unsik Kim <donari75@gmail.com>:

Remove unused mflash bank command options.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1928 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
zwelch 2009-05-27 12:20:13 +00:00
parent 5c478a2cab
commit 2caf8655b5
3 changed files with 12 additions and 37 deletions

View File

@ -2509,22 +2509,19 @@ Use the standard str9 driver for programming. @xref{STR9 specific commands}.
@subsection mFlash Configuration
@cindex mFlash Configuration
@b{mflash bank} <@var{soc}> <@var{base}> <@var{chip_width}> <@var{bus_width}>
<@var{RST pin}> <@var{WP pin}> <@var{DPD pin}> <@var{target}>
@b{mflash bank} <@var{soc}> <@var{base}> <@var{RST pin}> <@var{target}>
@cindex mflash bank
@*Configures a mflash for <@var{soc}> host bank at
<@var{base}>. <@var{chip_width}> and <@var{bus_width}> are bytes
order. Pin number format is dependent on host GPIO calling convention.
If WP or DPD pin was not used, write -1. Currently, mflash bank
support s3c2440 and pxa270.
<@var{base}>. Pin number format is dependent on host GPIO calling convention.
Currently, mflash bank support s3c2440 and pxa270.
(ex. of s3c2440) mflash <@var{RST pin}> is GPIO B1, <@var{WP pin}> and <@var{DPD pin}> are not used.
(ex. of s3c2440) mflash <@var{RST pin}> is GPIO B1.
@example
mflash bank s3c2440 0x10000000 2 2 1b -1 -1 0
mflash bank s3c2440 0x10000000 1b 0
@end example
(ex. of pxa270) mflash <@var{RST pin}> is GPIO 43, <@var{DPD pin}> is not used and <@var{DPD pin}> is GPIO 51.
(ex. of pxa270) mflash <@var{RST pin}> is GPIO 43.
@example
mflash bank pxa270 0x08000000 2 2 43 -1 51 0
mflash bank pxa270 0x08000000 43 0
@end example
@section Microcontroller specific Flash Commands

View File

@ -203,16 +203,6 @@ static int mg_init_gpio (void)
gpio_drv->set_gpio_to_output(mflash_bank->rst_pin);
gpio_drv->set_gpio_output_val(mflash_bank->rst_pin, 1);
if (mflash_bank->wp_pin.num != -1) {
gpio_drv->set_gpio_to_output(mflash_bank->wp_pin);
gpio_drv->set_gpio_output_val(mflash_bank->wp_pin, 1);
}
if (mflash_bank->dpd_pin.num != -1) {
gpio_drv->set_gpio_to_output(mflash_bank->dpd_pin);
gpio_drv->set_gpio_output_val(mflash_bank->dpd_pin, 1);
}
return ERROR_OK;
}
@ -790,30 +780,22 @@ static int mg_bank_cmd(struct command_context_s *cmd_ctx, char *cmd, char **args
char *str;
int i;
if (argc < 8)
if (argc < 4)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
if ((target = get_target(args[7])) == NULL)
if ((target = get_target(args[3])) == NULL)
{
LOG_ERROR("target '%s' not defined", args[7]);
LOG_ERROR("target '%s' not defined", args[3]);
return ERROR_FAIL;
}
mflash_bank = calloc(sizeof(mflash_bank_t), 1);
mflash_bank->base = strtoul(args[1], NULL, 0);
mflash_bank->chip_width = strtoul(args[2], NULL, 0);
mflash_bank->bus_width = strtoul(args[3], NULL, 0);
mflash_bank->rst_pin.num = strtoul(args[4], &str, 0);
mflash_bank->rst_pin.num = strtoul(args[2], &str, 0);
if (*str)
mflash_bank->rst_pin.port[0] = (u16)tolower(str[0]);
mflash_bank->wp_pin.num = strtol(args[5], &str, 0);
if (*str)
mflash_bank->wp_pin.port[0] = (u16)tolower(str[0]);
mflash_bank->dpd_pin.num = strtol(args[6], &str, 0);
if (*str)
mflash_bank->dpd_pin.port[0] = (u16)tolower(str[0]);
mflash_bank->target = target;
@ -835,6 +817,6 @@ int mflash_register_commands(struct command_context_s *cmd_ctx)
{
mflash_cmd = register_command(cmd_ctx, NULL, "mflash", NULL, COMMAND_ANY, NULL);
register_command(cmd_ctx, mflash_cmd, "bank", mg_bank_cmd, COMMAND_CONFIG,
"mflash bank <soc> <base> <chip_width> <bus_width> <RST pin> <WP pin> <DPD pin> <target #>");
"mflash bank <soc> <base> <RST pin> <target #>");
return ERROR_OK;
}

View File

@ -125,12 +125,8 @@ typedef struct mg_drv_info_s {
typedef struct mflash_bank_s
{
u32 base;
u32 chip_width;
u32 bus_width;
mflash_gpio_num_t rst_pin;
mflash_gpio_num_t wp_pin;
mflash_gpio_num_t dpd_pin;
mflash_gpio_drv_t *gpio_drv;
target_t *target;