interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

arm_adi_v5: do not deactivate power domains while trying to clear sticky error 

At OpenOCD start-up the operation of clearing the sticky error in
CTRL/STAT register ignores the current value of the power domains
bits CDBGPWRUPREQ and CSYSPWRUPREQ in the same register and
incorrectly set them to zero.
This abrupt disable does not follow the requirement in IHI0031 to
wait for the acknowledgment of power disabled before continuing.
The power domains are then re-enabled immediately after; it is
possible that such short disable period has passed undetected or
has been tested only on devices that do not implement the power
domains.
Anyway, this sequence is incorrect and can generate unexpected
and hard-to-debug issues while OpenOCD attaches to a running
target that implements power domains.

Anticipate the initialization of dap->dp_ctrl_stat and use it
while clearing the sticky bit. This has the additional effect of
avoiding a power disable in the error recovery part of the
function dap_dp_read_atomic().
Keep the same sequence of read/write in dap_dp_init() to avoid
breaking the initialization of some problematic target.
Add comments to document these choices.

Change-Id: I8d6da788f2dd11909792b5d6b69bc90fbe4df25d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4677
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
This commit is contained in:
Antonio Borneo 2018-09-15 00:09:16 +02:00 committed by Matthias Welwarsky
parent 17de29c526
commit 1e3ba2046c
1 changed files with 21 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
src/target/arm_adi_v5.c
View File

@ -652,6 +652,15 @@ int dap_dp_init(struct adiv5_dap *dap)
dap_invalidate_cache(dap);
/*
* Early initialize dap->dp_ctrl_stat.
* In jtag mode only, if the following atomic reads fail and set the
* sticky error, it will trigger the clearing of the sticky. Without this
* initialization system and debug power would be disabled while clearing
* the sticky error bit.
*/
dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
for (size_t i = 0; i < 30; i++) {
/* DP initialization */
@ -660,7 +669,18 @@ int dap_dp_init(struct adiv5_dap *dap)
break;
}
retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
/*
* This write operation clears the sticky error bit in jtag mode only and
* is ignored in swd mode. It also powers-up system and debug domains in
* both jtag and swd modes, if not done before.
* Actually we do not need to clear the sticky error here because it has
* been already cleared (if it was set) in the previous atomic read. This
* write could be removed, but this initial part of dap_dp_init() is the
* result of years of fine tuning and there are strong concerns about any
* unnecessary code change. It doesn't harm, so let's keep it here and
* preserve the historical sequence of read/write operations!
*/
retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat | SSTICKYERR);
if (retval != ERROR_OK)
return retval;
@ -668,7 +688,6 @@ int dap_dp_init(struct adiv5_dap *dap)
if (retval != ERROR_OK)
return retval;
dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
if (retval != ERROR_OK)
return retval;