interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

target: Remove "-variant" argument 

Remove this underutilized feature. Despite the fact that a lot of configs
specifies a arbitrary "variant", only the xscale target actually defines
any.

In the case of xscale, the use of -variant is dubious since

1) it's used as a redundant irlen specifier,
2) it carries a comment that it doesn't really need it and
3) only two xscale configs even specify it.

If there's a future target that needs a variant set, a target specific
option could be added when needed.

Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2283
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Andreas Fritiofson 2014-09-08 22:11:02 +02:00 committed by Spencer Oliver
parent b2973be9cc
commit 1c021ed0af
42 changed files with 46 additions and 122 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
doc/openocd.texi
View File

@ -4169,10 +4169,9 @@ the given target with the given @var{name}; this is
only relevant on boards which have more than one target. only relevant on boards which have more than one target.
@end deffn @end deffn
@section Target CPU Types and Variants @section Target CPU Types
@cindex target type @cindex target type
@cindex CPU type @cindex CPU type
@cindex CPU variant
Each target has a @dfn{CPU type}, as shown in the output of Each target has a @dfn{CPU type}, as shown in the output of
the @command{targets} command. You need to specify that type the @command{targets} command. You need to specify that type
@ -4185,20 +4184,13 @@ what core-specific commands may be available
(@pxref{Architecture and Core Commands}), (@pxref{Architecture and Core Commands}),
and more. and more.
For some CPU types, OpenOCD also defines @dfn{variants} which
indicate differences that affect their handling.
For example, a particular implementation bug might need to be
worked around in some chip versions.
It's easy to see what target types are supported, It's easy to see what target types are supported,
since there's a command to list them. since there's a command to list them.
However, there is currently no way to list what target variants
are supported (other than by reading the OpenOCD source code).
@anchor{targettypes} @anchor{targettypes}
@deffn Command {target types} @deffn Command {target types}
Lists all supported target types. Lists all supported target types.
At this writing, the supported CPU types and variants are: At this writing, the supported CPU types are:
@itemize @bullet @itemize @bullet
@item @code{arm11} -- this is a generation of ARMv6 cores @item @code{arm11} -- this is a generation of ARMv6 cores
@ -4218,17 +4210,9 @@ compact Thumb2 instruction set.
(Support for this is still incomplete.) (Support for this is still incomplete.)
@item @code{fa526} -- resembles arm920 (w/o Thumb) @item @code{fa526} -- resembles arm920 (w/o Thumb)
@item @code{feroceon} -- resembles arm926 @item @code{feroceon} -- resembles arm926
@item @code{mips_m4k} -- a MIPS core. This supports one variant: @item @code{mips_m4k} -- a MIPS core
@item @code{xscale} -- this is actually an architecture, @item @code{xscale} -- this is actually an architecture,
not a CPU type. It is based on the ARMv5 architecture. not a CPU type. It is based on the ARMv5 architecture.
There are several variants defined:
@itemize @minus
@item @code{ixp42x}, @code{ixp45x}, @code{ixp46x},
@code{pxa27x} ... instruction register length is 7 bits
@item @code{pxa250}, @code{pxa255},
@code{pxa26x} ... instruction register length is 5 bits
@item @code{pxa3xx} ... instruction register length is 11 bits
@end itemize
@item @code{openrisc} -- this is an OpenRISC 1000 core. @item @code{openrisc} -- this is an OpenRISC 1000 core.
The current implementation supports three JTAG TAP cores: The current implementation supports three JTAG TAP cores:
@itemize @minus @itemize @minus
@ -4329,7 +4313,6 @@ and in other places the target needs to be identified.
@item @var{configparams} ... all parameters accepted by @item @var{configparams} ... all parameters accepted by
@command{$target_name configure} are permitted. @command{$target_name configure} are permitted.
If the target is big-endian, set it here with @code{-endian big}. If the target is big-endian, set it here with @code{-endian big}.
If the variant matters, set it here with @code{-variant}.
You @emph{must} set the @code{-chain-position @var{dotted.name}} here. You @emph{must} set the @code{-chain-position @var{dotted.name}} here.
@end itemize @end itemize
@ -4343,7 +4326,7 @@ using the @command{$target_name cget} command.
@emph{Warning:} changing some of these after setup is dangerous. @emph{Warning:} changing some of these after setup is dangerous.
For example, moving a target from one TAP to another; For example, moving a target from one TAP to another;
and changing its endianness or variant. and changing its endianness.
@itemize @bullet @itemize @bullet
@ -4360,9 +4343,6 @@ Calling this twice with two different event names assigns
two different handlers, but calling it twice with the two different handlers, but calling it twice with the
same event name assigns only one handler. same event name assigns only one handler.
@item @code{-variant} @var{name} -- specifies a variant of the target,
which OpenOCD needs to know about.
@item @code{-work-area-backup} (@option{0}|@option{1}) -- says @item @code{-work-area-backup} (@option{0}|@option{1}) -- says
whether the work area gets backed up; by default, whether the work area gets backed up; by default,
@emph{it is not backed up.} @emph{it is not backed up.}

28
src/target/target.c
View File

@ -4115,7 +4115,6 @@ enum target_cfg_param {
TCFG_WORK_AREA_SIZE, TCFG_WORK_AREA_SIZE,
TCFG_WORK_AREA_BACKUP, TCFG_WORK_AREA_BACKUP,
TCFG_ENDIAN, TCFG_ENDIAN,
TCFG_VARIANT,
TCFG_COREID, TCFG_COREID,
TCFG_CHAIN_POSITION, TCFG_CHAIN_POSITION,
TCFG_DBGBASE, TCFG_DBGBASE,
@ -4130,7 +4129,6 @@ static Jim_Nvp nvp_config_opts[] = {
{ .name = "-work-area-size", .value = TCFG_WORK_AREA_SIZE }, { .name = "-work-area-size", .value = TCFG_WORK_AREA_SIZE },
{ .name = "-work-area-backup", .value = TCFG_WORK_AREA_BACKUP }, { .name = "-work-area-backup", .value = TCFG_WORK_AREA_BACKUP },
{ .name = "-endian" , .value = TCFG_ENDIAN }, { .name = "-endian" , .value = TCFG_ENDIAN },
{ .name = "-variant", .value = TCFG_VARIANT },
{ .name = "-coreid", .value = TCFG_COREID }, { .name = "-coreid", .value = TCFG_COREID },
{ .name = "-chain-position", .value = TCFG_CHAIN_POSITION }, { .name = "-chain-position", .value = TCFG_CHAIN_POSITION },
{ .name = "-dbgbase", .value = TCFG_DBGBASE }, { .name = "-dbgbase", .value = TCFG_DBGBASE },
@ -4143,7 +4141,6 @@ static int target_configure(Jim_GetOptInfo *goi, struct target *target)
Jim_Nvp *n; Jim_Nvp *n;
Jim_Obj *o; Jim_Obj *o;
jim_wide w; jim_wide w;
char *cp;
int e; int e;
/* parse config or cget options ... */ /* parse config or cget options ... */
@ -4352,27 +4349,6 @@ no_params:
/* loop for more */ /* loop for more */
break; break;
case TCFG_VARIANT:
if (goi->isconfigure) {
if (goi->argc < 1) {
Jim_SetResultFormatted(goi->interp,
"%s ?STRING?",
n->name);
return JIM_ERR;
}
e = Jim_GetOpt_String(goi, &cp, NULL);
if (e != JIM_OK)
return e;
free(target->variant);
target->variant = strdup(cp);
} else {
if (goi->argc != 0)
goto no_params;
}
Jim_SetResultString(goi->interp, target->variant, -1);
/* loop for more */
break;
case TCFG_COREID: case TCFG_COREID:
if (goi->isconfigure) { if (goi->isconfigure) {
e = Jim_GetOpt_Wide(goi, &w); e = Jim_GetOpt_Wide(goi, &w);
@ -5185,10 +5161,6 @@ static int target_create(Jim_GetOptInfo *goi)
target->endianness = TARGET_LITTLE_ENDIAN; target->endianness = TARGET_LITTLE_ENDIAN;
} }
/* incase variant is not set */
if (!target->variant)
target->variant = strdup("");
cp = Jim_GetString(new_cmd, NULL); cp = Jim_GetString(new_cmd, NULL);
target->cmd_name = strdup(cp); target->cmd_name = strdup(cp);

1
src/target/target.h
View File

@ -129,7 +129,6 @@ struct target {
int target_number; /* DO NOT USE! field to be removed in 2010 */ int target_number; /* DO NOT USE! field to be removed in 2010 */
struct jtag_tap *tap; /* where on the jtag chain is this */ struct jtag_tap *tap; /* where on the jtag chain is this */
int32_t coreid; /* which device on the TAP? */ int32_t coreid; /* which device on the TAP? */
char *variant; /* what variant of this chip is it? */
/** /**
* Indicates whether this target has been examined. * Indicates whether this target has been examined.

33
src/target/xscale.c
View File

@ -2905,7 +2905,7 @@ static int xscale_init_target(struct command_context *cmd_ctx,
} }
static int xscale_init_arch_info(struct target *target, static int xscale_init_arch_info(struct target *target,
struct xscale_common *xscale, struct jtag_tap *tap, const char *variant) struct xscale_common *xscale, struct jtag_tap *tap)
{ {
struct arm *arm; struct arm *arm;
uint32_t high_reset_branch, low_reset_branch; uint32_t high_reset_branch, low_reset_branch;
@ -2916,33 +2916,7 @@ static int xscale_init_arch_info(struct target *target,
/* store architecture specfic data */ /* store architecture specfic data */
xscale->common_magic = XSCALE_COMMON_MAGIC; xscale->common_magic = XSCALE_COMMON_MAGIC;
/* we don't really *need* a variant param ... */ /* PXA3xx with 11 bit IR shifts the JTAG instructions */
if (variant) {
int ir_length = 0;
if (strcmp(variant, "pxa250") == 0
|| strcmp(variant, "pxa255") == 0
|| strcmp(variant, "pxa26x") == 0)
ir_length = 5;
else if (strcmp(variant, "pxa27x") == 0
|| strcmp(variant, "ixp42x") == 0
|| strcmp(variant, "ixp45x") == 0
|| strcmp(variant, "ixp46x") == 0)
ir_length = 7;
else if (strcmp(variant, "pxa3xx") == 0)
ir_length = 11;
else
LOG_WARNING("%s: unrecognized variant %s",
tap->dotted_name, variant);
if (ir_length && ir_length != tap->ir_length) {
LOG_WARNING("%s: IR length for %s is %d; fixing",
tap->dotted_name, variant, ir_length);
tap->ir_length = ir_length;
}
}
/* PXA3xx shifts the JTAG instructions */
if (tap->ir_length == 11) if (tap->ir_length == 11)
xscale->xscale_variant = XSCALE_PXA3XX; xscale->xscale_variant = XSCALE_PXA3XX;
else else
@ -3033,8 +3007,7 @@ static int xscale_target_create(struct target *target, Jim_Interp *interp)
if (!xscale) if (!xscale)
return ERROR_FAIL; return ERROR_FAIL;
return xscale_init_arch_info(target, xscale, target->tap, return xscale_init_arch_info(target, xscale, target->tap);
target->variant);
} }
COMMAND_HANDLER(xscale_handle_debug_handler_command) COMMAND_HANDLER(xscale_handle_debug_handler_command)

2
tcl/board/at91cap7a-stk-sdram.cfg
View File

@ -24,7 +24,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-start { $_TARGETNAME configure -event reset-start {
# start off real slow when we're running off internal RC oscillator # start off real slow when we're running off internal RC oscillator

2
tcl/target/at91r40008.cfg
View File

@ -25,5 +25,5 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0

2
tcl/target/at91sam7se512.cfg
View File

@ -29,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# The target # The target
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0

2
tcl/target/at91sam7sx.cfg
View File

@ -23,7 +23,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {
soft_reset_halt soft_reset_halt
# RSTC_CR : Reset peripherals # RSTC_CR : Reset peripherals

2
tcl/target/at91sam7x256.cfg
View File

@ -22,7 +22,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {
# disable watchdog # disable watchdog

2
tcl/target/at91sam7x512.cfg
View File

@ -22,7 +22,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {
# disable watchdog # disable watchdog

2
tcl/target/at91sam9.cfg
View File

@ -34,4 +34,4 @@ adapter_khz 3
###################### ######################
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME

2
tcl/target/cs351x.cfg
View File

@ -20,7 +20,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# Create the GDB Target. # Create the GDB Target.
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526 target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME
# There is 16K of SRAM on this chip # There is 16K of SRAM on this chip
# FIXME: flash programming is not working by using this work area. So comment this out for now. # FIXME: flash programming is not working by using this work area. So comment this out for now.

2
tcl/target/faux.cfg
View File

@ -23,7 +23,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
#target configuration #target configuration
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
#dummy flash driver #dummy flash driver
set _FLASHNAME $_CHIPNAME.flash set _FLASHNAME $_CHIPNAME.flash

2
tcl/target/gp326xxxa.cfg
View File

@ -24,7 +24,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
# Use internal SRAM as a work area # Use internal SRAM as a work area
$_TARGETNAME configure -work-area-phys 0xf8000000 -work-area-size 0x8000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0xf8000000 -work-area-size 0x8000 -work-area-backup 0

2
tcl/target/imx21.cfg
View File

@ -29,6 +29,6 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# Create the GDB Target. # Create the GDB Target.
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
arm7_9 dcc_downloads enable arm7_9 dcc_downloads enable

2
tcl/target/imx27.cfg
View File

@ -39,7 +39,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# Create the GDB Target. # Create the GDB Target.
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
# REVISIT what operating environment sets up this virtual address mapping? # REVISIT what operating environment sets up this virtual address mapping?
$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \ $_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \
-work-area-size 0x8000 -work-area-backup 1 -work-area-size 0x8000 -work-area-backup 1

2
tcl/target/imx28.cfg
View File

@ -33,6 +33,6 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_C
# Create the GDB Target. # Create the GDB Target.
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
arm7_9 dcc_downloads enable arm7_9 dcc_downloads enable

2
tcl/target/is5114.cfg
View File

@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1
#arm946e-s and #arm946e-s and
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-start { adapter_khz 16 } $_TARGETNAME configure -event reset-start { adapter_khz 16 }
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {

2
tcl/target/ixp42x.cfg
View File

@ -27,7 +27,7 @@ set _CPUTAPID6 0x29277013
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 -expected-id $_CPUTAPID4 -expected-id $_CPUTAPID5 -expected-id $_CPUTAPID6 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 -expected-id $_CPUTAPID4 -expected-id $_CPUTAPID5 -expected-id $_CPUTAPID6
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
# register constants for IXP42x SDRAM controller # register constants for IXP42x SDRAM controller

2
tcl/target/ks869x.cfg
View File

@ -25,7 +25,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0

4
tcl/target/lpc2900.cfg
View File

@ -42,7 +42,7 @@ if { $HAS_ETB == 1 } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the ".cpu" target # Create the ".cpu" target
target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
# Configure ETM and ETB # Configure ETM and ETB
etm config $_TARGETNAME 8 normal full etb etm config $_TARGETNAME 8 normal full etb
@ -53,7 +53,7 @@ if { $HAS_ETB == 1 } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the ".cpu" target # Create the ".cpu" target
target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
} }
arm7_9 dbgrq enable arm7_9 dbgrq enable

2
tcl/target/pxa270.cfg
View File

@ -44,7 +44,7 @@ jtag_ntrst_delay 250
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
# maps to PXA internal RAM. If you are using a PXA255 # maps to PXA internal RAM. If you are using a PXA255
# you must initialize SDRAM or leave this option off # you must initialize SDRAM or leave this option off
$_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0

2
tcl/target/pxa3xx.cfg
View File

@ -80,7 +80,7 @@ jtag newtap $_CHIPNAME cpu -irlen 11 -ircapture 0x1 -irmask 0x7f \
-expected-id $_CPUTAPID_PXA32X_C0 -expected-id $_CPUTAPID_PXA32X_C0
target create $_TARGETNAME xscale -endian $_ENDIAN \ target create $_TARGETNAME xscale -endian $_ENDIAN \
-chain-position $_TARGETNAME -variant pxa3xx -chain-position $_TARGETNAME
# work area in internal RAM. # work area in internal RAM.
$_TARGETNAME configure -work-area-phys 0x5c030000 -work-area-size 0x10000 $_TARGETNAME configure -work-area-phys 0x5c030000 -work-area-size 0x10000

2
tcl/target/samsung_s3c2410.cfg
View File

@ -27,7 +27,7 @@ reset_config trst_and_srst
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0 $_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0

2
tcl/target/samsung_s3c2440.cfg
View File

@ -26,7 +26,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 $_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1

2
tcl/target/samsung_s3c2450.cfg
View File

@ -36,7 +36,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
# FIX!!!!! should this really use srst_pulls_trst? # FIX!!!!! should this really use srst_pulls_trst?
# With srst_pulls_trst "reset halt" will not reset into the # With srst_pulls_trst "reset halt" will not reset into the

2
tcl/target/samsung_s3c6410.cfg
View File

@ -38,7 +38,7 @@ jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
adapter_nsrst_delay 500 adapter_nsrst_delay 500
jtag_ntrst_delay 500 jtag_ntrst_delay 500

2
tcl/target/smp8634.cfg
View File

@ -28,4 +28,4 @@ reset_config trst_and_srst separate
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant target create $_TARGETNAME mips_m4k -endian $_ENDIAN

2
tcl/target/str710.cfg
View File

@ -27,7 +27,7 @@ reset_config trst_and_srst srst_pulls_trst
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-start { adapter_khz 10 }
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {

2
tcl/target/str730.cfg
View File

@ -31,7 +31,7 @@ adapter_nsrst_delay 500
jtag_ntrst_delay 500 jtag_ntrst_delay 500
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-start { adapter_khz 10 }
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {

2
tcl/target/str750.cfg
View File

@ -33,7 +33,7 @@ adapter_nsrst_delay 500
jtag_ntrst_delay 500 jtag_ntrst_delay 500
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
$_TARGETNAME configure -event reset-start { adapter_khz 10 } $_TARGETNAME configure -event reset-start { adapter_khz 10 }
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {

2
tcl/target/str912.cfg
View File

@ -46,7 +46,7 @@ if { [info exists BSTAPID] } {
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -ignore-version jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -ignore-version
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-start { adapter_khz 16 } $_TARGETNAME configure -event reset-start { adapter_khz 16 }

2
tcl/target/test_reset_syntax_error.cfg
View File

@ -9,7 +9,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf
#target configuration #target configuration
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-init {

2
tcl/target/ti_calypso.cfg
View File

@ -42,7 +42,7 @@ jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# target # target
set _TARGETNAME $_CHIPNAME.arm set _TARGETNAME $_CHIPNAME.arm
target create $_TARGETNAME arm7tdmi -endian little -chain-position $_TARGETNAME -variant calypso target create $_TARGETNAME arm7tdmi -endian little -chain-position $_TARGETNAME
# workarea # workarea

2
testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg
View File

@ -23,7 +23,7 @@ reset_config srst_only srst_pulls_trst
jtag newtap at91 cpu -irlen 4 -irmask 0xf jtag newtap at91 cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false
target_script 0 reset .\prj\at91r40008_reset.script target_script 0 reset .\prj\at91r40008_reset.script

2
testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
View File

@ -21,7 +21,7 @@ reset_config trst_and_srst srst_pulls_trst
jtag newtap lpc cpu -irlen 4 -irmask 0xf jtag newtap lpc cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false
#flash bank lpc2000 <base> <size> 0 0 <target#> <variant> #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>

2
testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
View File

@ -21,7 +21,7 @@ reset_config trst_and_srst srst_pulls_trst
jtag newtap lpc cpu -irlen 4 -irmask 0xf jtag newtap lpc cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false
#flash configuration #flash configuration

2
testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
View File

@ -24,7 +24,7 @@ reset_config srst_only srst_pulls_trst
jtag newtap sam7 cpu -irlen 4 -irmask 0xf jtag newtap sam7 cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
target_script 0 reset .\prj\sam7s256_reset.script target_script 0 reset .\prj\sam7s256_reset.script

2
testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg
View File

@ -24,7 +24,7 @@ reset_config srst_only srst_pulls_trst
jtag newtap sam7 cpu -irlen 4 -irmask 0xf jtag newtap sam7 cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
target_script 0 reset .\prj\sam7x256_reset.script target_script 0 reset .\prj\sam7x256_reset.script

2
testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
View File

@ -21,7 +21,7 @@ reset_config trst_and_srst srst_pulls_trst
jtag newtap str7 cpu -irlen 4 -irmask 0xf jtag newtap str7 cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
#flash bank str7x <base> <size> 0 0 <target#> <variant> #flash bank str7x <base> <size> 0 0 <target#> <variant>

2
testing/examples/STR710Test/prj/str710_jtagkey.cfg
View File

@ -21,7 +21,7 @@ reset_config trst_and_srst srst_pulls_trst
jtag newtap str7 cpu -irlen 4 -irmask 0xf jtag newtap str7 cpu -irlen 4 -irmask 0xf
#target configuration #target configuration
target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
target_script 0 gdb_program_config .\prj\str710_program.script target_script 0 gdb_program_config .\prj\str710_program.script

2
testing/examples/STR912Test/prj/str912_jtagkey.cfg
View File

@ -26,7 +26,7 @@ jtag newtap str9 cpu -irlen 4 -irmask 0xf
jtag newtap str9 bs -irlen 5 jtag newtap str9 bs -irlen 5
#target configuration #target configuration
target create target0 arm966e -endian little -chain-position 1 -variant arm966e target create target0 arm966e -endian little -chain-position 1
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false [new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false
target_script 0 gdb_program_config .\prj\str912_program.script target_script 0 gdb_program_config .\prj\str912_program.script