- added svn props for newly added files

git-svn-id: svn://svn.berlios.de/openocd/trunk@789 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/startup.tcl

@@ -1,69 +1,69 @@
-#
-# Defines basic Tcl procs that must be there for
-# OpenOCD to work.
-#
-# Embedded into OpenOCD executable
-#
-
-# Production command
-# FIX!!! need to figure out how to feed back relevant output
-# from e.g. "flash banks" command...
-proc board_produce {filename serialnumber} {
-	openocd "reset init"
-	openocd "flash write_image erase $filename [flash] bin"]]
-	openocd "verify_image $filename [flash] bin"]]
-	echo "Successfully ran production procedure"
-}
-
-proc board_test {} {
-	echo "Production test not implemented"
-}
-
-# Show flash in human readable form
-# This is an example of a human readable form of a low level fn
-proc flash_banks_pretty {} { 
-	set i 0 	
-	set result ""
-	foreach {a} [flash_banks] {
-		if {$i > 0} {
-			set result "$result\n"
-		}
-		set result [format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i [lindex $a 0] [lindex $a 1] [lindex $a 2] [lindex $a 3] [lindex $a 4]]
-		set i [expr $i+1]	
-	}	
-	return $result
-}
-
-# We need to explicitly redirect this to the OpenOCD command
-# as Tcl defines the exit proc
-proc exit {} {
-	openocd_throw exit
-}
-
-# We have currently converted only "flash banks" to tcl.
-proc flash args {
-	if {[string compare [lindex $args 0] banks]==0} {
-		return [flash_banks_pretty]
-	}
-	openocd_throw "flash $args"
-}
-
-# If a fn is unknown to Tcl, we try to execute it as an OpenOCD command
-proc unknown {args} {
-	if {[string length $args]>0} {
-		set cmd ""
-		# We need to add back quotes for arguments w/space
-		# for args without space, we can add quotes anyway
-		foreach {a} $args {
-			set cmd "$cmd \"$a\""
-		}
-		openocd_throw $cmd
-	}
-	# openocd_throw outputs while running and also sets the
-	# primary return value to the output of the command
-	#
-	# The primary return value have been set by "openocd" above,
-	# so we need to clear it, lest we print out the output from
-	# the command twice.
-	return ""
-}
+#
+# Defines basic Tcl procs that must be there for
+# OpenOCD to work.
+#
+# Embedded into OpenOCD executable
+#
+
+# Production command
+# FIX!!! need to figure out how to feed back relevant output
+# from e.g. "flash banks" command...
+proc board_produce {filename serialnumber} {
+	openocd "reset init"
+	openocd "flash write_image erase $filename [flash] bin"]]
+	openocd "verify_image $filename [flash] bin"]]
+	echo "Successfully ran production procedure"
+}
+
+proc board_test {} {
+	echo "Production test not implemented"
+}
+
+# Show flash in human readable form
+# This is an example of a human readable form of a low level fn
+proc flash_banks_pretty {} { 
+	set i 0 	
+	set result ""
+	foreach {a} [flash_banks] {
+		if {$i > 0} {
+			set result "$result\n"
+		}
+		set result [format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i [lindex $a 0] [lindex $a 1] [lindex $a 2] [lindex $a 3] [lindex $a 4]]
+		set i [expr $i+1]	
+	}	
+	return $result
+}
+
+# We need to explicitly redirect this to the OpenOCD command
+# as Tcl defines the exit proc
+proc exit {} {
+	openocd_throw exit
+}
+
+# We have currently converted only "flash banks" to tcl.
+proc flash args {
+	if {[string compare [lindex $args 0] banks]==0} {
+		return [flash_banks_pretty]
+	}
+	openocd_throw "flash $args"
+}
+
+# If a fn is unknown to Tcl, we try to execute it as an OpenOCD command
+proc unknown {args} {
+	if {[string length $args]>0} {
+		set cmd ""
+		# We need to add back quotes for arguments w/space
+		# for args without space, we can add quotes anyway
+		foreach {a} $args {
+			set cmd "$cmd \"$a\""
+		}
+		openocd_throw $cmd
+	}
+	# openocd_throw outputs while running and also sets the
+	# primary return value to the output of the command
+	#
+	# The primary return value have been set by "openocd" above,
+	# so we need to clear it, lest we print out the output from
+	# the command twice.
+	return ""
+}