B8 0x00000002 ;# SDCLK
# SDQS0 through SDQS3
mww 0x43FAC4Bc 0x00000082
@ -211,7 +211,7 @@ proc imx35pdk_init { } {
# DDR2 : Load reg EMR1 -- OCD default
mwb 0x82000780 0xda
# DDR2 : Load reg EMR1 -- OCD exit
mwb 0x82000400 0xda # ODT disabled
mwb 0x82000400 0xda ;# ODT disabled
# ESD_ESDCTL0 : select normal-operation mode
# DSIZ=32-bit, BL=8, COL=10-bit, ROW=13-bit
@ -229,10 +229,10 @@ proc imx35pdk_init { } {
# Adjust the ESDCDLY5 register
#***********************************************
# Vary DQS_ABS_OFFSET5 for writes
mww 0xB8001020 0x00F48000 # this is the default value
mww 0xB8001024 0x00F48000 # this is the default value
mww 0xB8001028 0x00F48000 # this is the default value
mww 0xB800102c 0x00F48000 # this is the default value
mww 0xB8001020 0x00F48000 ;# this is the default value
mww 0xB8001024 0x00F48000 ;# this is the default value
mww 0xB8001028 0x00F48000 ;# this is the default value
mww 0xB800102c 0x00F48000 ;# this is the default value
#Then you can make force measure with the dedicated bit (Bit 7 at ESDMISC)

60
tcl/board/mini2440.cfg
View File

@ -182,10 +182,10 @@ proc init_2440 { } {
# usb clock are off 12mHz xtal
#-----------------------------------------------
mww phys 0x4C000014 0x00000005 # Clock Divider control Reg
mww phys 0x4C000000 0xFFFFFFFF # LOCKTIME count register
mww phys 0x4C000008 0x00038022 # UPPLCON USB clock config Reg
mww phys 0x4C000004 0x0007F021 # MPPLCON Proc clock config Reg
mww phys 0x4C000014 0x00000005 ;# Clock Divider control Reg
mww phys 0x4C000000 0xFFFFFFFF ;# LOCKTIME count register
mww phys 0x4C000008 0x00038022 ;# UPPLCON USB clock config Reg
mww phys 0x4C000004 0x0007F021 ;# MPPLCON Proc clock config Reg
#-----------------------------------------------
# Configure Memory controller
@ -193,45 +193,45 @@ proc init_2440 { } {
# DRAM - 64MB - 32 bit bus, uses BANKCON6 BANKCON7
#-----------------------------------------------
mww phys 0x48000000 0x22111112 # BWSCON - Bank and Bus Width
mww phys 0x48000010 0x00001112 # BANKCON4 - ?
mww phys 0x4800001c 0x00018009 # BANKCON6 - DRAM
mww phys 0x48000020 0x00018009 # BANKCON7 - DRAM
mww phys 0x48000024 0x008E04EB # REFRESH - DRAM
mww phys 0x48000028 0x000000B2 # BANKSIZE - DRAM
mww phys 0x4800002C 0x00000030 # MRSRB6 - DRAM
mww phys 0x48000030 0x00000030 # MRSRB7 - DRAM
mww phys 0x48000000 0x22111112 ;# BWSCON - Bank and Bus Width
mww phys 0x48000010 0x00001112 ;# BANKCON4 - ?
mww phys 0x4800001c 0x00018009 ;# BANKCON6 - DRAM
mww phys 0x48000020 0x00018009 ;# BANKCON7 - DRAM
mww phys 0x48000024 0x008E04EB ;# REFRESH - DRAM
mww phys 0x48000028 0x000000B2 ;# BANKSIZE - DRAM
mww phys 0x4800002C 0x00000030 ;# MRSRB6 - DRAM
mww phys 0x48000030 0x00000030 ;# MRSRB7 - DRAM
#-----------------------------------------------
# Now port configuration for enables for memory
# and other stuff.
#-----------------------------------------------
mww phys 0x56000000 0x007FFFFF # GPACON
mww phys 0x56000000 0x007FFFFF ;# GPACON
mww phys 0x56000010 0x00295559 # GPBCON
mww phys 0x56000018 0x000003FF # GPBUP (PULLUP ENABLE)
mww phys 0x56000014 0x000007C2 # GPBDAT
mww phys 0x56000010 0x00295559 ;# GPBCON
mww phys 0x56000018 0x000003FF ;# GPBUP (PULLUP ENABLE)
mww phys 0x56000014 0x000007C2 ;# GPBDAT
mww phys 0x56000020 0xAAAAA6AA # GPCCON
mww phys 0x56000028 0x0000FFFF # GPCUP
mww phys 0x56000024 0x00000020 # GPCDAT
mww phys 0x56000020 0xAAAAA6AA ;# GPCCON
mww phys 0x56000028 0x0000FFFF ;# GPCUP
mww phys 0x56000024 0x00000020 ;# GPCDAT
mww phys 0x56000030 0xAAAAAAAA # GPDCON
mww phys 0x56000038 0x0000FFFF # GPDUP
mww phys 0x56000030 0xAAAAAAAA ;# GPDCON
mww phys 0x56000038 0x0000FFFF ;# GPDUP
mww phys 0x56000040 0xAAAAAAAA # GPECON
mww phys 0x56000048 0x0000FFFF # GPEUP
mww phys 0x56000040 0xAAAAAAAA ;# GPECON
mww phys 0x56000048 0x0000FFFF ;# GPEUP
mww phys 0x56000050 0x00001555 # GPFCON
mww phys 0x56000058 0x0000007F # GPFUP
mww phys 0x56000054 0x00000000 # GPFDAT
mww phys 0x56000050 0x00001555 ;# GPFCON
mww phys 0x56000058 0x0000007F ;# GPFUP
mww phys 0x56000054 0x00000000 ;# GPFDAT
mww phys 0x56000060 0x00150114 # GPGCON
mww phys 0x56000068 0x0000007F # GPGUP
mww phys 0x56000060 0x00150114 ;# GPGCON
mww phys 0x56000068 0x0000007F ;# GPGUP
mww phys 0x56000070 0x0015AAAA # GPHCON
mww phys 0x56000078 0x000003FF # GPGUP
mww phys 0x56000070 0x0015AAAA ;# GPHCON
mww phys 0x56000078 0x000003FF ;# GPGUP
}

42
tcl/board/olimex_sam9_l9260.cfg
View File

@ -30,43 +30,43 @@ $_TARGETNAME configure -event reset-start {
}
$_TARGETNAME configure -event reset-init {
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
##
# Clock configuration for 99.328 MHz main clock.
##
echo "Setting up clock"
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable main oscillator, 512 slow clock startup
sleep 20 # wait 20 ms (need 15.6 ms for startup)
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator (18.432 MHz)
sleep 10 # wait 10 ms
mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR : 18.432 MHz / 9 * 97 = 198.656 MHz, 63 slow clock startup
sleep 20 # wait 20 ms (need 1.9 ms for startup)
mww 0xfffffc30 0x00000101 # PMC_MCKR : no scale on proc clock, master is proc / 2
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : switch to PLLA (99.328 MHz)
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable main oscillator, 512 slow clock startup
sleep 20 ;# wait 20 ms (need 15.6 ms for startup)
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator (18.432 MHz)
sleep 10 ;# wait 10 ms
mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR : 18.432 MHz / 9 * 97 = 198.656 MHz, 63 slow clock startup
sleep 20 ;# wait 20 ms (need 1.9 ms for startup)
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : no scale on proc clock, master is proc / 2
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : switch to PLLA (99.328 MHz)
# Increase JTAG speed to 6 MHz if RCLK is not supported.
jtag_rclk 6000
arm7_9 dcc_downloads enable # Enable faster DCC downloads.
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads.
##
# SDRAM configuration for 2 x Samsung K4S561632J-UC75, 4M x 16Bit x 4 Banks.
##
echo "Configuring SDRAM"
mww 0xfffff870 0xffff0000 # PIOC_ASR : select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 # PIOC_PDR : disable PIO function for D15..D31
mww 0xfffff870 0xffff0000 ;# PIOC_ASR : select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 ;# PIOC_PDR : disable PIO function for D15..D31
mww 0xffffef1c 0x00010002 # EBI_CSA : assign EBI CS1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffef1c 0x00010002 ;# EBI_CSA : assign EBI CS1 to SDRAM, VDDIOMSEL set for +3V3 memory
mww 0xffffea08 0x85237259 # SDRAMC_CR : configure SDRAM for Samsung chips
mww 0xffffea08 0x85237259 ;# SDRAMC_CR : configure SDRAM for Samsung chips
mww 0xffffea00 0x1 # SDRAMC_MR : issue NOP command
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' command
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' command
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
@ -82,12 +82,12 @@ $_TARGETNAME configure -event reset-init {
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode
mww 0x20000000 0
mww 0xffffea04 0x2b6 # SDRAMC_TR : set refresh timer count to 7 us
mww 0xffffea04 0x2b6 ;# SDRAMC_TR : set refresh timer count to 7 us
##
# NAND Flash Configuration for 1 x Samsung K9F4G08U0M, 512M x 8Bit.

128
tcl/board/openrd.cfg
View File

@ -31,72 +31,72 @@ proc openrd_init { } {
arm mcr 15 0 0 1 0 0x00052078
mww 0xD0001400 0x43000C30 # DDR SDRAM Configuration Register
mww 0xD0001404 0x37543000 # Dunit Control Low Register
mww 0xD0001408 0x22125451 # DDR SDRAM Timing (Low) Register
mww 0xD000140C 0x00000A33 # DDR SDRAM Timing (High) Register
mww 0xD0001410 0x000000CC # DDR SDRAM Address Control Register
mww 0xD0001414 0x00000000 # DDR SDRAM Open Pages Control Register
mww 0xD0001418 0x00000000 # DDR SDRAM Operation Register
mww 0xD000141C 0x00000C52 # DDR SDRAM Mode Register
mww 0xD0001420 0x00000004 # DDR SDRAM Extended Mode Register
mww 0xD0001424 0x0000F17F # Dunit Control High Register
mww 0xD0001428 0x00085520 # Dunit Control High Register
mww 0xD000147c 0x00008552 # Dunit Control High Register
mww 0xD0001504 0x0FFFFFF1 # CS0n Size Register
mww 0xD0001508 0x10000000 # CS1n Base Register
mww 0xD000150C 0x0FFFFFF5 # CS1n Size Register
mww 0xD0001514 0x00000000 # CS2n Size Register
mww 0xD000151C 0x00000000 # CS3n Size Register
mww 0xD0001494 0x00120012 # DDR2 SDRAM ODT Control (Low) Register
mww 0xD0001498 0x00000000 # DDR2 SDRAM ODT Control (High) REgister
mww 0xD000149C 0x0000E40F # DDR2 Dunit ODT Control Register
mww 0xD0001480 0x00000001 # DDR SDRAM Initialization Control Register
mww 0xD0020204 0x00000000 # Main IRQ Interrupt Mask Register
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0001400 0x43000C30 ;# DDR SDRAM Configuration Register
mww 0xD0001404 0x37543000 ;# Dunit Control Low Register
mww 0xD0001408 0x22125451 ;# DDR SDRAM Timing (Low) Register
mww 0xD000140C 0x00000A33 ;# DDR SDRAM Timing (High) Register
mww 0xD0001410 0x000000CC ;# DDR SDRAM Address Control Register
mww 0xD0001414 0x00000000 ;# DDR SDRAM Open Pages Control Register
mww 0xD0001418 0x00000000 ;# DDR SDRAM Operation Register
mww 0xD000141C 0x00000C52 ;# DDR SDRAM Mode Register
mww 0xD0001420 0x00000004 ;# DDR SDRAM Extended Mode Register
mww 0xD0001424 0x0000F17F ;# Dunit Control High Register
mww 0xD0001428 0x00085520 ;# Dunit Control High Register
mww 0xD000147c 0x00008552 ;# Dunit Control High Register
mww 0xD0001504 0x0FFFFFF1 ;# CS0n Size Register
mww 0xD0001508 0x10000000 ;# CS1n Base Register
mww 0xD000150C 0x0FFFFFF5 ;# CS1n Size Register
mww 0xD0001514 0x00000000 ;# CS2n Size Register
mww 0xD000151C 0x00000000 ;# CS3n Size Register
mww 0xD0001494 0x00120012 ;# DDR2 SDRAM ODT Control (Low) Register
mww 0xD0001498 0x00000000 ;# DDR2 SDRAM ODT Control (High) REgister
mww 0xD000149C 0x0000E40F ;# DDR2 Dunit ODT Control Register
mww 0xD0001480 0x00000001 ;# DDR SDRAM Initialization Control Register
mww 0xD0020204 0x00000000 ;# Main IRQ Interrupt Mask Register
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0010000 0x01111111 # MPP 0 to 7
mww 0xD0010004 0x11113322 # MPP 8 to 15
mww 0xD0010008 0x00001111 # MPP 16 to 23
mww 0xD0010000 0x01111111 ;# MPP 0 to 7
mww 0xD0010004 0x11113322 ;# MPP 8 to 15
mww 0xD0010008 0x00001111 ;# MPP 16 to 23
mww 0xD0010418 0x003E07CF # NAND Read Parameters REgister
mww 0xD001041C 0x000F0F0F # NAND Write Parameters Register
mww 0xD0010470 0x01C7D943 # NAND Flash Control Register
mww 0xD0010418 0x003E07CF ;# NAND Read Parameters REgister
mww 0xD001041C 0x000F0F0F ;# NAND Write Parameters Register
mww 0xD0010470 0x01C7D943 ;# NAND Flash Control Register
}

72
tcl/board/propox_mmnet1001.cfg
View File

@ -14,69 +14,69 @@ proc at91sam_init { } {
jtag_rclk 4
# Enable user reset and disable watchdog
mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
# Oscillator setup
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator (18.432 MHz)
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
sleep 10 # wait 10 ms
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator (18.432 MHz)
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
sleep 10 ;# wait 10 ms
# now we are running at 18.432 MHz kHz => 1/8 * 18.432 MHz = 2.304 MHz
jtag_rclk 2000
mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz
sleep 20 # wait 20 ms
mww 0xfffffc2c 0x207c3f0c # CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz)
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected
sleep 10 # wait 10 ms
mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198,656MHz
sleep 20 ;# wait 20 ms
mww 0xfffffc2c 0x207c3f0c ;# CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz)
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected
sleep 10 ;# wait 10 ms
# now we are running at 198.656 MHz kHz => full speed jtag
jtag_rclk 30000
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
# Configure PIO Controller for SDRAM data-lines D16-D31
# PC16-PC31 = Peripheral A: D16-D32
mww 0xfffff844 0xffff0000 # Interrupt Disable
mww 0xfffff854 0xffff0000 # Multi-Drive Disable
mww 0xfffff860 0xffff0000 # Pull-Up Disable
mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral A function for D15..D31
mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable)
mww 0xfffffc10 0x00000010 # Enable PIO-C Clock in PMC (PID=4)
mww 0xfffff844 0xffff0000 ;# Interrupt Disable
mww 0xfffff854 0xffff0000 ;# Multi-Drive Disable
mww 0xfffff860 0xffff0000 ;# Pull-Up Disable
mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral A function for D15..D31
mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable)
mww 0xfffffc10 0x00000010 ;# Enable PIO-C Clock in PMC (PID=4)
# SD-Ram setup
mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit))
mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
mww 0xffffef1c 0x2 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM
mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit))
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (1st)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (1st)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (2nd)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (2nd)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (3th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (3th)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (4th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (4th)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (5th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (5th)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (6th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (6th)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (7th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (7th)
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (8th)
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (8th)
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : Normal Mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : Normal Mode
mww 0x20000000 0
mww 0xFFFFEA04 0x30d # SDRAM Refresh Time Register
mww 0xFFFFEA04 0x30d ;# SDRAM Refresh Time Register
# datasheet: 8k refresh cycles / 64 ms
# MCLK / (8*1024 / 64e-3) = 100e6 / 128000 = 781 = 0x30d

60
tcl/board/pxa255_sst.cfg
View File

@ -17,75 +17,75 @@ set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe
proc pxa255_sst_init {} {
xscale cp15 15 0x00002001 #Enable CP0 and CP13 access
xscale cp15 15 0x00002001 ;#Enable CP0 and CP13 access
#
# setup GPIO
#
mww 0x40E00018 0x00008000 #CPSR0
mww 0x40E00018 0x00008000 ;#CPSR0
sleep 20
mww 0x40E0001C 0x00000002 #GPSR1
mww 0x40E0001C 0x00000002 ;#GPSR1
sleep 20
mww 0x40E00020 0x00000008 #GPSR2
mww 0x40E00020 0x00000008 ;#GPSR2
sleep 20
mww 0x40E0000C 0x00008000 #GPDR0
mww 0x40E0000C 0x00008000 ;#GPDR0
sleep 20
mww 0x40E00054 0x80000000 #GAFR0_L
mww 0x40E00054 0x80000000 ;#GAFR0_L
sleep 20
mww 0x40E00058 0x00188010 #GAFR0_H
mww 0x40E00058 0x00188010 ;#GAFR0_H
sleep 20
mww 0x40E0005C 0x60908018 #GAFR1_L
mww 0x40E0005C 0x60908018 ;#GAFR1_L
sleep 20
mww 0x40E0000C 0x0280E000 #GPDR0
mww 0x40E0000C 0x0280E000 ;#GPDR0
sleep 20
mww 0x40E00010 0x821C88B2 #GPDR1
mww 0x40E00010 0x821C88B2 ;#GPDR1
sleep 20
mww 0x40E00014 0x000F03DB #GPDR2
mww 0x40E00014 0x000F03DB ;#GPDR2
sleep 20
mww 0x40E00000 0x000F03DB #GPLR0
mww 0x40E00000 0x000F03DB ;#GPLR0
sleep 20
mww 0x40F00004 0x00000020 #PSSR
mww 0x40F00004 0x00000020 ;#PSSR
sleep 20
#
# setup memory controller
#
mww 0x48000008 0x01111998 #MSC0
mww 0x48000008 0x01111998 ;#MSC0
sleep 20
mww 0x48000010 0x00047ff0 #MSC2
mww 0x48000010 0x00047ff0 ;#MSC2
sleep 20
mww 0x48000014 0x00000000 #MECR
mww 0x48000014 0x00000000 ;#MECR
sleep 20
mww 0x48000028 0x00010504 #MCMEM0
mww 0x48000028 0x00010504 ;#MCMEM0
sleep 20
mww 0x4800002C 0x00010504 #MCMEM1
mww 0x4800002C 0x00010504 ;#MCMEM1
sleep 20
mww 0x48000030 0x00010504 #MCATT0
mww 0x48000030 0x00010504 ;#MCATT0
sleep 20
mww 0x48000034 0x00010504 #MCATT1
mww 0x48000034 0x00010504 ;#MCATT1
sleep 20
mww 0x48000038 0x00004715 #MCIO0
mww 0x48000038 0x00004715 ;#MCIO0
sleep 20
mww 0x4800003C 0x00004715 #MCIO1
mww 0x4800003C 0x00004715 ;#MCIO1
sleep 20
#
mww 0x48000004 0x03CA4018 #MDREF
mww 0x48000004 0x03CA4018 ;#MDREF
sleep 20
mww 0x48000004 0x004B4018 #MDREF
mww 0x48000004 0x004B4018 ;#MDREF
sleep 20
mww 0x48000004 0x000B4018 #MDREF
mww 0x48000004 0x000B4018 ;#MDREF
sleep 20
mww 0x48000004 0x000BC018 #MDREF
mww 0x48000004 0x000BC018 ;#MDREF
sleep 20
mww 0x48000000 0x00001AC8 #MDCNFG
mww 0x48000000 0x00001AC8 ;#MDCNFG
sleep 20
sleep 20
mww 0x48000000 0x00001AC9 #MDCNFG
mww 0x48000000 0x00001AC9 ;#MDCNFG
sleep 20
mww 0x48000040 0x00000000 #MDMRS
mww 0x48000040 0x00000000 ;#MDMRS
sleep 20
}
@ -96,4 +96,4 @@ reset_config trst_and_srst
adapter_nsrst_delay 200
jtag_ntrst_delay 200
#xscale debug_handler 0 0xFFFF0800 # debug handler base address
#xscale debug_handler 0 0xFFFF0800 ;# debug handler base address

34
tcl/board/rsc-w910.cfg
View File

@ -34,12 +34,12 @@ $_TARGETNAME configure -event reset-init {
# switch on PLL for 200MHz operation
# running from 15MHz input clock
mww 0xB0000200 0x00000030 # CLKEN
mww 0xB0000204 0x00000f3c # CLKSEL
mww 0xB0000208 0x05007000 # CLKDIV
mww 0xB000020C 0x00004f24 # PLLCON0
mww 0xB0000210 0x00002b63 # PLLCON1
mww 0xB000000C 0x08817fa6 # MFSEL
mww 0xB0000200 0x00000030 ;# CLKEN
mww 0xB0000204 0x00000f3c ;# CLKSEL
mww 0xB0000208 0x05007000 ;# CLKDIV
mww 0xB000020C 0x00004f24 ;# PLLCON0
mww 0xB0000210 0x00002b63 ;# PLLCON1
mww 0xB000000C 0x08817fa6 ;# MFSEL
sleep 10
# we are now running @ 200MHz
@ -52,15 +52,15 @@ $_TARGETNAME configure -event reset-init {
# map nor flash to 0x20000000
# map sdram to 0x00000000
mww 0xb0001000 0x000530c1 # EBICON
mww 0xb0001004 0x40030084 # ROMCON
mww 0xb0001008 0x000010ee # SDCONF0
mww 0xb000100C 0x00000000 # SDCONF1
mww 0xb0001010 0x0000015b # SDTIME0
mww 0xb0001014 0x0000015b # SDTIME1
mww 0xb0001018 0x00000000 # EXT0CON
mww 0xb000101C 0x00000000 # EXT1CON
mww 0xb0001020 0x00000000 # EXT2CON
mww 0xb0001024 0x00000000 # EXT3CON
mww 0xb000102c 0x00ff0048 # CKSKEW
mww 0xb0001000 0x000530c1 ;# EBICON
mww 0xb0001004 0x40030084 ;# ROMCON
mww 0xb0001008 0x000010ee ;# SDCONF0
mww 0xb000100C 0x00000000 ;# SDCONF1
mww 0xb0001010 0x0000015b ;# SDTIME0
mww 0xb0001014 0x0000015b ;# SDTIME1
mww 0xb0001018 0x00000000 ;# EXT0CON
mww 0xb000101C 0x00000000 ;# EXT1CON
mww 0xb0001020 0x00000000 ;# EXT2CON
mww 0xb0001024 0x00000000 ;# EXT3CON
mww 0xb000102c 0x00ff0048 ;# CKSKEW
}

128
tcl/board/sheevaplug.cfg
View File

@ -31,72 +31,72 @@ proc sheevaplug_init { } {
arm mcr 15 0 0 1 0 0x00052078
mww 0xD0001400 0x43000C30 # DDR SDRAM Configuration Register
mww 0xD0001404 0x39543000 # Dunit Control Low Register
mww 0xD0001408 0x22125451 # DDR SDRAM Timing (Low) Register
mww 0xD000140C 0x00000833 # DDR SDRAM Timing (High) Register
mww 0xD0001410 0x000000CC # DDR SDRAM Address Control Register
mww 0xD0001414 0x00000000 # DDR SDRAM Open Pages Control Register
mww 0xD0001418 0x00000000 # DDR SDRAM Operation Register
mww 0xD000141C 0x00000C52 # DDR SDRAM Mode Register
mww 0xD0001420 0x00000042 # DDR SDRAM Extended Mode Register
mww 0xD0001424 0x0000F17F # Dunit Control High Register
mww 0xD0001428 0x00085520 # Dunit Control High Register
mww 0xD000147c 0x00008552 # Dunit Control High Register
mww 0xD0001504 0x0FFFFFF1 # CS0n Size Register
mww 0xD0001508 0x10000000 # CS1n Base Register
mww 0xD000150C 0x0FFFFFF5 # CS1n Size Register
mww 0xD0001514 0x00000000 # CS2n Size Register
mww 0xD000151C 0x00000000 # CS3n Size Register
mww 0xD0001494 0x003C0000 # DDR2 SDRAM ODT Control (Low) Register
mww 0xD0001498 0x00000000 # DDR2 SDRAM ODT Control (High) REgister
mww 0xD000149C 0x0000F80F # DDR2 Dunit ODT Control Register
mww 0xD0001480 0x00000001 # DDR SDRAM Initialization Control Register
mww 0xD0020204 0x00000000 # Main IRQ Interrupt Mask Register
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0020204 0x00000000 # "
mww 0xD0001400 0x43000C30 ;# DDR SDRAM Configuration Register
mww 0xD0001404 0x39543000 ;# Dunit Control Low Register
mww 0xD0001408 0x22125451 ;# DDR SDRAM Timing (Low) Register
mww 0xD000140C 0x00000833 ;# DDR SDRAM Timing (High) Register
mww 0xD0001410 0x000000CC ;# DDR SDRAM Address Control Register
mww 0xD0001414 0x00000000 ;# DDR SDRAM Open Pages Control Register
mww 0xD0001418 0x00000000 ;# DDR SDRAM Operation Register
mww 0xD000141C 0x00000C52 ;# DDR SDRAM Mode Register
mww 0xD0001420 0x00000042 ;# DDR SDRAM Extended Mode Register
mww 0xD0001424 0x0000F17F ;# Dunit Control High Register
mww 0xD0001428 0x00085520 ;# Dunit Control High Register
mww 0xD000147c 0x00008552 ;# Dunit Control High Register
mww 0xD0001504 0x0FFFFFF1 ;# CS0n Size Register
mww 0xD0001508 0x10000000 ;# CS1n Base Register
mww 0xD000150C 0x0FFFFFF5 ;# CS1n Size Register
mww 0xD0001514 0x00000000 ;# CS2n Size Register
mww 0xD000151C 0x00000000 ;# CS3n Size Register
mww 0xD0001494 0x003C0000 ;# DDR2 SDRAM ODT Control (Low) Register
mww 0xD0001498 0x00000000 ;# DDR2 SDRAM ODT Control (High) REgister
mww 0xD000149C 0x0000F80F ;# DDR2 Dunit ODT Control Register
mww 0xD0001480 0x00000001 ;# DDR SDRAM Initialization Control Register
mww 0xD0020204 0x00000000 ;# Main IRQ Interrupt Mask Register
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0010000 0x01111111 # MPP 0 to 7
mww 0xD0010004 0x11113322 # MPP 8 to 15
mww 0xD0010008 0x00001111 # MPP 16 to 23
mww 0xD0010000 0x01111111 ;# MPP 0 to 7
mww 0xD0010004 0x11113322 ;# MPP 8 to 15
mww 0xD0010008 0x00001111 ;# MPP 16 to 23
mww 0xD0010418 0x003E07CF # NAND Read Parameters REgister
mww 0xD001041C 0x000F0F0F # NAND Write Parameters Register
mww 0xD0010470 0x01C7D943 # NAND Flash Control Register
mww 0xD0010418 0x003E07CF ;# NAND Read Parameters REgister
mww 0xD001041C 0x000F0F0F ;# NAND Write Parameters Register
mww 0xD0010470 0x01C7D943 ;# NAND Flash Control Register
}

2
tcl/board/spear310evb20.cfg
View File

@ -42,7 +42,7 @@ if { [info exists BOARD_HAS_SRST] } {
$_TARGETNAME configure -event reset-init { spear310evb20_init }
proc spear310evb20_init {} {
reg pc 0xffff0020 # loop forever
reg pc 0xffff0020 ;# loop forever
sp3xx_clock_default
sp3xx_common_init

2
tcl/board/telo.cfg
View File

@ -37,7 +37,7 @@ $_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -event reset-deassert-post {
# Force target into ARM state.
# soft_reset_halt # not implemented on ARM11
# soft_reset_halt ;# not implemented on ARM11
echo "Detected SRSRT asserted on C100.CPU"
}

2
tcl/board/topas910.cfg
View File

@ -107,7 +107,7 @@ proc topas910_init { } {
}
# comment the following out if usinf J-Link, it soes not support DCC
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
#####################

2
tcl/board/topasa900.cfg
View File

@ -113,7 +113,7 @@ proc topasa900_init { } {
}
# comment the following out if usinf J-Link, it soes not support DCC
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
#####################

56
tcl/board/unknown_at91sam9260.cfg
View File

@ -23,46 +23,46 @@ $_TARGETNAME configure -event reset-start {
$_TARGETNAME configure -event reset-init {
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
sleep 10 # wait 10 ms
mww 0xfffffc28 0x205dbf09 # CKGR_PLLAR: Set PLLA Register for 192.512MHz
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2)
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected (96.256 MHz)
sleep 10 # wait 10 ms
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
sleep 10 ;# wait 10 ms
mww 0xfffffc28 0x205dbf09 ;# CKGR_PLLAR: Set PLLA Register for 192.512MHz
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2)
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected (96.256 MHz)
sleep 10 ;# wait 10 ms
# Increase JTAG Speed to 6 MHz if RCLK is not supported
jtag_rclk 6000
arm7_9 dcc_downloads enable # Enable faster DCC downloads
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
mww 0xffffec04 0x09070806 # SMC_PULSE0
mww 0xffffec08 0x000d000b # SMC_CYCLE0
mww 0xffffec0c 0x00001003 # SMC_MODE0
mww 0xffffec00 0x01020102 ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
mww 0xffffec04 0x09070806 ;# SMC_PULSE0
mww 0xffffec08 0x000d000b ;# SMC_CYCLE0
mww 0xffffec0c 0x00001003 ;# SMC_MODE0
flash probe 0 # Identify flash bank 0
flash probe 0 ;# Identify flash bank 0
mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31
mww 0xfffff860 0xffff0000 # PIO_PUDR : Disable D15..D31 pull-ups
mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31
mww 0xfffff860 0xffff0000 ;# PIO_PUDR : Disable D15..D31 pull-ups
mww 0xffffef1c 0x00010102 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
mww 0xffffef1c 0x00010102 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM
# VDDIOMSEL set for +3V3 memory
# Disable D0..D15 pull-ups
mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
@ -78,11 +78,11 @@ $_TARGETNAME configure -event reset-init {
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode
mww 0x20000000 0
mww 0xffffea04 0x2a2 # SDRAMC_TR : Set refresh timer count to 7us
mww 0xffffea04 0x2a2 ;# SDRAMC_TR : Set refresh timer count to 7us
}

32
tcl/chip/st/spear/spear310.tcl
View File

@ -6,11 +6,11 @@
proc sp310_init {} {
mww 0xfca80034 0x0000ffff # enable all RAS clocks
mww 0xfca80040 0x00000000 # remove all RAS resets
mww 0xb4000008 0x00002ff4 # RAS function enable
mww 0xfca80034 0x0000ffff ;# enable all RAS clocks
mww 0xfca80040 0x00000000 ;# remove all RAS resets
mww 0xb4000008 0x00002ff4 ;# RAS function enable
mww 0xfca8013c 0x2f7bc210 # plgpio_pad_drv
mww 0xfca8013c 0x2f7bc210 ;# plgpio_pad_drv
mww 0xfca80140 0x017bdef6
}
@ -21,20 +21,20 @@ proc sp310_emi_init {} {
mmw 0xfca8013c 0x00039ce7 0x00000000
# set safe EMI timing as in BootROM
#mww 0x4f000000 0x0000000f # tAP_0_reg
#mww 0x4f000004 0x00000000 # tSDP_0_reg
#mww 0x4f000008 0x000000ff # tDPw_0_reg
#mww 0x4f00000c 0x00000111 # tDPr_0_reg
#mww 0x4f000010 0x00000002 # tDCS_0_reg
#mww 0x4f000000 0x0000000f ;# tAP_0_reg
#mww 0x4f000004 0x00000000 ;# tSDP_0_reg
#mww 0x4f000008 0x000000ff ;# tDPw_0_reg
#mww 0x4f00000c 0x00000111 ;# tDPr_0_reg
#mww 0x4f000010 0x00000002 ;# tDCS_0_reg
# set fast EMI timing as in Linux
mww 0x4f000000 0x00000010 # tAP_0_reg
mww 0x4f000004 0x00000005 # tSDP_0_reg
mww 0x4f000008 0x0000000a # tDPw_0_reg
mww 0x4f00000c 0x0000000a # tDPr_0_reg
mww 0x4f000010 0x00000005 # tDCS_0_re
mww 0x4f000000 0x00000010 ;# tAP_0_reg
mww 0x4f000004 0x00000005 ;# tSDP_0_reg
mww 0x4f000008 0x0000000a ;# tDPw_0_reg
mww 0x4f00000c 0x0000000a ;# tDPr_0_reg
mww 0x4f000010 0x00000005 ;# tDCS_0_re
# 32bit wide, 8/16/32bit access
mww 0x4f000014 0x0000000e # control_0_reg
mww 0x4f000094 0x0000003f # ack_reg
mww 0x4f000014 0x0000000e ;# control_0_reg
mww 0x4f000094 0x0000003f ;# ack_reg
}

40
tcl/chip/st/spear/spear3xx.tcl
View File

@ -15,34 +15,34 @@
# - HCLK = 166 MHz
# - PCLK = 83 MHz
proc sp3xx_clock_default {} {
mww 0xfca00000 0x00000002 # set sysclk slow
mww 0xfca00014 0x0ffffff8 # set pll timeout to minimum (100us ?!?)
mww 0xfca00000 0x00000002 ;# set sysclk slow
mww 0xfca00014 0x0ffffff8 ;# set pll timeout to minimum (100us ?!?)
# DDRCORE disable to change frequency
set val [expr ([mrw 0xfca8002c] & ~0x20000000) | 0x40000000]
mww 0xfca8002c $val
mww 0xfca8002c $val # Yes, write twice!
mww 0xfca8002c $val ;# Yes, write twice!
# programming PLL1
mww 0xfca8000c 0xa600010c # M=166 P=1 N=12
mww 0xfca80008 0x00001c0a # power down
mww 0xfca80008 0x00001c0e # enable
mww 0xfca80008 0x00001c06 # strobe
mww 0xfca8000c 0xa600010c ;# M=166 P=1 N=12
mww 0xfca80008 0x00001c0a ;# power down
mww 0xfca80008 0x00001c0e ;# enable
mww 0xfca80008 0x00001c06 ;# strobe
mww 0xfca80008 0x00001c0e
while { [expr [mrw 0xfca80008] & 0x01] == 0x00 } { sleep 1 }
# programming PLL2
mww 0xfca80018 0xa600010c # M=166, P=1, N=12
mww 0xfca80014 0x00001c0a # power down
mww 0xfca80014 0x00001c0e # enable
mww 0xfca80014 0x00001c06 # strobe
mww 0xfca80018 0xa600010c ;# M=166, P=1, N=12
mww 0xfca80014 0x00001c0a ;# power down
mww 0xfca80014 0x00001c0e ;# enable
mww 0xfca80014 0x00001c06 ;# strobe
mww 0xfca80014 0x00001c0e
while { [expr [mrw 0xfca80014] & 0x01] == 0x00 } { sleep 1 }
mww 0xfca80028 0x00000082 # enable plltimeen
mww 0xfca80024 0x00000511 # set hclkdiv="/2" & pclkdiv="/2"
mww 0xfca80028 0x00000082 ;# enable plltimeen
mww 0xfca80024 0x00000511 ;# set hclkdiv="/2" & pclkdiv="/2"
mww 0xfca00000 0x00000004 # setting SYSCTL to NORMAL mode
mww 0xfca00000 0x00000004 ;# setting SYSCTL to NORMAL mode
while { [expr [mrw 0xfca00000] & 0x20] != 0x20 } { sleep 1 }
# Select source of DDR clock
@ -54,15 +54,15 @@ proc sp3xx_clock_default {} {
}
proc sp3xx_common_init {} {
mww 0xfca8002c 0xfffffff8 # enable clock of all peripherals
mww 0xfca80038 0x00000000 # remove reset of all peripherals
mww 0xfca8002c 0xfffffff8 ;# enable clock of all peripherals
mww 0xfca80038 0x00000000 ;# remove reset of all peripherals
mww 0xfca800e4 0x78000008 # COMP1V8_REG
mww 0xfca800ec 0x78000008 # COMP3V3_REG
mww 0xfca800e4 0x78000008 ;# COMP1V8_REG
mww 0xfca800ec 0x78000008 ;# COMP3V3_REG
mww 0xfca80050 0x00000001 # Enable clk mem port 1
mww 0xfca80050 0x00000001 ;# Enable clk mem port 1
mww 0xfc000000 0x10000f5f # init SMI and set HW mode
mww 0xfc000000 0x10000f5f ;# init SMI and set HW mode
mww 0xfc000000 0x00000f5f
# Initialize Bus Interconnection Matrix

146
tcl/chip/st/spear/spear3xx_ddr.tcl
View File

@ -41,80 +41,80 @@ proc ddr_spr3xx_mt47h64m16_3_333_cl5_async {} {
# Use "1:2 sync" only when DDR clock source is PLL1 and
# HCLK is half of PLL1
mww 0xfc600000 0x00000001 # MEMCTL_AHB_SET_00 # This is async
mww 0xfc600004 0x00000000 # MEMCTL_AHB_SET_01
# mww 0xfc600000 0x02020201 # MEMCTL_AHB_SET_00 # This is 1:2 sync
# mww 0xfc600004 0x02020202 # MEMCTL_AHB_SET_01
mww 0xfc600000 0x00000001 ;# MEMCTL_AHB_SET_00 # This is async
mww 0xfc600004 0x00000000 ;# MEMCTL_AHB_SET_01
# mww 0xfc600000 0x02020201 ;# MEMCTL_AHB_SET_00 # This is 1:2 sync
# mww 0xfc600004 0x02020202 ;# MEMCTL_AHB_SET_01
mww 0xfc600008 0x01000000 # MEMCTL_RFSH_SET_00
mww 0xfc60000c 0x00000101 # MEMCTL_DLL_SET_00
mww 0xfc600010 0x00000101 # MEMCTL_GP_00
mww 0xfc600014 0x01000000 # MEMCTL_GP_01
mww 0xfc600018 0x00010001 # MEMCTL_GP_02
mww 0xfc60001c 0x00000100 # MEMCTL_GP_03
mww 0xfc600020 0x00010001 # MEMCTL_GP_04
mww 0xfc600024 0x01020203 # MEMCTL_GP_05
mww 0xfc600028 0x01000102 # MEMCTL_GP_06
mww 0xfc60002c 0x02000202 # MEMCTL_AHB_SET_02
mww 0xfc600030 0x04040105 # MEMCTL_AHB_SET_03
mww 0xfc600034 0x03030302 # MEMCTL_AHB_SET_04
mww 0xfc600038 0x02040101 # MEMCTL_AHB_SET_05
mww 0xfc60003c 0x00000002 # MEMCTL_AHB_SET_06
mww 0xfc600044 0x03000405 # MEMCTL_DQS_SET_0
mww 0xfc600048 0x03040002 # MEMCTL_TIME_SET_01
mww 0xfc60004c 0x04000305 # MEMCTL_TIME_SET_02
mww 0xfc600050 0x0505053f # MEMCTL_AHB_RELPR_00
mww 0xfc600054 0x05050505 # MEMCTL_AHB_RELPR_01
mww 0xfc600058 0x04040405 # MEMCTL_AHB_RELPR_02
mww 0xfc60005c 0x04040404 # MEMCTL_AHB_RELPR_03
mww 0xfc600060 0x03030304 # MEMCTL_AHB_RELPR_04
mww 0xfc600064 0x03030303 # MEMCTL_AHB_RELPR_05
mww 0xfc600068 0x02020203 # MEMCTL_AHB_RELPR_06
mww 0xfc60006c 0x02020202 # MEMCTL_AHB_RELPR_07
mww 0xfc600070 0x01010102 # MEMCTL_AHB_RELPR_08
mww 0xfc600074 0x01010101 # MEMCTL_AHB_RELPR_09
mww 0xfc600078 0x00000001 # MEMCTL_AHB_RELPR_10
mww 0xfc600088 0x0a0c0a00 # MEMCTL_DQS_SET_1
mww 0xfc60008c 0x0000023f # MEMCTL_GP_07
mww 0xfc600090 0x00050a00 # MEMCTL_GP_08
mww 0xfc600094 0x11000000 # MEMCTL_GP_09
mww 0xfc600098 0x00001302 # MEMCTL_GP_10
mww 0xfc60009c 0x00001c1c # MEMCTL_DLL_SET_01
mww 0xfc6000a0 0x7c000000 # MEMCTL_DQS_OUT_SHIFT
mww 0xfc6000a4 0x005c0000 # MEMCTL_WR_DQS_SHIFT
mww 0xfc6000a8 0x2b050e00 # MEMCTL_TIME_SET_03
mww 0xfc6000ac 0x00640064 # MEMCTL_AHB_PRRLX_00
mww 0xfc6000b0 0x00640064 # MEMCTL_AHB_PRRLX_01
mww 0xfc6000b4 0x00000064 # MEMCTL_AHB_PRRLX_02
mww 0xfc6000b8 0x00000000 # MEMCTL_OUTRANGE_LGTH
mww 0xfc6000bc 0x00200020 # MEMCTL_AHB_RW_SET_00
mww 0xfc6000c0 0x00200020 # MEMCTL_AHB_RW_SET_01
mww 0xfc6000c4 0x00200020 # MEMCTL_AHB_RW_SET_02
mww 0xfc6000c8 0x00200020 # MEMCTL_AHB_RW_SET_03
mww 0xfc6000cc 0x00200020 # MEMCTL_AHB_RW_SET_04
mww 0xfc6000d8 0x00000a24 # MEMCTL_TREF
mww 0xfc6000dc 0x00000000 # MEMCTL_EMRS3_DATA
mww 0xfc6000e0 0x5b1c00c8 # MEMCTL_TIME_SET_04
mww 0xfc6000e4 0x00c8002e # MEMCTL_TIME_SET_05
mww 0xfc6000e8 0x00000000 # MEMCTL_VERSION
mww 0xfc6000ec 0x0001046b # MEMCTL_TINIT
mww 0xfc6000f0 0x00000000 # MEMCTL_OUTRANGE_ADDR_01
mww 0xfc6000f4 0x00000000 # MEMCTL_OUTRANGE_ADDR_02
mww 0xfc600104 0x001c0000 # MEMCTL_DLL_DQS_DELAY_BYPASS_0
mww 0xfc600108 0x0019001c # MEMCTL_DLL_SET_02
mww 0xfc60010c 0x00100000 # MEMCTL_DLL_SET_03
mww 0xfc600110 0x001e007a # MEMCTL_DQS_SET_2
mww 0xfc600188 0x00000000 # MEMCTL_USER_DEF_REG_0
mww 0xfc60018c 0x00000000 # MEMCTL_USER_DEF_REG_1
mww 0xfc600190 0x01010001 # MEMCTL_GP_11
mww 0xfc600194 0x01000000 # MEMCTL_GP_12
mww 0xfc600198 0x00000001 # MEMCTL_GP_13
mww 0xfc60019c 0x00400000 # MEMCTL_GP_14
mww 0xfc6001a0 0x00000000 # MEMCTL_EMRS2_DATA_X
mww 0xfc6001a4 0x00000000 # MEMCTL_LWPWR_CNT
mww 0xfc6001a8 0x00000000 # MEMCTL_LWPWR_REG
mww 0xfc6001ac 0x00860000 # MEMCTL_GP_15
mww 0xfc6001b0 0x00000002 # MEMCTL_TPDEX
mww 0xfc600008 0x01000000 ;# MEMCTL_RFSH_SET_00
mww 0xfc60000c 0x00000101 ;# MEMCTL_DLL_SET_00
mww 0xfc600010 0x00000101 ;# MEMCTL_GP_00
mww 0xfc600014 0x01000000 ;# MEMCTL_GP_01
mww 0xfc600018 0x00010001 ;# MEMCTL_GP_02
mww 0xfc60001c 0x00000100 ;# MEMCTL_GP_03
mww 0xfc600020 0x00010001 ;# MEMCTL_GP_04
mww 0xfc600024 0x01020203 ;# MEMCTL_GP_05
mww 0xfc600028 0x01000102 ;# MEMCTL_GP_06
mww 0xfc60002c 0x02000202 ;# MEMCTL_AHB_SET_02
mww 0xfc600030 0x04040105 ;# MEMCTL_AHB_SET_03
mww 0xfc600034 0x03030302 ;# MEMCTL_AHB_SET_04
mww 0xfc600038 0x02040101 ;# MEMCTL_AHB_SET_05
mww 0xfc60003c 0x00000002 ;# MEMCTL_AHB_SET_06
mww 0xfc600044 0x03000405 ;# MEMCTL_DQS_SET_0
mww 0xfc600048 0x03040002 ;# MEMCTL_TIME_SET_01
mww 0xfc60004c 0x04000305 ;# MEMCTL_TIME_SET_02
mww 0xfc600050 0x0505053f ;# MEMCTL_AHB_RELPR_00
mww 0xfc600054 0x05050505 ;# MEMCTL_AHB_RELPR_01
mww 0xfc600058 0x04040405 ;# MEMCTL_AHB_RELPR_02
mww 0xfc60005c 0x04040404 ;# MEMCTL_AHB_RELPR_03
mww 0xfc600060 0x03030304 ;# MEMCTL_AHB_RELPR_04
mww 0xfc600064 0x03030303 ;# MEMCTL_AHB_RELPR_05
mww 0xfc600068 0x02020203 ;# MEMCTL_AHB_RELPR_06
mww 0xfc60006c 0x02020202 ;# MEMCTL_AHB_RELPR_07
mww 0xfc600070 0x01010102 ;# MEMCTL_AHB_RELPR_08
mww 0xfc600074 0x01010101 ;# MEMCTL_AHB_RELPR_09
mww 0xfc600078 0x00000001 ;# MEMCTL_AHB_RELPR_10
mww 0xfc600088 0x0a0c0a00 ;# MEMCTL_DQS_SET_1
mww 0xfc60008c 0x0000023f ;# MEMCTL_GP_07
mww 0xfc600090 0x00050a00 ;# MEMCTL_GP_08
mww 0xfc600094 0x11000000 ;# MEMCTL_GP_09
mww 0xfc600098 0x00001302 ;# MEMCTL_GP_10
mww 0xfc60009c 0x00001c1c ;# MEMCTL_DLL_SET_01
mww 0xfc6000a0 0x7c000000 ;# MEMCTL_DQS_OUT_SHIFT
mww 0xfc6000a4 0x005c0000 ;# MEMCTL_WR_DQS_SHIFT
mww 0xfc6000a8 0x2b050e00 ;# MEMCTL_TIME_SET_03
mww 0xfc6000ac 0x00640064 ;# MEMCTL_AHB_PRRLX_00
mww 0xfc6000b0 0x00640064 ;# MEMCTL_AHB_PRRLX_01
mww 0xfc6000b4 0x00000064 ;# MEMCTL_AHB_PRRLX_02
mww 0xfc6000b8 0x00000000 ;# MEMCTL_OUTRANGE_LGTH
mww 0xfc6000bc 0x00200020 ;# MEMCTL_AHB_RW_SET_00
mww 0xfc6000c0 0x00200020 ;# MEMCTL_AHB_RW_SET_01
mww 0xfc6000c4 0x00200020 ;# MEMCTL_AHB_RW_SET_02
mww 0xfc6000c8 0x00200020 ;# MEMCTL_AHB_RW_SET_03
mww 0xfc6000cc 0x00200020 ;# MEMCTL_AHB_RW_SET_04
mww 0xfc6000d8 0x00000a24 ;# MEMCTL_TREF
mww 0xfc6000dc 0x00000000 ;# MEMCTL_EMRS3_DATA
mww 0xfc6000e0 0x5b1c00c8 ;# MEMCTL_TIME_SET_04
mww 0xfc6000e4 0x00c8002e ;# MEMCTL_TIME_SET_05
mww 0xfc6000e8 0x00000000 ;# MEMCTL_VERSION
mww 0xfc6000ec 0x0001046b ;# MEMCTL_TINIT
mww 0xfc6000f0 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_01
mww 0xfc6000f4 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_02
mww 0xfc600104 0x001c0000 ;# MEMCTL_DLL_DQS_DELAY_BYPASS_0
mww 0xfc600108 0x0019001c ;# MEMCTL_DLL_SET_02
mww 0xfc60010c 0x00100000 ;# MEMCTL_DLL_SET_03
mww 0xfc600110 0x001e007a ;# MEMCTL_DQS_SET_2
mww 0xfc600188 0x00000000 ;# MEMCTL_USER_DEF_REG_0
mww 0xfc60018c 0x00000000 ;# MEMCTL_USER_DEF_REG_1
mww 0xfc600190 0x01010001 ;# MEMCTL_GP_11
mww 0xfc600194 0x01000000 ;# MEMCTL_GP_12
mww 0xfc600198 0x00000001 ;# MEMCTL_GP_13
mww 0xfc60019c 0x00400000 ;# MEMCTL_GP_14
mww 0xfc6001a0 0x00000000 ;# MEMCTL_EMRS2_DATA_X
mww 0xfc6001a4 0x00000000 ;# MEMCTL_LWPWR_CNT
mww 0xfc6001a8 0x00000000 ;# MEMCTL_LWPWR_REG
mww 0xfc6001ac 0x00860000 ;# MEMCTL_GP_15
mww 0xfc6001b0 0x00000002 ;# MEMCTL_TPDEX
# MPMC START
mww 0xfc60001c 0x01000100
}

2
tcl/interface/buspirate.cfg
View File

@ -10,7 +10,7 @@ interface buspirate
#buspirate_port /dev/ttyUSB0
# communication speed setting
buspirate_speed normal # or fast
buspirate_speed normal ;# or fast
# voltage regulator Enabled = 1 Disabled = 0
#buspirate_vreg 0

40
tcl/target/ar71xx.cfg
View File

@ -15,35 +15,35 @@ target create $TARGETNAME mips_m4k -endian big -chain-position $TARGETNAME
$TARGETNAME configure -event reset-halt-post {
#setup PLL to lowest common denominator 300/300/150 setting
mww 0xb8050000 0x000f40a3 # reset val + CPU:3 DDR:3 AHB:0
mww 0xb8050000 0x800f40a3 # send to PLL
mww 0xb8050000 0x000f40a3 ;# reset val + CPU:3 DDR:3 AHB:0
mww 0xb8050000 0x800f40a3 ;# send to PLL
#next command will reset for PLL changes to take effect
mww 0xb8050008 3 # set reset_switch and clock_switch (resets SoC)
mww 0xb8050008 3 ;# set reset_switch and clock_switch (resets SoC)
}
$TARGETNAME configure -event reset-init {
#complete pll initialization
mww 0xb8050000 0x800f0080 # set sw_update bit
mww 0xb8050008 0 # clear reset_switch bit
mww 0xb8050000 0x800f00e8 # clr pwrdwn & bypass
mww 0xb8050008 1 # set clock_switch bit
sleep 1 # wait for lock
mww 0xb8050000 0x800f0080 ;# set sw_update bit
mww 0xb8050008 0 ;# clear reset_switch bit
mww 0xb8050000 0x800f00e8 ;# clr pwrdwn & bypass
mww 0xb8050008 1 ;# set clock_switch bit
sleep 1 ;# wait for lock
# Setup DDR config and flash mapping
mww 0xb8000000 0xefbc8cd0 # DDR cfg cdl val (rst: 0x5bfc8d0)
mww 0xb8000004 0x8e7156a2 # DDR cfg2 cdl val (rst: 0x80d106a8)
mww 0xb8000000 0xefbc8cd0 ;# DDR cfg cdl val (rst: 0x5bfc8d0)
mww 0xb8000004 0x8e7156a2 ;# DDR cfg2 cdl val (rst: 0x80d106a8)
mww 0xb8000010 8 # force precharge all banks
mww 0xb8000010 1 # force EMRS update cycle
mww 0xb800000c 0 # clr ext. mode register
mww 0xb8000010 2 # force auto refresh all banks
mww 0xb8000010 8 # force precharge all banks
mww 0xb8000008 0x31 # set DDR mode value CAS=3
mww 0xb8000010 1 # force EMRS update cycle
mww 0xb8000014 0x461b # DDR refresh value
mww 0xb8000018 0xffff # DDR Read Data This Cycle value (16bit: 0xffff)
mww 0xb800001c 0x7 # delay added to the DQS line (normal = 7)
mww 0xb8000010 8 ;# force precharge all banks
mww 0xb8000010 1 ;# force EMRS update cycle
mww 0xb800000c 0 ;# clr ext. mode register
mww 0xb8000010 2 ;# force auto refresh all banks
mww 0xb8000010 8 ;# force precharge all banks
mww 0xb8000008 0x31 ;# set DDR mode value CAS=3
mww 0xb8000010 1 ;# force EMRS update cycle
mww 0xb8000014 0x461b ;# DDR refresh value
mww 0xb8000018 0xffff ;# DDR Read Data This Cycle value (16bit: 0xffff)
mww 0xb800001c 0x7 ;# delay added to the DQS line (normal = 7)
mww 0xb8000020 0
mww 0xb8000024 0
mww 0xb8000028 0

56
tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
View File

@ -63,41 +63,41 @@ arm7_9 dcc_downloads enable
arm7_9 fast_memory_access enable
proc at91sam_init { } {
mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset
mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
sleep 10 # wait 10 ms
mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz
sleep 20 # wait 20 ms
mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler
sleep 10 # wait 10 ms
mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected
sleep 10 # wait 10 ms
mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
sleep 10 ;# wait 10 ms
mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198,656MHz
sleep 20 ;# wait 20 ms
mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler
sleep 10 ;# wait 10 ms
mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected
sleep 10 ;# wait 10 ms
# Now run at anything fast... ie: 10mhz!
jtag_rclk 10000 # Increase JTAG Speed to 6 MHz
jtag_rclk 10000 ;# Increase JTAG Speed to 6 MHz
mww 0xffffec00 0x0a0a0a0a # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
mww 0xffffec04 0x0b0b0b0b # SMC_PULSE0
mww 0xffffec08 0x00160016 # SMC_CYCLE0
mww 0xffffec0c 0x00161003 # SMC_MODE0
mww 0xffffec00 0x0a0a0a0a ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
mww 0xffffec04 0x0b0b0b0b ;# SMC_PULSE0
mww 0xffffec08 0x00160016 ;# SMC_CYCLE0
mww 0xffffec0c 0x00161003 ;# SMC_MODE0
mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31
mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31
mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31
mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
mww 0xffffef1c 0x2 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM
mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
#mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
#mww 0xffffea08 0x85227254 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
mww 0x20000000 0
mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
mww 0x20000000 0
mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
@ -113,9 +113,9 @@ proc at91sam_init { } {
mww 0x20000000 0
mww 0xffffea00 0x4
mww 0x20000000 0
mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
mww 0x20000000 0
mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode
mww 0x20000000 0
mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us
mww 0xffffea04 0x5d2 ;# SDRAMC_TR : Set refresh timer count to 15us
}

2
tcl/target/lpc3131.cfg
View File

@ -66,7 +66,7 @@ $_TARGETNAME configure -event reset-init {
echo "\nRunning reset init script for LPC3131\n"
halt
wait_halt
reg cpsr 0xa00000d3 #Supervisor mode
reg cpsr 0xa00000d3 ;#Supervisor mode
reg pc 0x11029000
poll
sleep 500

46
tcl/target/xba_revA3.cfg
View File

@ -35,36 +35,36 @@ $_TARGETNAME configure -event reset-init {
#############################################################################
# setup expansion bus CS, disable external wdt
#############################################################################
mww 0xc4000000 0xbd113842 #CS0 : Flash, write enabled @0x50000000
mww 0xc4000004 0x94d10013 #CS1
mww 0xc4000008 0x95960003 #CS2
mww 0xc400000c 0x00000000 #CS3
mww 0xc4000010 0x80900003 #CS4
mww 0xc4000014 0x9d520003 #CS5
mww 0xc4000018 0x81860001 #CS6
mww 0xc400001c 0x80900003 #CS7
mww 0xc4000000 0xbd113842 ;#CS0 : Flash, write enabled @0x50000000
mww 0xc4000004 0x94d10013 ;#CS1
mww 0xc4000008 0x95960003 ;#CS2
mww 0xc400000c 0x00000000 ;#CS3
mww 0xc4000010 0x80900003 ;#CS4
mww 0xc4000014 0x9d520003 ;#CS5
mww 0xc4000018 0x81860001 ;#CS6
mww 0xc400001c 0x80900003 ;#CS7
#############################################################################
# init SDRAM controller: 16MB, one bank, CL3
#############################################################################
mww 0xCC000000 0x2A # SDRAM_CFG: 64MBit, CL3
mww 0xCC000004 0 # disable refresh
mww 0xCC000008 3 # NOP
mww 0xCC000000 0x2A ;# SDRAM_CFG: 64MBit, CL3
mww 0xCC000004 0 ;# disable refresh
mww 0xCC000008 3 ;# NOP
sleep 100
mww 0xCC000004 2100 # set refresh counter
mww 0xCC000008 2 # Precharge All Banks
mww 0xCC000004 2100 ;# set refresh counter
mww 0xCC000008 2 ;# Precharge All Banks
sleep 100
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 4 # Auto Refresh
mww 0xCC000008 1 # Mode Select CL3
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 4 ;# Auto Refresh
mww 0xCC000008 1 ;# Mode Select CL3
#mww 0xc4000020 0xffffee # CFG0: remove expansion bus boot flash
#mww 0xc4000020 0xffffee ;# CFG0: remove expansion bus boot flash
#mirror at 0x00000000
#big endian