interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Remove board files that I shouldn't have added 

There are 3 other ones for the SiFive target.

Change-Id: I987331a82186a3738096cc390c91889118bf9ac2
This commit is contained in:
Tim Newsome 2017-12-29 13:11:27 -08:00
parent ab5a98663e
commit 1ddbe70443
3 changed files with 0 additions and 96 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
tcl/board/sifive-coreplexip-e31-arty.cfg
View File

@ -1,31 +0,0 @@
# JTAG adapter setup
adapter_khz 10000
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi_vid_pid 0x15ba 0x002a
ftdi_layout_init 0x0808 0x0a1b
ftdi_layout_signal nSRST -oe 0x0200
#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal LED -data 0x0800
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
# Un-comment these two flash lines if you have a SPI flash and want to write
# it.
flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
init
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
}
halt
flash protect 0 64 last off
echo "Ready for Remote Connections"

31
tcl/board/sifive-coreplexip-e51-arty.cfg
View File

@ -1,31 +0,0 @@
# JTAG adapter setup
adapter_khz 10000
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi_vid_pid 0x15ba 0x002a
ftdi_layout_init 0x0808 0x0a1b
ftdi_layout_signal nSRST -oe 0x0200
#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal LED -data 0x0800
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
# Un-comment these two flash lines if you have a SPI flash and want to write
# it.
flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
init
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
}
halt
flash protect 0 64 last off
echo "Ready for Remote Connections"

34
tcl/board/sifive-freedom-e300-hifive1.cfg
View File

@ -1,34 +0,0 @@
adapter_khz 10000
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x001b
ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
# ftdi_set_signal, but still good to document
#adapter_nsrst_delay 1500
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
init
#reset -- This type of reset is not implemented yet
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
#Wait for the reset stretcher
#It will work without this, but
#will incur lots of delays for later commands.
sleep 1500
}
halt
flash protect 0 64 last off