- rlink interface support from Lou Deluxe <lou.openocd012@fixit.nospammail.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1258 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
kc8apf
parent
e873a6d27c
commit
063f4c182c
11
configure.in
11
configure.in
|
|
@ -116,6 +116,10 @@ AC_ARG_ENABLE(jlink,
|
||||||
AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]),
|
AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]),
|
||||||
[build_jlink=$enableval], [build_jlink=no])
|
[build_jlink=$enableval], [build_jlink=no])
|
||||||
|
|
||||||
|
AC_ARG_ENABLE(rlink,
|
||||||
|
AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]),
|
||||||
|
[build_rlink=$enableval], [build_rlink=no])
|
||||||
|
|
||||||
AC_ARG_WITH(ftd2xx,
|
AC_ARG_WITH(ftd2xx,
|
||||||
[AS_HELP_STRING(--with-ftd2xx,
|
[AS_HELP_STRING(--with-ftd2xx,
|
||||||
[Where libftd2xx can be found <default=search>])],
|
[Where libftd2xx can be found <default=search>])],
|
||||||
|
|
@ -286,6 +290,12 @@ else
|
||||||
AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.])
|
AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.])
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
if test $build_rlink = yes; then
|
||||||
|
AC_DEFINE(BUILD_RLINK, 1, [1 if you want the RLink JTAG driver.])
|
||||||
|
else
|
||||||
|
AC_DEFINE(BUILD_RLINK, 0, [0 if you don't want the RLink JTAG driver.])
|
||||||
|
fi
|
||||||
|
|
||||||
AM_CONFIG_HEADER(config.h)
|
AM_CONFIG_HEADER(config.h)
|
||||||
AM_INIT_AUTOMAKE(openocd, 1.0)
|
AM_INIT_AUTOMAKE(openocd, 1.0)
|
||||||
|
|
||||||
|
|
@ -307,6 +317,7 @@ AM_CONDITIONAL(PRESTO_FTD2XX, test $build_presto_ftd2xx = yes)
|
||||||
AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
|
AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
|
||||||
AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
|
AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
|
||||||
AM_CONDITIONAL(JLINK, test $build_jlink = yes)
|
AM_CONDITIONAL(JLINK, test $build_jlink = yes)
|
||||||
|
AM_CONDITIONAL(RLINK, test $build_rlink = yes)
|
||||||
AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
|
AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
|
||||||
AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
|
AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
|
||||||
AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)
|
AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)
|
||||||
|
|
|
||||||
|
|
@ -218,6 +218,8 @@ build properly.}
|
||||||
@option{--enable-presto_ftd2xx}
|
@option{--enable-presto_ftd2xx}
|
||||||
@item
|
@item
|
||||||
@option{--enable-jlink}
|
@option{--enable-jlink}
|
||||||
|
@item
|
||||||
|
@option{--enable-rlink}
|
||||||
@end itemize
|
@end itemize
|
||||||
|
|
||||||
If you want to access the parallel port using the PPDEV interface you have to specify
|
If you want to access the parallel port using the PPDEV interface you have to specify
|
||||||
|
|
@ -322,6 +324,18 @@ AT91SAM764 internally.
|
||||||
@* Link: @url{http://www.iar.com/website1/1.0.1.0/369/1/index.php}
|
@* Link: @url{http://www.iar.com/website1/1.0.1.0/369/1/index.php}
|
||||||
@end itemize
|
@end itemize
|
||||||
|
|
||||||
|
@section USB RLINK based
|
||||||
|
Raisonance has an adapter called @b{RLink}. It exists in a stripped-down form on the STM32 Primer, permanently attached to the JTAG lines. It also exists on the STM32 Primer2, but that is wired for SWD and not JTAG, thus not supported.
|
||||||
|
|
||||||
|
@itemize @bullet
|
||||||
|
@item @b{Raisonance RLink}
|
||||||
|
@* Link: @url{http://www.raisonance.com/products/RLink.php}
|
||||||
|
@item @b{STM32 Primer}
|
||||||
|
@* Link: @url{http://www.stm32circle.com/resources/stm32primer.php}
|
||||||
|
@item @b{STM32 Primer2}
|
||||||
|
@* Link: @url{http://www.stm32circle.com/resources/stm32primer2.php}
|
||||||
|
@end itemize
|
||||||
|
|
||||||
@section USB Other
|
@section USB Other
|
||||||
@itemize @bullet
|
@itemize @bullet
|
||||||
@item @b{USBprog}
|
@item @b{USBprog}
|
||||||
|
|
@ -1017,6 +1031,11 @@ ft2232_vid_pid 0x0403 0xbdc8
|
||||||
# jlink interface
|
# jlink interface
|
||||||
interface jlink
|
interface jlink
|
||||||
@end verbatim
|
@end verbatim
|
||||||
|
@b{A Raisonance RLink}
|
||||||
|
@verbatim
|
||||||
|
# rlink interface
|
||||||
|
interface rlink
|
||||||
|
@end verbatim
|
||||||
@b{Parallel Port}
|
@b{Parallel Port}
|
||||||
@verbatim
|
@verbatim
|
||||||
interface parport
|
interface parport
|
||||||
|
|
@ -1066,6 +1085,9 @@ libusb.
|
||||||
|
|
||||||
@item @b{jlink}
|
@item @b{jlink}
|
||||||
@* Segger jlink usb adapter
|
@* Segger jlink usb adapter
|
||||||
|
|
||||||
|
@item @b{rlink}
|
||||||
|
@* Raisonance RLink usb adapter
|
||||||
@comment - End parameters
|
@comment - End parameters
|
||||||
@end itemize
|
@end itemize
|
||||||
@comment - End Interface
|
@comment - End Interface
|
||||||
|
|
@ -1247,6 +1269,7 @@ pre_reset and post_reset events.
|
||||||
@item ft2232: 6MHz / (@var{number}+1)
|
@item ft2232: 6MHz / (@var{number}+1)
|
||||||
@item amt jtagaccel: 8 / 2**@var{number}
|
@item amt jtagaccel: 8 / 2**@var{number}
|
||||||
@item jlink: maximum speed in kHz (0-12000), 0 will use RTCK
|
@item jlink: maximum speed in kHz (0-12000), 0 will use RTCK
|
||||||
|
@item rlink: 24MHz / @var{number}, but only for certain values of @var{number}
|
||||||
@comment end speed list.
|
@comment end speed list.
|
||||||
@end itemize
|
@end itemize
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -47,9 +47,13 @@ else
|
||||||
if JLINK
|
if JLINK
|
||||||
LIBUSB = -lusb
|
LIBUSB = -lusb
|
||||||
else
|
else
|
||||||
|
if RLINK
|
||||||
|
LIBUSB = -lusb
|
||||||
|
else
|
||||||
LIBUSB =
|
LIBUSB =
|
||||||
endif
|
endif
|
||||||
endif
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
if IS_WIN32
|
if IS_WIN32
|
||||||
if FTD2XXDIR
|
if FTD2XXDIR
|
||||||
|
|
|
||||||
|
|
@ -99,7 +99,13 @@ else
|
||||||
JLINKFILES =
|
JLINKFILES =
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
if RLINK
|
||||||
|
RLINKFILES = rlink/rlink.c rlink/rlink_speed_table.c
|
||||||
|
else
|
||||||
|
RLINKFILES =
|
||||||
|
endif
|
||||||
|
|
||||||
libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES) $(DUMMYFILES) $(FT2232FILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) \
|
libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES) $(DUMMYFILES) $(FT2232FILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) \
|
||||||
$(AT91RM9200FILES) $(GW16012FILES) $(BITQFILES) $(PRESTOFILES) $(USBPROGFILES) $(ECOSBOARDFILES) $(JLINKFILES)
|
$(AT91RM9200FILES) $(GW16012FILES) $(BITQFILES) $(PRESTOFILES) $(USBPROGFILES) $(ECOSBOARDFILES) $(JLINKFILES) $(RLINKFILES)
|
||||||
|
|
||||||
noinst_HEADERS = bitbang.h jtag.h
|
noinst_HEADERS = bitbang.h jtag.h
|
||||||
|
|
|
||||||
|
|
@ -196,6 +196,10 @@ static int hasKHz = 0;
|
||||||
extern jtag_interface_t jlink_interface;
|
extern jtag_interface_t jlink_interface;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if BUILD_RLINK == 1
|
||||||
|
extern jtag_interface_t rlink_interface;
|
||||||
|
#endif
|
||||||
|
|
||||||
jtag_interface_t *jtag_interfaces[] = {
|
jtag_interface_t *jtag_interfaces[] = {
|
||||||
#if BUILD_ECOSBOARD == 1
|
#if BUILD_ECOSBOARD == 1
|
||||||
&zy1000_interface,
|
&zy1000_interface,
|
||||||
|
|
@ -232,6 +236,9 @@ jtag_interface_t *jtag_interfaces[] = {
|
||||||
#endif
|
#endif
|
||||||
#if BUILD_JLINK == 1
|
#if BUILD_JLINK == 1
|
||||||
&jlink_interface,
|
&jlink_interface,
|
||||||
|
#endif
|
||||||
|
#if BUILD_RLINK == 1
|
||||||
|
&rlink_interface,
|
||||||
#endif
|
#endif
|
||||||
NULL,
|
NULL,
|
||||||
};
|
};
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,73 @@
|
||||||
|
#***************************************************************************
|
||||||
|
#* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
#* lou.openocd012@fixit.nospammail.net *
|
||||||
|
#* *
|
||||||
|
#* This program is free software; you can redistribute it and/or modify *
|
||||||
|
#* it under the terms of the GNU General Public License as published by *
|
||||||
|
#* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
#* (at your option) any later version. *
|
||||||
|
#* *
|
||||||
|
#* This program is distributed in the hope that it will be useful, *
|
||||||
|
#* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
#* GNU General Public License for more details. *
|
||||||
|
#* *
|
||||||
|
#* You should have received a copy of the GNU General Public License *
|
||||||
|
#* along with this program; if not, write to the *
|
||||||
|
#* Free Software Foundation, Inc., *
|
||||||
|
#* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
#***************************************************************************
|
||||||
|
|
||||||
|
TOP = ../../..
|
||||||
|
INTERFACE_NAME = rlink
|
||||||
|
|
||||||
|
PERL = perl
|
||||||
|
M4 = m4
|
||||||
|
|
||||||
|
TARGETDIR = ${TOP}/src/target
|
||||||
|
TOOLSDIR = ${TOP}/tools
|
||||||
|
|
||||||
|
MAKE_SPEED_TABLE = ${TOOLSDIR}/rlink_make_speed_table/rlink_make_speed_table
|
||||||
|
ST7_DTC_AS = ${TOOLSDIR}/st7_dtc_as/st7_dtc_as
|
||||||
|
|
||||||
|
OPENOCD = ${TOP}/src/openocd
|
||||||
|
OPENOCD_CONFIG = -s ${TARGETDIR}
|
||||||
|
OPENOCD_CONFIG += -f interface/rlink.cfg
|
||||||
|
OPENOCD_CONFIG += -f board/stm32f10x_128k_eval.cfg
|
||||||
|
|
||||||
|
PATCHFILE = /tmp/openocd_${INTERFACE_NAME}.diff.gz
|
||||||
|
|
||||||
|
# relative to ${TOP}
|
||||||
|
SVNADDFILES =
|
||||||
|
SVNADDFILES += src/target/interface/rlink.cfg
|
||||||
|
SVNADDFILES += src/jtag/${INTERFACE_NAME}.c
|
||||||
|
SVNADDFILES += src/jtag/${INTERFACE_NAME}
|
||||||
|
|
||||||
|
PRESCALERS = 64 11 8 2
|
||||||
|
|
||||||
|
DTCFILES =
|
||||||
|
DTCFILES += $(addsuffix _init.dtc, ${PRESCALERS})
|
||||||
|
DTCFILES += $(addsuffix _call.dtc, ${PRESCALERS})
|
||||||
|
|
||||||
|
default: rlink_speed_table.c clean
|
||||||
|
|
||||||
|
%_init.fsm: init.m4
|
||||||
|
${M4} -P -DSHIFTER_PRESCALER=`echo "$@" | sed -e's/_.*//'` $< > $@
|
||||||
|
|
||||||
|
%_call.fsm: call.m4
|
||||||
|
${M4} -P -DSHIFTER_PRESCALER=`echo "$@" | sed -e's/_.*//'` $< > $@
|
||||||
|
|
||||||
|
%.dtc: %.fsm
|
||||||
|
${ST7_DTC_AS} -b -o $@ -i $< > /dev/null
|
||||||
|
|
||||||
|
rlink_speed_table.c: ${DTCFILES}
|
||||||
|
${MAKE_SPEED_TABLE} ${PRESCALERS} > $@ || rm $@
|
||||||
|
|
||||||
|
clean:
|
||||||
|
-rm *.dtc *.fsm
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
|
||||||
|
test: default
|
||||||
|
(cd ${TOP} && (rm src/jtag/${INTERFACE_NAME}.o; ${MAKE}))
|
||||||
|
${OPENOCD} -d0 ${OPENOCD_CONFIG} -c init -c 'poll off'
|
||||||
|
|
@ -0,0 +1,485 @@
|
||||||
|
m4_divert(`-1')
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
m4_dnl Setup and hold times depend on SHIFTER_PRESCALER
|
||||||
|
m4_define(`SETUP_DELAY_CYCLES', m4_eval(`('SHIFTER_PRESCALER` + 1) / 2'))
|
||||||
|
m4_define(`HOLD_DELAY_CYCLES', m4_eval(`'SHIFTER_PRESCALER` / 2'))
|
||||||
|
|
||||||
|
m4_dnl Some macros to make nybble handling a little easier
|
||||||
|
m4_define(`m4_high_nybble', `m4_eval(`(($1) >> 4) & 0xf')')
|
||||||
|
m4_define(`m4_low_nybble', `m4_eval(`($1) & 0xf')')
|
||||||
|
|
||||||
|
m4_dnl A macro to generate a number of NOPs depending on the argument
|
||||||
|
m4_define(`m4_0_to_5_nops', `m4_ifelse(m4_eval(`($1) >= 1'), 1, ` NOP
|
||||||
|
'm4_ifelse(m4_eval(`($1) >= 2'), 1, ` NOP
|
||||||
|
'm4_ifelse(m4_eval(`($1) >= 3'), 1, ` NOP
|
||||||
|
'm4_ifelse(m4_eval(`($1) >= 4'), 1, ` NOP
|
||||||
|
'm4_ifelse(m4_eval(`($1) >= 5'), 1, ` NOP
|
||||||
|
')))))')
|
||||||
|
|
||||||
|
|
||||||
|
m4_dnl Some macros to facilitate bit-banging delays.
|
||||||
|
m4_dnl There are 3 of them. One for self-contained delays, and two for those which must be split between setup and loop to keep from disturbing A at delay time.
|
||||||
|
m4_dnl The argument passed to any of them is the number of cycles which the delay should consume.
|
||||||
|
|
||||||
|
m4_dnl This one is self-contained.
|
||||||
|
|
||||||
|
m4_define(`m4_delay',
|
||||||
|
`; delay (m4_eval($1) cycles)'
|
||||||
|
`m4_ifelse(m4_eval(`('$1`) < 6'), 1,
|
||||||
|
m4_0_to_5_nops($1)
|
||||||
|
,
|
||||||
|
m4_ifelse(m4_eval(`(('$1`) - 3) % 2'), 1, ` NOP')
|
||||||
|
A.H = m4_high_nybble(`(('$1`) - 3) / 2')
|
||||||
|
A.L = m4_low_nybble(`(('$1`) - 3) / 2')
|
||||||
|
Y = A
|
||||||
|
DECY
|
||||||
|
JP -1
|
||||||
|
)')
|
||||||
|
|
||||||
|
|
||||||
|
m4_dnl These are the setup and loop parts of the split delay.
|
||||||
|
m4_dnl The argument passed to both must match for the result to make sense.
|
||||||
|
m4_dnl The setup does not figure into the delay. It takes 3 cycles when a loop is used and none if nops are used.
|
||||||
|
|
||||||
|
m4_define(`m4_delay_setup',
|
||||||
|
`; delay setup (m4_eval($1) cycles)'
|
||||||
|
`m4_ifelse(m4_eval(`('$1`) < 6'), 0, ` '
|
||||||
|
A.H = m4_high_nybble(`('$1`) / 2')
|
||||||
|
A.L = m4_low_nybble(`('$1`) / 2')
|
||||||
|
Y = A
|
||||||
|
)')
|
||||||
|
|
||||||
|
m4_define(`m4_delay_loop',
|
||||||
|
`; delay loop (m4_eval($1) cycles)'
|
||||||
|
`m4_ifelse(m4_eval(`('$1`) < 6'), 1,
|
||||||
|
m4_0_to_5_nops($1)
|
||||||
|
,
|
||||||
|
m4_ifelse(m4_eval(`('$1`) % 2'), 1, ` NOP')
|
||||||
|
DECY
|
||||||
|
JP -1
|
||||||
|
)')
|
||||||
|
|
||||||
|
m4_dnl These are utility macros for use with delays. Specifically, there is code below which needs some predictability in code size for relative jumps to reach. The m4_delay macro generates an extra NOP when an even delay is needed, and the m4_delay_loop macro generates an extra NOP when an odd delay is needed. Using this for the argument to the respective macro rounds up the argument so that the extra NOP will not be generated. There is also logic built in to cancel the rounding when the result is small enough that a loop would not be generated.
|
||||||
|
|
||||||
|
m4_define(`m4_delay_loop_round_up', `m4_ifelse(m4_eval($1` < 6'), 1, $1, m4_eval(`(('$1`) + 1) / 2 * 2'))')
|
||||||
|
m4_define(`m4_delay_round_up', `m4_ifelse(m4_eval($1` < 6'), 1, $1, m4_eval(`(('$1`) / 2 * 2) + 1'))')
|
||||||
|
|
||||||
|
|
||||||
|
m4_divert(`0')m4_dnl
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_error
|
||||||
|
; This is at address 0x00 in case of empty LUT entries
|
||||||
|
STATUS STOP ERROR
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; Command interpreter at address 0x01 because it is branched to a lot and having it be 0x01 means we can use X for it, which is already used for other purposes which want it to be 1.
|
||||||
|
; Assumes X is 1
|
||||||
|
; Assumes ADR_BUFFER0 points to the next command byte
|
||||||
|
; Stores the current command byte in CMP01
|
||||||
|
|
||||||
|
:command_interpreter
|
||||||
|
A = DATA_BUFFER0
|
||||||
|
ADR_BUFFER0 += X
|
||||||
|
CMP01 = A ; store the current command for later
|
||||||
|
|
||||||
|
EXCHANGE ; put MSN into LSN
|
||||||
|
A.H = 0xc ; lookup table at 0x1550 + 0xc0 = 0x1610
|
||||||
|
|
||||||
|
; branch to address in lookup table
|
||||||
|
Y = A
|
||||||
|
A = <Y>
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; LUT for high nybble
|
||||||
|
|
||||||
|
;LUT; c0 opcode_error
|
||||||
|
;LUT; c1 opcode_shift_tdi_andor_tms_bytes
|
||||||
|
;LUT; c2 opcode_shift_tdi_andor_tms_bytes
|
||||||
|
;LUT; c3 opcode_shift_tdi_andor_tms_bytes
|
||||||
|
;LUT; c4 opcode_shift_tdo_bytes
|
||||||
|
;LUT; c5 opcode_error
|
||||||
|
;LUT; c6 opcode_shift_tdio_bytes
|
||||||
|
;LUT; c7 opcode_error
|
||||||
|
;LUT; c8 opcode_shift_tms_tdi_bit_pair
|
||||||
|
;LUT; c9 opcode_shift_tms_bits
|
||||||
|
;LUT; ca opcode_error
|
||||||
|
;LUT; cb opcode_error
|
||||||
|
;LUT; cc opcode_error
|
||||||
|
;LUT; cd opcode_error
|
||||||
|
;LUT; ce opcode_shift_tdio_bits
|
||||||
|
;LUT; cf opcode_stop
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; USB/buffer handling
|
||||||
|
;
|
||||||
|
|
||||||
|
;ENTRY; download entry_download
|
||||||
|
|
||||||
|
opcode_stop:
|
||||||
|
opcode_next_buffer:
|
||||||
|
; pointer to completion flag
|
||||||
|
A.H = 0xf
|
||||||
|
A.L = 0xf
|
||||||
|
Y = A
|
||||||
|
|
||||||
|
A = OR_MPEG ; buffer indicator from previous iteration
|
||||||
|
<Y> = A ; either indicator will have bit 0 set
|
||||||
|
BSET 1 ; was buffer 1 previously current?
|
||||||
|
; A.H = 0 ; already zero from OR_MPEG
|
||||||
|
JP opcode_next_buffer_0
|
||||||
|
|
||||||
|
opcode_next_buffer_1:
|
||||||
|
A.L = 0x1 ; ack buffer 0
|
||||||
|
BUFFER_MNGT = A
|
||||||
|
; A.H = 0x0 ; already zero from BUFFER_MNGT
|
||||||
|
A.L = 0x3 ; Input buffer 1 = 0x1850 (0x0300)
|
||||||
|
JP +4
|
||||||
|
|
||||||
|
opcode_next_buffer_0:
|
||||||
|
A.L = 0x2 ; ack buffer 1
|
||||||
|
BUFFER_MNGT = A
|
||||||
|
entry_download:
|
||||||
|
A = X ; Input buffer 0 = 0x1650 (0x0100)
|
||||||
|
|
||||||
|
ADR_BUFFER01 = A
|
||||||
|
OR_MPEG = A ; store for next iteration
|
||||||
|
|
||||||
|
A.L = 0x0
|
||||||
|
BUFFER_MNGT = A ; finish acking previous buffer
|
||||||
|
Y = A
|
||||||
|
ADR_BUFFER00 = A
|
||||||
|
ADR_BUFFER11 = A
|
||||||
|
|
||||||
|
A.H = 0x4 ; Output buffer = 0x1590 (0x0040)
|
||||||
|
ADR_BUFFER10 = A
|
||||||
|
|
||||||
|
EXCHANGE ; 0x04
|
||||||
|
X = A ; for the spin loop below
|
||||||
|
|
||||||
|
; pointer to status in shared memory
|
||||||
|
DECY ; setting to 0 above and decrementing here saves a byte
|
||||||
|
|
||||||
|
; wait until a command buffer is available
|
||||||
|
A = BUFFER_MNGT ; spin while neither of bits 2 or 3 are set
|
||||||
|
CP A<X ; this is slightly faster and smaller than trying to AND and compare the result, and it lets us just use the nybble-swapped 0x40 from the output buffer setup.
|
||||||
|
JP -2
|
||||||
|
<Y> = A ; update status once done spinning
|
||||||
|
|
||||||
|
; restore X, since we used it
|
||||||
|
; A.H = 0 ; high nybble of BUFFER_MNGT will always be 0 the way we use it
|
||||||
|
A.L = 1
|
||||||
|
X = A
|
||||||
|
|
||||||
|
; go to command interpreter
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;;------------------------------------------------------------------------------
|
||||||
|
;:opcode_stop
|
||||||
|
;;
|
||||||
|
;
|
||||||
|
; ; Ack buffer 0 in download mode
|
||||||
|
; A.L = 0x1
|
||||||
|
; BUFFER_MNGT = A
|
||||||
|
;
|
||||||
|
; STATUS STOP
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tdi_andor_tms_bytes
|
||||||
|
;
|
||||||
|
|
||||||
|
A = CMP01 ; bits 3..0 contain the number of bytes to shift - 1
|
||||||
|
A.H = 0
|
||||||
|
Y = A ; loop counter
|
||||||
|
|
||||||
|
A = CMP01
|
||||||
|
EXCHANGE
|
||||||
|
CMP01 = A ; we're interested in bits in the high nybble
|
||||||
|
|
||||||
|
opcode_shift_tdi_andor_tms_bytes__loop:
|
||||||
|
|
||||||
|
; set tdi to supplied byte or zero
|
||||||
|
A = CMP01
|
||||||
|
BSET 1
|
||||||
|
JP +4
|
||||||
|
A.H = 0
|
||||||
|
A.L = 0
|
||||||
|
JP +3
|
||||||
|
A = DATA_BUFFER0
|
||||||
|
ADR_BUFFER0 += X
|
||||||
|
SHIFT_MPEG = A
|
||||||
|
|
||||||
|
; set tms to supplied byte or zero
|
||||||
|
A = CMP01
|
||||||
|
BCLR 0
|
||||||
|
JP +5
|
||||||
|
A = DATA_BUFFER0
|
||||||
|
ADR_BUFFER0 += X
|
||||||
|
SHIFT_CARD = A
|
||||||
|
SHIFT CARD OUT=>PIN0
|
||||||
|
|
||||||
|
; run both shifters as nearly simultaneously as possible
|
||||||
|
SHIFT MPEG OUT=>PIN1
|
||||||
|
|
||||||
|
A = CTRL_FCI
|
||||||
|
EXCHANGE
|
||||||
|
BCLR 3
|
||||||
|
JP -3
|
||||||
|
|
||||||
|
DECY
|
||||||
|
JP opcode_shift_tdi_andor_tms_bytes__loop
|
||||||
|
|
||||||
|
A = X
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tdo_bytes
|
||||||
|
;
|
||||||
|
|
||||||
|
A = CMP01 ; bits 3..0 contain the number of bytes to shift - 1
|
||||||
|
A.H = 0
|
||||||
|
Y = A ; loop counter
|
||||||
|
|
||||||
|
opcode_shift_tdo_bytes__loop:
|
||||||
|
SHIFT MPEG PIN0=>IN
|
||||||
|
|
||||||
|
A = CTRL_FCI
|
||||||
|
EXCHANGE
|
||||||
|
BCLR 3
|
||||||
|
JP -3
|
||||||
|
|
||||||
|
; put shifted byte into output buffer
|
||||||
|
A = SHIFT_MPEG
|
||||||
|
DATA_BUFFER1 = A
|
||||||
|
ADR_BUFFER1 += X
|
||||||
|
|
||||||
|
DECY
|
||||||
|
JP opcode_shift_tdo_bytes__loop
|
||||||
|
|
||||||
|
A = X
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tdio_bytes
|
||||||
|
;
|
||||||
|
|
||||||
|
A = CMP01 ; bits 3..0 contain the number of bytes to shift - 1
|
||||||
|
A.H = 0
|
||||||
|
CMP10 = A ; byte loop counter
|
||||||
|
|
||||||
|
A.H = opcode_shift_tdio_bytes__sub_return
|
||||||
|
A.L = opcode_shift_tdio_bytes__sub_return
|
||||||
|
CMP00 = A ; return address
|
||||||
|
|
||||||
|
opcode_shift_tdio_bytes__loop:
|
||||||
|
A.H = 0
|
||||||
|
A.L = 7
|
||||||
|
CMP11 = A ; always use 8 bits
|
||||||
|
|
||||||
|
JP sub_shift_tdio_bits
|
||||||
|
opcode_shift_tdio_bytes__sub_return:
|
||||||
|
|
||||||
|
A = CMP10 ; byte loop counter
|
||||||
|
CP A=>X
|
||||||
|
CLC
|
||||||
|
A -= X
|
||||||
|
CMP10 = A
|
||||||
|
JP opcode_shift_tdio_bytes__loop
|
||||||
|
|
||||||
|
A = X
|
||||||
|
;DR_MPEG = A ; return TCK low, as str912 reset halt seems to require it
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tdio_bits
|
||||||
|
;
|
||||||
|
|
||||||
|
A = CMP01 ; bits 2..0 contain the number of bits to shift - 1
|
||||||
|
A.H = 0
|
||||||
|
BCLR 3 ; set TMS=1 if bit 3 was set
|
||||||
|
CMP11 = A ; bit loop counter
|
||||||
|
|
||||||
|
A.H = opcode_shift_tdio_bits__sub_return
|
||||||
|
A.L = opcode_shift_tdio_bits__sub_return
|
||||||
|
CMP00 = A ; return address
|
||||||
|
|
||||||
|
JP sub_shift_tdio_bits
|
||||||
|
A.L = 0x1 ; TMS=1
|
||||||
|
DR_CARD = A
|
||||||
|
JP sub_shift_tdio_bits
|
||||||
|
opcode_shift_tdio_bits__sub_return:
|
||||||
|
|
||||||
|
A = X
|
||||||
|
;DR_MPEG = A ; return TCK low, as str912 reset halt seems to require it
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:sub_shift_tdio_bits
|
||||||
|
;
|
||||||
|
|
||||||
|
A = DATA_BUFFER0 ; get byte from input buffer
|
||||||
|
ADR_BUFFER0 += X
|
||||||
|
MASK = A ; put it in MASK where bit routine will use it
|
||||||
|
|
||||||
|
:sub_shift_tdio_bits__loop
|
||||||
|
m4_delay_setup(m4_delay_loop_round_up(SETUP_DELAY_CYCLES - 1))
|
||||||
|
|
||||||
|
A = MASK ; shift TDO into and TDI out of MASK via carry
|
||||||
|
A += MASK
|
||||||
|
MASK = A
|
||||||
|
|
||||||
|
; shifting out TDI
|
||||||
|
A.L = 0x2 ; TCK=0, TDI=1
|
||||||
|
CP CARRY
|
||||||
|
JP +2
|
||||||
|
A.L = 0x0 ; TCK=0, TDI=0
|
||||||
|
DR_MPEG = A
|
||||||
|
|
||||||
|
m4_delay_loop(m4_delay_loop_round_up(SETUP_DELAY_CYCLES - 1))
|
||||||
|
|
||||||
|
BSET 2 ; TCK high
|
||||||
|
DR_MPEG = A
|
||||||
|
|
||||||
|
A = DR_MPEG ; set carry bit to TDO
|
||||||
|
CLC
|
||||||
|
BCLR 0
|
||||||
|
JP +2
|
||||||
|
SEC
|
||||||
|
|
||||||
|
m4_delay(HOLD_DELAY_CYCLES - 10)
|
||||||
|
|
||||||
|
A = CMP11 ; bit loop counter
|
||||||
|
Y = A ; use Y to avoid corrupting carry bit with subtract
|
||||||
|
DECY
|
||||||
|
A = Y
|
||||||
|
CMP11 = A
|
||||||
|
JP :sub_shift_tdio_bits__loop
|
||||||
|
|
||||||
|
; shift last TDO bit into result
|
||||||
|
A = MASK
|
||||||
|
A += MASK
|
||||||
|
DATA_BUFFER1 = A
|
||||||
|
ADR_BUFFER1 += X
|
||||||
|
|
||||||
|
A = CMP00 ; return to caller
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tms_tdi_bit_pair
|
||||||
|
;
|
||||||
|
|
||||||
|
; set TMS line manually
|
||||||
|
A = CMP01 ; bits 3..0 contain TDI and TMS bits and whether to return TDO
|
||||||
|
BSET 0 ; TMS bit
|
||||||
|
A.L = 0x1 ; TMS=1
|
||||||
|
JP +2
|
||||||
|
A.L = 0x0 ; TMS=0
|
||||||
|
DR_CARD = A
|
||||||
|
|
||||||
|
; stuff command buffer with bitmap of single TDI bit
|
||||||
|
A = CMP01
|
||||||
|
BSET 1 ; TDI bit
|
||||||
|
A.H = 0x8 ; TDI=1
|
||||||
|
JP +2
|
||||||
|
A.H = 0x0 ; TDI=0
|
||||||
|
ADR_BUFFER0 -= X
|
||||||
|
DATA_BUFFER0 = A
|
||||||
|
|
||||||
|
A.H = 0
|
||||||
|
A.L = 0
|
||||||
|
CMP11 = A ; bit loop counter (only doing one bit)
|
||||||
|
|
||||||
|
A.H = opcode_shift_tms_tdi_bit_pair__sub_return
|
||||||
|
A.L = opcode_shift_tms_tdi_bit_pair__sub_return
|
||||||
|
CMP00 = A ; return address
|
||||||
|
|
||||||
|
; jump this way due to relative jump range issues
|
||||||
|
A.H = sub_shift_tdio_bits
|
||||||
|
A.L = sub_shift_tdio_bits
|
||||||
|
BRANCH
|
||||||
|
opcode_shift_tms_tdi_bit_pair__sub_return:
|
||||||
|
|
||||||
|
A = CMP01
|
||||||
|
BSET 3 ; bit says whether to return TDO
|
||||||
|
JP +2
|
||||||
|
ADR_BUFFER1 -= X ; subroutine returns it, so undo that
|
||||||
|
|
||||||
|
A = X
|
||||||
|
DR_MPEG = A ; return TCK low, as str912 reset halt seems to require it
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
:opcode_shift_tms_bits
|
||||||
|
;
|
||||||
|
|
||||||
|
A = CMP01 ; bits 3..0 contain the number of bits to shift - 1 (only 1-8 bits is valid... no checking, just improper operation)
|
||||||
|
A.H = 0
|
||||||
|
CMP11 = A ; bit loop counter
|
||||||
|
|
||||||
|
A = DATA_BUFFER0 ; get byte from input buffer
|
||||||
|
ADR_BUFFER0 += X
|
||||||
|
MASK = A ; The byte we'll be shifting
|
||||||
|
|
||||||
|
:opcode_shift_tms_bits__loop
|
||||||
|
m4_delay_setup(SETUP_DELAY_CYCLES - 1)
|
||||||
|
|
||||||
|
A = MASK ; shift TMS out of MASK via carry
|
||||||
|
A += MASK
|
||||||
|
MASK = A
|
||||||
|
|
||||||
|
; shifting out TMS
|
||||||
|
A.L = 0x1 ; TCK=0, TDI=0, TMS=1
|
||||||
|
CP CARRY
|
||||||
|
JP +2
|
||||||
|
A.L = 0x0 ; TCK=0, TDI=0, TMS=0
|
||||||
|
DR_CARD = A
|
||||||
|
DR_MPEG = A
|
||||||
|
|
||||||
|
m4_delay_loop(SETUP_DELAY_CYCLES - 1)
|
||||||
|
|
||||||
|
BSET 2 ; TCK high
|
||||||
|
DR_MPEG = A
|
||||||
|
|
||||||
|
m4_delay(HOLD_DELAY_CYCLES - 10)
|
||||||
|
|
||||||
|
A = CMP11 ; bit loop counter
|
||||||
|
CP A=>X
|
||||||
|
CLC
|
||||||
|
A -= X
|
||||||
|
CMP11 = A
|
||||||
|
JP :opcode_shift_tms_bits__loop
|
||||||
|
|
||||||
|
A = X
|
||||||
|
DR_MPEG = A ; return TCK low, as str912 reset halt seems to require it
|
||||||
|
BRANCH
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,66 @@
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
/* A command position with the high nybble of 0x0 is reserved for an error condition. If executed, it stops the DTC and raises the ERROR flag */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TMS_BYTES(bytes) ((0x1 << 4) | ((bytes) - 1))
|
||||||
|
/* Shift 1-16 bytes out TMS. TDI is 0. */
|
||||||
|
/* Bytes to shift follow. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TDI_BYTES(bytes) ((0x2 << 4) | ((bytes) - 1))
|
||||||
|
/* Shift 1-16 bytes out TDI. TMS is 0. */
|
||||||
|
/* Bytes to shift follow. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TDI_AND_TMS_BYTES(bytes) ((0x3 << 4) | ((bytes) - 1))
|
||||||
|
/* Shift 1-16 byte pairs out TDI and TMS. */
|
||||||
|
/* Byte pairs to shift follow in TDI, TMS order. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TDO_BYTES(bytes) ((0x4 << 4) | ((bytes) - 1))
|
||||||
|
/* Shift 1-16 bytes in TDO. TMS is unaffected. */
|
||||||
|
/* Reply buffer contains bytes shifted in. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TDIO_BYTES(bytes) ((0x6 << 4) | ((bytes) - 1))
|
||||||
|
/* Shift 1-16 bytes out TDI and in TDO. TMS is unaffected. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TMS_TDI_BIT_PAIR(tms, tdi, tdo) ((0x8 << 4) | ( \
|
||||||
|
(tms) ? (1 << 0) : 0 \
|
||||||
|
) | ( \
|
||||||
|
(tdi) ? (1 << 1) : 0 \
|
||||||
|
) | ( \
|
||||||
|
(tdo) ? (1 << 3) : 0 \
|
||||||
|
))
|
||||||
|
/* Single bit shift. */
|
||||||
|
/* tms and tdi are the levels shifted out on TMS and TDI, respectively. */
|
||||||
|
/* tdo indicates whether a byte will be returned in the reply buffer with its least significant bit set to reflect TDO */
|
||||||
|
/* Care should be taken when tdo is zero, as the underlying code actually does put that byte in the reply buffer. Setting tdo to zero just moves the pointer back. The result is that if this command is executed when the reply buffer is already full, a byte will be written erroneously to memory not belonging to the reply buffer. This could be worked around at the expense of DTC code space and speed. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TMS_BITS(bits) ((0x9 << 4) | ((bits) - 1))
|
||||||
|
/* Shift 1-8 bits out TMS. */
|
||||||
|
/* Bits to be shifted out are left justified in the following byte. */
|
||||||
|
|
||||||
|
#define DTC_CMD_SHIFT_TDIO_BITS(bits) ((0xe << 4) | ((bits) - 1))
|
||||||
|
/* Shift 1-8 bits out TDI and in TDO, TMS is unaffected. */
|
||||||
|
/* Bits to be shifted out are left justified in the following byte. */
|
||||||
|
/* Bits shifted in are right justified in the byte placed in the reply buffer. */
|
||||||
|
|
||||||
|
|
||||||
|
#define DTC_CMD_STOP (0xf << 4)
|
||||||
|
/* Stop processing the command buffer and wait for the next one. */
|
||||||
|
/* A shared status byte is updated with bit 0 set when this has happened, and it is cleared when a new command buffer becomes ready. The host can poll that byte to see when it is safe to read a reply. */
|
||||||
|
|
@ -0,0 +1,57 @@
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Command opcodes that can be sent over endpoint 1.
|
||||||
|
* This codifies information provided by Rob Brown <rob@cobbleware.com>.
|
||||||
|
* The buffer can contain several of these, but only one which returns data.
|
||||||
|
* Some of these opcodes have arguments, which follow immediately.
|
||||||
|
* If shorter than the packet size, trailing positions should be zero-filled.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* LED update enables:
|
||||||
|
* When enabled, each LED is updated automatically.
|
||||||
|
* When not enabled, each LED can be controlled manually with EP1_CMD_SET_PORTD_LEDS.
|
||||||
|
*/
|
||||||
|
#define EP1_CMD_LEDUE_BOTH (0x05)
|
||||||
|
/* EP1_CMD_LEDUE_NONE has the side effect of turning the LEDs on */
|
||||||
|
#define EP1_CMD_LEDUE_NONE (0x06)
|
||||||
|
#define EP1_CMD_LEDUE_ERROR (0x17)
|
||||||
|
#define EP1_CMD_LEDUE_BUSY (0x18)
|
||||||
|
|
||||||
|
#define EP1_CMD_DTC_STOP (0x0b)
|
||||||
|
#define EP1_CMD_DTC_LOAD (0x0c)
|
||||||
|
#define EP1_CMD_DTC_CALL (0x0d)
|
||||||
|
#define EP1_CMD_SET_UPLOAD (0x0f)
|
||||||
|
#define EP1_CMD_SET_DOWNLOAD (0x10)
|
||||||
|
#define EP1_CMD_DTC_WAIT (0x12)
|
||||||
|
#define EP1_CMD_DTC_GET_STATUS (0x15)
|
||||||
|
/* a quick way to just read back one byte */
|
||||||
|
#define EP1_CMD_DTC_GET_CACHED_STATUS (0x16)
|
||||||
|
|
||||||
|
/* Writes upper 2 bits port D with argument */
|
||||||
|
#define EP1_CMD_SET_PORTD_UPPER (0x19)
|
||||||
|
/* Writes lower 2 bits (BUSY and ERROR) of port D with argument */
|
||||||
|
#define EP1_CMD_SET_PORTD_LEDS (0x1a)
|
||||||
|
|
||||||
|
#define EP1_CMD_MEMORY_READ (0x28)
|
||||||
|
#define EP1_CMD_MEMORY_WRITE (0x29)
|
||||||
|
#define EP1_CMD_GET_FWREV (0xfe)
|
||||||
|
#define EP1_CMD_GET_SERIAL (0xff)
|
||||||
|
|
@ -0,0 +1,74 @@
|
||||||
|
m4_divert(`-1')
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
m4_undefine(`CTRL_MPEG_L')
|
||||||
|
m4_undefine(`CTRL_CARD_L')
|
||||||
|
|
||||||
|
m4_ifelse(SHIFTER_PRESCALER, 1, `
|
||||||
|
m4_define(`CTRL_MPEG_L', `m4_eval(`0x8 | 0x0')')
|
||||||
|
')
|
||||||
|
m4_ifelse(SHIFTER_PRESCALER, 2, `
|
||||||
|
m4_define(`CTRL_MPEG_L', `m4_eval(`0x8 | 0x2')')
|
||||||
|
m4_define(`CTRL_CARD_L', `m4_eval(`0x8 | 0x1')')
|
||||||
|
')
|
||||||
|
m4_ifelse(SHIFTER_PRESCALER, 8, `
|
||||||
|
m4_define(`CTRL_MPEG_L', `m4_eval(`0x8 | 0x3')')
|
||||||
|
')
|
||||||
|
m4_ifelse(SHIFTER_PRESCALER, 11, `
|
||||||
|
m4_define(`CTRL_MPEG_L', `m4_eval(`0x8 | 0x4')')
|
||||||
|
')
|
||||||
|
m4_ifelse(SHIFTER_PRESCALER, 64, `
|
||||||
|
m4_define(`CTRL_MPEG_L', `m4_eval(`0x8 | 0x7')')
|
||||||
|
')
|
||||||
|
|
||||||
|
m4_ifdef(`CTRL_MPEG_L',,`
|
||||||
|
m4_errprint(`SHIFTER_PRESCALER was not defined with a supported value
|
||||||
|
') m4_m4exit(`1')
|
||||||
|
')
|
||||||
|
|
||||||
|
m4_divert(`0')m4_dnl
|
||||||
|
|
||||||
|
init:
|
||||||
|
A.H = 0
|
||||||
|
|
||||||
|
A.L = 0
|
||||||
|
|
||||||
|
DR_MPEG = A ; TDI and TCK start out low
|
||||||
|
DR_CARD = A ; TMS starts out low
|
||||||
|
|
||||||
|
A.L = 0x6
|
||||||
|
|
||||||
|
CTRL_FCI = A ; MPEG and CARD driven by FCI
|
||||||
|
DDR_MPEG = A ; TDI and TCK are outputs
|
||||||
|
|
||||||
|
A.L = 0x1
|
||||||
|
|
||||||
|
X = A ; X == 1
|
||||||
|
DDR_CARD = A ; TMS is output
|
||||||
|
|
||||||
|
A.L = CTRL_MPEG_L
|
||||||
|
CTRL_MPEG = A
|
||||||
|
m4_ifdef(`CTRL_CARD_L',
|
||||||
|
` A.L = 'CTRL_CARD_L`
|
||||||
|
')m4_dnl
|
||||||
|
CTRL_CARD = A
|
||||||
|
|
||||||
|
STATUS STOP
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,33 @@
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
#include "types.h"
|
||||||
|
#include <sys/types.h>
|
||||||
|
|
||||||
|
typedef
|
||||||
|
struct rlink_speed_table_s {
|
||||||
|
u8 const *dtc;
|
||||||
|
u16 dtc_size;
|
||||||
|
u16 khz;
|
||||||
|
u8 prescaler;
|
||||||
|
} rlink_speed_table_t;
|
||||||
|
|
||||||
|
extern const rlink_speed_table_t rlink_speed_table[];
|
||||||
|
extern const size_t rlink_speed_table_size;
|
||||||
|
|
@ -0,0 +1,98 @@
|
||||||
|
/* This file was created automatically by ../../../tools/rlink_make_speed_table/rlink_make_speed_table.pl. */
|
||||||
|
|
||||||
|
#include "rlink.h"
|
||||||
|
#include "st7.h"
|
||||||
|
|
||||||
|
static const u8 dtc_64[] = {
|
||||||
|
0, 2, 68, 84, 67, 2, 13, 160, 176, 151, 147, 182, 141, 152, 177, 129, 148,
|
||||||
|
191, 143, 142, 5, 3, 0, 0, 0, 2, 68, 84, 67, 4, 0, 192, 5, 15, 0, 42, 42,
|
||||||
|
42, 73, 0, 88, 0, 160, 189, 0, 0, 0, 0, 106, 9, 1, 8, 22, 100, 111, 119,
|
||||||
|
110, 108, 111, 97, 100, 2, 226, 7, 219, 39, 137, 51, 172, 130, 192, 96,
|
||||||
|
175, 191, 130, 217, 128, 57, 69, 177, 159, 179, 68, 178, 159, 193, 133,
|
||||||
|
153, 176, 159, 130, 132, 135, 164, 134, 51, 129, 60, 223, 9, 98, 128, 177,
|
||||||
|
129, 96, 201, 160, 130, 201, 51, 137, 201, 57, 68, 160, 176, 67, 219, 39,
|
||||||
|
154, 201, 40, 69, 219, 39, 150, 17, 27, 205, 51, 43, 99, 60, 118, 193,
|
||||||
|
96, 201, 160, 130, 24, 205, 51, 43, 99, 218, 156, 47, 60, 105, 193, 96,
|
||||||
|
201, 160, 138, 166, 178, 136, 160, 183, 139, 86, 202, 8, 2, 36, 138, 105,
|
||||||
|
193, 96, 201, 160, 43, 139, 167, 181, 136, 70, 177, 147, 67, 193, 96, 219,
|
||||||
|
39, 131, 161, 176, 130, 195, 53, 131, 178, 10, 66, 176, 151, 60, 97, 58,
|
||||||
|
151, 215, 2, 40, 66, 1, 0, 160, 185, 130, 60, 97, 203, 130, 60, 194, 139,
|
||||||
|
127, 195, 53, 156, 47, 200, 96, 201, 56, 177, 66, 176, 147, 201, 57, 168,
|
||||||
|
66, 160, 38, 155, 160, 176, 139, 171, 182, 136, 167, 183, 96, 201, 59,
|
||||||
|
66, 46, 193, 151, 96, 201, 160, 139, 219, 39, 131, 160, 191, 130, 195,
|
||||||
|
53, 131, 177, 10, 66, 176, 147, 151, 0, 60, 97, 58, 151, 0, 160, 185, 130,
|
||||||
|
60, 97, 203, 8, 2, 36, 139, 124, 193, 151, 96
|
||||||
|
};
|
||||||
|
|
||||||
|
static const u8 dtc_11[] = {
|
||||||
|
0, 2, 68, 84, 67, 2, 13, 160, 176, 151, 147, 182, 141, 152, 177, 129, 148,
|
||||||
|
188, 143, 142, 5, 3, 0, 0, 0, 2, 68, 84, 67, 4, 0, 192, 5, 15, 0, 42, 42,
|
||||||
|
42, 73, 0, 88, 0, 154, 183, 0, 0, 0, 0, 106, 9, 1, 8, 22, 100, 111, 119,
|
||||||
|
110, 108, 111, 97, 100, 2, 213, 7, 219, 39, 137, 51, 172, 130, 192, 96,
|
||||||
|
175, 191, 130, 217, 128, 57, 69, 177, 159, 179, 68, 178, 159, 193, 133,
|
||||||
|
153, 176, 159, 130, 132, 135, 164, 134, 51, 129, 60, 223, 9, 98, 128, 177,
|
||||||
|
129, 96, 201, 160, 130, 201, 51, 137, 201, 57, 68, 160, 176, 67, 219, 39,
|
||||||
|
154, 201, 40, 69, 219, 39, 150, 17, 27, 205, 51, 43, 99, 60, 118, 193,
|
||||||
|
96, 201, 160, 130, 24, 205, 51, 43, 99, 218, 156, 47, 60, 105, 193, 96,
|
||||||
|
201, 160, 138, 166, 178, 136, 160, 183, 139, 86, 202, 8, 2, 36, 138, 105,
|
||||||
|
193, 96, 201, 160, 43, 139, 167, 181, 136, 70, 177, 147, 67, 193, 96, 219,
|
||||||
|
39, 131, 195, 53, 131, 178, 10, 66, 176, 151, 0, 0, 0, 0, 0, 58, 151, 215,
|
||||||
|
2, 40, 66, 1, 203, 130, 60, 194, 139, 121, 195, 53, 156, 47, 200, 96, 201,
|
||||||
|
56, 177, 66, 176, 147, 201, 57, 168, 66, 160, 38, 155, 160, 176, 139, 171,
|
||||||
|
176, 136, 167, 183, 96, 201, 59, 66, 46, 193, 151, 96, 201, 160, 139, 219,
|
||||||
|
39, 131, 195, 53, 131, 177, 10, 66, 176, 147, 151, 0, 0, 0, 0, 0, 58, 151,
|
||||||
|
203, 8, 2, 36, 139, 117, 193, 151, 96
|
||||||
|
};
|
||||||
|
|
||||||
|
static const u8 dtc_8[] = {
|
||||||
|
0, 2, 68, 84, 67, 2, 13, 160, 176, 151, 147, 182, 141, 152, 177, 129, 148,
|
||||||
|
187, 143, 142, 5, 3, 0, 0, 0, 2, 68, 84, 67, 4, 0, 192, 5, 15, 0, 42, 42,
|
||||||
|
42, 73, 0, 88, 0, 152, 181, 0, 0, 0, 0, 106, 9, 1, 8, 22, 100, 111, 119,
|
||||||
|
110, 108, 111, 97, 100, 2, 209, 7, 219, 39, 137, 51, 172, 130, 192, 96,
|
||||||
|
175, 191, 130, 217, 128, 57, 69, 177, 159, 179, 68, 178, 159, 193, 133,
|
||||||
|
153, 176, 159, 130, 132, 135, 164, 134, 51, 129, 60, 223, 9, 98, 128, 177,
|
||||||
|
129, 96, 201, 160, 130, 201, 51, 137, 201, 57, 68, 160, 176, 67, 219, 39,
|
||||||
|
154, 201, 40, 69, 219, 39, 150, 17, 27, 205, 51, 43, 99, 60, 118, 193,
|
||||||
|
96, 201, 160, 130, 24, 205, 51, 43, 99, 218, 156, 47, 60, 105, 193, 96,
|
||||||
|
201, 160, 138, 166, 178, 136, 160, 183, 139, 86, 202, 8, 2, 36, 138, 105,
|
||||||
|
193, 96, 201, 160, 43, 139, 167, 181, 136, 70, 177, 147, 67, 193, 96, 219,
|
||||||
|
39, 131, 195, 53, 131, 178, 10, 66, 176, 151, 0, 0, 0, 58, 151, 215, 2,
|
||||||
|
40, 66, 1, 203, 130, 60, 194, 139, 119, 195, 53, 156, 47, 200, 96, 201,
|
||||||
|
56, 177, 66, 176, 147, 201, 57, 168, 66, 160, 38, 155, 160, 176, 139, 170,
|
||||||
|
190, 136, 167, 183, 96, 201, 59, 66, 46, 193, 151, 96, 201, 160, 139, 219,
|
||||||
|
39, 131, 195, 53, 131, 177, 10, 66, 176, 147, 151, 0, 0, 0, 58, 151, 203,
|
||||||
|
8, 2, 36, 139, 115, 193, 151, 96
|
||||||
|
};
|
||||||
|
|
||||||
|
static const u8 dtc_2[] = {
|
||||||
|
0, 2, 68, 84, 67, 2, 14, 160, 176, 151, 147, 182, 141, 152, 177, 129, 148,
|
||||||
|
186, 143, 185, 142, 5, 3, 0, 0, 0, 2, 68, 84, 67, 4, 0, 192, 5, 15, 0,
|
||||||
|
42, 42, 42, 73, 0, 88, 0, 149, 178, 0, 0, 0, 0, 106, 9, 1, 8, 22, 100,
|
||||||
|
111, 119, 110, 108, 111, 97, 100, 2, 203, 7, 219, 39, 137, 51, 172, 130,
|
||||||
|
192, 96, 175, 191, 130, 217, 128, 57, 69, 177, 159, 179, 68, 178, 159,
|
||||||
|
193, 133, 153, 176, 159, 130, 132, 135, 164, 134, 51, 129, 60, 223, 9,
|
||||||
|
98, 128, 177, 129, 96, 201, 160, 130, 201, 51, 137, 201, 57, 68, 160, 176,
|
||||||
|
67, 219, 39, 154, 201, 40, 69, 219, 39, 150, 17, 27, 205, 51, 43, 99, 60,
|
||||||
|
118, 193, 96, 201, 160, 130, 24, 205, 51, 43, 99, 218, 156, 47, 60, 105,
|
||||||
|
193, 96, 201, 160, 138, 166, 178, 136, 160, 183, 139, 86, 202, 8, 2, 36,
|
||||||
|
138, 105, 193, 96, 201, 160, 43, 139, 167, 181, 136, 70, 177, 147, 67,
|
||||||
|
193, 96, 219, 39, 131, 195, 53, 131, 178, 10, 66, 176, 151, 58, 151, 215,
|
||||||
|
2, 40, 66, 1, 203, 130, 60, 194, 139, 116, 195, 53, 156, 47, 200, 96, 201,
|
||||||
|
56, 177, 66, 176, 147, 201, 57, 168, 66, 160, 38, 155, 160, 176, 139, 170,
|
||||||
|
187, 136, 167, 183, 96, 201, 59, 66, 46, 193, 151, 96, 201, 160, 139, 219,
|
||||||
|
39, 131, 195, 53, 131, 177, 10, 66, 176, 147, 151, 58, 151, 203, 8, 2,
|
||||||
|
36, 139, 112, 193, 151, 96
|
||||||
|
};
|
||||||
|
|
||||||
|
const rlink_speed_table_t rlink_speed_table[] = {{
|
||||||
|
dtc_64, sizeof(dtc_64), (ST7_FOSC * 2) / (1000 * 64), 64
|
||||||
|
}, {
|
||||||
|
dtc_11, sizeof(dtc_11), (ST7_FOSC * 2) / (1000 * 11), 11
|
||||||
|
}, {
|
||||||
|
dtc_8, sizeof(dtc_8), (ST7_FOSC * 2) / (1000 * 8), 8
|
||||||
|
}, {
|
||||||
|
dtc_2, sizeof(dtc_2), (ST7_FOSC * 2) / (1000 * 2), 2
|
||||||
|
}};
|
||||||
|
|
||||||
|
const size_t rlink_speed_table_size = sizeof(rlink_speed_table) / sizeof(*rlink_speed_table);
|
||||||
|
|
||||||
|
|
@ -0,0 +1,114 @@
|
||||||
|
/***************************************************************************
|
||||||
|
* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
* lou.openocd012@fixit.nospammail.net *
|
||||||
|
* *
|
||||||
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
* it under the terms of the GNU General Public License as published by *
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
* (at your option) any later version. *
|
||||||
|
* *
|
||||||
|
* This program is distributed in the hope that it will be useful, *
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
* GNU General Public License for more details. *
|
||||||
|
* *
|
||||||
|
* You should have received a copy of the GNU General Public License *
|
||||||
|
* along with this program; if not, write to the *
|
||||||
|
* Free Software Foundation, Inc., *
|
||||||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
#define ST7_FOSC (12 * 1000000)
|
||||||
|
|
||||||
|
/* This is not a complete enumeration of ST7 registers, but it is sufficient for this interface driver. */
|
||||||
|
|
||||||
|
#define ST7_PADR (0x0000)
|
||||||
|
#define ST7_PADDR (ST7_PADR + 1)
|
||||||
|
#define ST7_PAOR (ST7_PADR + 2)
|
||||||
|
#define ST7_PBDR (0x0003)
|
||||||
|
#define ST7_PBDDR (ST7_PBDR + 1)
|
||||||
|
#define ST7_PCDR (0x0006)
|
||||||
|
#define ST7_PCDDR (ST7_PCDR + 1)
|
||||||
|
#define ST7_PCOR (ST7_PCDR + 2)
|
||||||
|
#define ST7_PDDR (0x0009)
|
||||||
|
#define ST7_PDDDR (ST7_PDDR + 1)
|
||||||
|
#define ST7_PDOR (ST7_PDDR + 2)
|
||||||
|
#define ST7_PEDR (0x000c)
|
||||||
|
#define ST7_PEDDR (ST7_PEDR + 1)
|
||||||
|
#define ST7_PEOR (ST7_PEDR + 2)
|
||||||
|
#define ST7_PFDR (0x000f)
|
||||||
|
#define ST7_PFDDR (ST7_PFDR + 1)
|
||||||
|
|
||||||
|
#define ST7_ADCDR (0x0012)
|
||||||
|
#define ST7_ADCCSR (ST7_ADCDR + 1)
|
||||||
|
|
||||||
|
#define ST7_EP2TXR (0x003e)
|
||||||
|
#define ST7_EP2TXR_STAT_TX0 (1 << 0)
|
||||||
|
#define ST7_EP2TXR_STAT_TX1 (1 << 1)
|
||||||
|
#define ST7_EP2TXR_STAT_DISABLED (0)
|
||||||
|
#define ST7_EP2TXR_STAT_STALL (ST7_EP2TXR_STAT_TX0)
|
||||||
|
#define ST7_EP2TXR_STAT_VALID (ST7_EP2TXR_STAT_TX1 | ST7_EP2TXR_STAT_TX0)
|
||||||
|
#define ST7_EP2TXR_STAT_NAK (ST7_EP2TXR_STAT_TX1)
|
||||||
|
#define ST7_EP2TXR_DTOG_TX (1 << 2)
|
||||||
|
#define ST7_EP2TXR_CTR_TX (1 << 3)
|
||||||
|
|
||||||
|
#define ST7_USB_BUF_EP0OUT (0x1550)
|
||||||
|
#define ST7_USB_BUF_EP0IN (0x1560)
|
||||||
|
#define ST7_USB_BUF_EP1OUT (0x1570)
|
||||||
|
#define ST7_USB_BUF_EP1IN (0x1580)
|
||||||
|
#define ST7_USB_BUF_EP2UODI (0x1590)
|
||||||
|
#define ST7_USB_BUF_EP2UIDO (0x1650)
|
||||||
|
|
||||||
|
#define ST7_PA0 (1 << 0)
|
||||||
|
#define ST7_PA1 (1 << 1)
|
||||||
|
#define ST7_PA2 (1 << 2)
|
||||||
|
#define ST7_PA3 (1 << 3)
|
||||||
|
#define ST7_PA4 (1 << 4)
|
||||||
|
#define ST7_PA5 (1 << 5)
|
||||||
|
#define ST7_PA6 (1 << 6)
|
||||||
|
#define ST7_PA7 (1 << 7)
|
||||||
|
|
||||||
|
#define ST7_PB0 (1 << 0)
|
||||||
|
#define ST7_PB1 (1 << 1)
|
||||||
|
#define ST7_PB2 (1 << 2)
|
||||||
|
#define ST7_PB3 (1 << 3)
|
||||||
|
#define ST7_PB4 (1 << 4)
|
||||||
|
#define ST7_PB5 (1 << 5)
|
||||||
|
#define ST7_PB6 (1 << 6)
|
||||||
|
#define ST7_PB7 (1 << 7)
|
||||||
|
|
||||||
|
#define ST7_PC0 (1 << 0)
|
||||||
|
#define ST7_PC1 (1 << 1)
|
||||||
|
#define ST7_PC2 (1 << 2)
|
||||||
|
#define ST7_PC3 (1 << 3)
|
||||||
|
#define ST7_PC4 (1 << 4)
|
||||||
|
#define ST7_PC5 (1 << 5)
|
||||||
|
#define ST7_PC6 (1 << 6)
|
||||||
|
#define ST7_PC7 (1 << 7)
|
||||||
|
|
||||||
|
#define ST7_PD0 (1 << 0)
|
||||||
|
#define ST7_PD1 (1 << 1)
|
||||||
|
#define ST7_PD2 (1 << 2)
|
||||||
|
#define ST7_PD3 (1 << 3)
|
||||||
|
#define ST7_PD4 (1 << 4)
|
||||||
|
#define ST7_PD5 (1 << 5)
|
||||||
|
#define ST7_PD6 (1 << 6)
|
||||||
|
#define ST7_PD7 (1 << 7)
|
||||||
|
|
||||||
|
#define ST7_PE0 (1 << 0)
|
||||||
|
#define ST7_PE1 (1 << 1)
|
||||||
|
#define ST7_PE2 (1 << 2)
|
||||||
|
#define ST7_PE3 (1 << 3)
|
||||||
|
#define ST7_PE4 (1 << 4)
|
||||||
|
#define ST7_PE5 (1 << 5)
|
||||||
|
#define ST7_PE6 (1 << 6)
|
||||||
|
#define ST7_PE7 (1 << 7)
|
||||||
|
|
||||||
|
#define ST7_PF0 (1 << 0)
|
||||||
|
#define ST7_PF1 (1 << 1)
|
||||||
|
#define ST7_PF2 (1 << 2)
|
||||||
|
#define ST7_PF3 (1 << 3)
|
||||||
|
#define ST7_PF4 (1 << 4)
|
||||||
|
#define ST7_PF5 (1 << 5)
|
||||||
|
#define ST7_PF6 (1 << 6)
|
||||||
|
#define ST7_PF7 (1 << 7)
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
#!/bin/sh
|
||||||
|
exec perl "$0.pl" $*
|
||||||
|
|
@ -0,0 +1,68 @@
|
||||||
|
#!/bin/perl
|
||||||
|
#***************************************************************************
|
||||||
|
#* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
#* lou.openocd012@fixit.nospammail.net *
|
||||||
|
#* *
|
||||||
|
#* This program is free software; you can redistribute it and/or modify *
|
||||||
|
#* it under the terms of the GNU General Public License as published by *
|
||||||
|
#* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
#* (at your option) any later version. *
|
||||||
|
#* *
|
||||||
|
#* This program is distributed in the hope that it will be useful, *
|
||||||
|
#* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
#* GNU General Public License for more details. *
|
||||||
|
#* *
|
||||||
|
#* You should have received a copy of the GNU General Public License *
|
||||||
|
#* along with this program; if not, write to the *
|
||||||
|
#* Free Software Foundation, Inc., *
|
||||||
|
#* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
#***************************************************************************
|
||||||
|
|
||||||
|
# A simple utility to read a list of files (names composed by numeric prescaler arguments) and compose a C source file defining data structures which hold the binary data read from those files.
|
||||||
|
|
||||||
|
@speed_table = ();
|
||||||
|
|
||||||
|
printf("/* This file was created automatically by %s. */\n\n", $0);
|
||||||
|
for $i ('rlink', 'st7') {
|
||||||
|
printf("#include \"$i.h\"\n");
|
||||||
|
}
|
||||||
|
printf("\n");
|
||||||
|
|
||||||
|
for $prescaler (sort {$b <=> $a} @ARGV) {
|
||||||
|
my(@ary) = (
|
||||||
|
byte_array_from_file(${prescaler} . "_init.dtc"),
|
||||||
|
byte_array_from_file(${prescaler} . "_call.dtc")
|
||||||
|
);
|
||||||
|
|
||||||
|
for $i (@ary) {
|
||||||
|
$i = sprintf("%d", $i);
|
||||||
|
}
|
||||||
|
$bytes = join(', ', @ary);
|
||||||
|
$bytes =~ s/(^|\s)(.{70}?\S*)/\2\n/go; # break up long lines
|
||||||
|
$bytes =~ s/\n +/\n/go;
|
||||||
|
$bytes =~ s/(^|\n)/\1\t/go; # format nicely
|
||||||
|
printf("static const u8 dtc_%d[] = {\n%s\n};\n\n", $prescaler, $bytes);
|
||||||
|
push(@speed_table, sprintf("\tdtc_%d, sizeof(dtc_%d), (ST7_FOSC * 2) / (1000 * %d), %d\n", $prescaler, $prescaler, $prescaler, $prescaler));
|
||||||
|
}
|
||||||
|
|
||||||
|
printf("const rlink_speed_table_t rlink_speed_table[] = {{\n%s}};\n\n", join("}, {\n", @speed_table));
|
||||||
|
printf("const size_t rlink_speed_table_size = sizeof(rlink_speed_table) / sizeof(*rlink_speed_table);\n\n");
|
||||||
|
|
||||||
|
|
||||||
|
sub byte_array_from_file {
|
||||||
|
my($filename) = @_;
|
||||||
|
|
||||||
|
my(@array, $text, $i) = ();
|
||||||
|
|
||||||
|
open(IN, '<', $filename) || die "$filename: $!";
|
||||||
|
undef($/);
|
||||||
|
$text = <IN>;
|
||||||
|
close(IN);
|
||||||
|
|
||||||
|
for($i = 0; $i < length($text); $i++) {
|
||||||
|
push(@array, ord(substr($text, $i, 1)));
|
||||||
|
}
|
||||||
|
|
||||||
|
@array;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
#!/bin/sh
|
||||||
|
exec perl "$0.pl" $*
|
||||||
|
|
@ -0,0 +1,709 @@
|
||||||
|
#!/bin/perl
|
||||||
|
#***************************************************************************
|
||||||
|
#* Copyright (C) 2008 Lou Deluxe *
|
||||||
|
#* lou.openocd012@fixit.nospammail.net *
|
||||||
|
#* *
|
||||||
|
#* This program is free software; you can redistribute it and/or modify *
|
||||||
|
#* it under the terms of the GNU General Public License as published by *
|
||||||
|
#* the Free Software Foundation; either version 2 of the License, or *
|
||||||
|
#* (at your option) any later version. *
|
||||||
|
#* *
|
||||||
|
#* This program is distributed in the hope that it will be useful, *
|
||||||
|
#* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
|
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
|
#* GNU General Public License for more details. *
|
||||||
|
#* *
|
||||||
|
#* You should have received a copy of the GNU General Public License *
|
||||||
|
#* along with this program; if not, write to the *
|
||||||
|
#* Free Software Foundation, Inc., *
|
||||||
|
#* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
|
#***************************************************************************
|
||||||
|
|
||||||
|
# A rudimentary assembler for DTC code.
|
||||||
|
# It is not robust, by any means, but it gets the job done.
|
||||||
|
|
||||||
|
{package DTC_as;
|
||||||
|
|
||||||
|
my($i); # for later loop to generate reverse lookup
|
||||||
|
|
||||||
|
sub new {
|
||||||
|
my($self) = bless{};
|
||||||
|
|
||||||
|
$self->{'pagewidth'} = 60;
|
||||||
|
$self;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
%status_bit_arg = (
|
||||||
|
'STOP' => 0x01,
|
||||||
|
'ERROR' => 0x02,
|
||||||
|
);
|
||||||
|
|
||||||
|
%cp_arg = (
|
||||||
|
'A=>X' => 0x00,
|
||||||
|
'A<X' => 0x01,
|
||||||
|
'CARRY' => 0x02,
|
||||||
|
'ALWAYS' => 0x03,
|
||||||
|
'ADR_BUFFER0=>CMP0' => 0x04,
|
||||||
|
'ADR_BUFFER0<CMP0' => 0x05,
|
||||||
|
'ADR_BUFFER1=>CMP1' => 0x06,
|
||||||
|
'ADR_BUFFER1<CMP1' => 0x07,
|
||||||
|
);
|
||||||
|
|
||||||
|
%shift_unit_arg = (
|
||||||
|
'CARD' => 0x00,
|
||||||
|
'MPEG' => 0x08,
|
||||||
|
);
|
||||||
|
|
||||||
|
%shift_pin_arg = (
|
||||||
|
'PIN0=>IN' => 0x00,
|
||||||
|
'PIN1=>IN' => 0x04,
|
||||||
|
'OUT=>PIN0' => 0x01,
|
||||||
|
'OUT=>PIN1' => 0x03,
|
||||||
|
);
|
||||||
|
|
||||||
|
@ld_arg = (
|
||||||
|
'<Y>',
|
||||||
|
'X',
|
||||||
|
'Y',
|
||||||
|
'MASK',
|
||||||
|
'ADR_BUFFER00',
|
||||||
|
'ADR_BUFFER01',
|
||||||
|
'ADR_BUFFER10',
|
||||||
|
'ADR_BUFFER11',
|
||||||
|
'CMP00',
|
||||||
|
'CMP01',
|
||||||
|
'CMP10',
|
||||||
|
'CMP11',
|
||||||
|
'DATA_FLASH',
|
||||||
|
'CTRL_FCI',
|
||||||
|
'CTRL_CARD',
|
||||||
|
'CTRL_MPEG',
|
||||||
|
'DR_PARALLEL',
|
||||||
|
'DDR_PARALLEL',
|
||||||
|
'OR_PARALLEL',
|
||||||
|
'DR_CARD',
|
||||||
|
'DDR_CARD',
|
||||||
|
'OR_CARD',
|
||||||
|
'SHIFT_CARD',
|
||||||
|
'DR_MPEG',
|
||||||
|
'DDR_MPEG',
|
||||||
|
'OR_MPEG',
|
||||||
|
'SHIFT_MPEG',
|
||||||
|
'DATA_BUFFER0',
|
||||||
|
'DATA_BUFFER1',
|
||||||
|
'ECC_CRC',
|
||||||
|
'TMP_ECC',
|
||||||
|
'BUFFER_MNGT'
|
||||||
|
);
|
||||||
|
|
||||||
|
for($i = 0; $i < @ld_arg; $i++) {
|
||||||
|
$ld_arg{$ld_arg[$i]} = $i;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
# ADDER8 / SUB8
|
||||||
|
sub alu8 {
|
||||||
|
my($self) = shift;
|
||||||
|
my($operand, $i) = shift;
|
||||||
|
|
||||||
|
if(defined($ld_arg{$operand})) {
|
||||||
|
$i = $ld_arg{$operand};
|
||||||
|
|
||||||
|
if($i > 0x00 && $i < 0x04) {
|
||||||
|
return(($i - 0x01) << 3);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
# ADDER16 / SUB16
|
||||||
|
sub alu16 {
|
||||||
|
my($self) = shift;
|
||||||
|
my($operand, $i) = shift;
|
||||||
|
|
||||||
|
$operand .= '0';
|
||||||
|
|
||||||
|
if(defined($ld_arg{$operand})) {
|
||||||
|
$i = $ld_arg{$operand};
|
||||||
|
|
||||||
|
if($i > 0x03 && $i < 0x0c) {
|
||||||
|
return(($i - 0x04) << 2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
# BSET / BCLR
|
||||||
|
sub bsetorclr {
|
||||||
|
my($self) = shift;
|
||||||
|
my($ret);
|
||||||
|
|
||||||
|
if(@_ < 1) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
$ret = $_[0];
|
||||||
|
|
||||||
|
if(($ret < 0) || ($ret > 3)) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
return $ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
# Opcode lookup table
|
||||||
|
%op = (
|
||||||
|
'NOP' => [
|
||||||
|
0x0,
|
||||||
|
],
|
||||||
|
'SEC' => [
|
||||||
|
0x1,
|
||||||
|
],
|
||||||
|
'CLC' => [
|
||||||
|
0x2,
|
||||||
|
],
|
||||||
|
'RET' => [
|
||||||
|
0x3,
|
||||||
|
],
|
||||||
|
'STATUS' => [
|
||||||
|
0x4,
|
||||||
|
sub {
|
||||||
|
my($self) = shift;
|
||||||
|
my($ret, $i);
|
||||||
|
|
||||||
|
for $i (@_) {
|
||||||
|
if(!defined($status_bit_arg{"\U$i"})) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
$ret |= $status_bit_arg{"\U$i"};
|
||||||
|
}
|
||||||
|
if($ret < 1) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
return $ret;
|
||||||
|
}
|
||||||
|
],
|
||||||
|
'CP' => [
|
||||||
|
0x8,
|
||||||
|
sub {
|
||||||
|
my($self) = shift;
|
||||||
|
if((@_ != 1) || (!defined($cp_arg{"\U$_[0]"}))) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
return($cp_arg{"\U$_[0]"});
|
||||||
|
}
|
||||||
|
],
|
||||||
|
'SHIFT' => [
|
||||||
|
0x10,
|
||||||
|
sub {
|
||||||
|
my($self) = shift;
|
||||||
|
my($ret, $i);
|
||||||
|
|
||||||
|
if((@_ < 2) || (!defined($shift_unit_arg{"\U$_[0]"}))) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
$ret = $shift_unit_arg{"\U$_[0]"};
|
||||||
|
shift;
|
||||||
|
|
||||||
|
for $i (@_) {
|
||||||
|
if(!defined($shift_pin_arg{"\U$i"})) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
$ret |= $shift_pin_arg{"\U$i"};
|
||||||
|
}
|
||||||
|
|
||||||
|
return $ret;
|
||||||
|
}
|
||||||
|
],
|
||||||
|
'SUB8' => [
|
||||||
|
0x24,
|
||||||
|
\&alu8
|
||||||
|
],
|
||||||
|
'ADDER8' => [
|
||||||
|
0x25,
|
||||||
|
\&alu8
|
||||||
|
],
|
||||||
|
'SUB16' => [
|
||||||
|
0x26,
|
||||||
|
\&alu16
|
||||||
|
],
|
||||||
|
'ADDER16' => [
|
||||||
|
0x27,
|
||||||
|
\&alu16
|
||||||
|
],
|
||||||
|
'BCLR' => [
|
||||||
|
0x28,
|
||||||
|
\&bsetorclr
|
||||||
|
],
|
||||||
|
'BSET' => [
|
||||||
|
0x38,
|
||||||
|
\&bsetorclr
|
||||||
|
],
|
||||||
|
'REVERSE' => [
|
||||||
|
0x30,
|
||||||
|
],
|
||||||
|
'XOR' => [
|
||||||
|
0x31,
|
||||||
|
],
|
||||||
|
'AND' => [
|
||||||
|
0x32,
|
||||||
|
],
|
||||||
|
'EXCHANGE' => [
|
||||||
|
0x33,
|
||||||
|
],
|
||||||
|
'DECY' => [
|
||||||
|
0x3c,
|
||||||
|
],
|
||||||
|
'INCY' => [
|
||||||
|
0x3d,
|
||||||
|
],
|
||||||
|
'JP' => [
|
||||||
|
0x40,
|
||||||
|
sub {
|
||||||
|
my($self) = shift;
|
||||||
|
my($i);
|
||||||
|
|
||||||
|
if(@_ != 1) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
$i = $_[0];
|
||||||
|
if(!defined($self->{'label'}{$i})) {
|
||||||
|
$i =~ s/^://o;
|
||||||
|
if(!defined($self->{'label'}{$i})) {
|
||||||
|
# not a defined label
|
||||||
|
undef $i;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(defined($i)) {
|
||||||
|
$i = $self->{'label'}{$i} - $self->{'pc'};
|
||||||
|
} else {
|
||||||
|
$i = $_[0];
|
||||||
|
}
|
||||||
|
|
||||||
|
if($i =~ m/^([+-]?\d+)$/) {
|
||||||
|
$i = 0 + $1;
|
||||||
|
if(($i > 31) || ($i < -31)) {
|
||||||
|
warn "relative jump ($i) out of range";
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
if($i < 0) {
|
||||||
|
return(0x20 - $1);
|
||||||
|
} else {
|
||||||
|
return(0x00 + $1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
],
|
||||||
|
'BRANCH' => [
|
||||||
|
0x60,
|
||||||
|
],
|
||||||
|
'LD' => [
|
||||||
|
0x80,
|
||||||
|
sub {
|
||||||
|
my($self) = shift;
|
||||||
|
my($i);
|
||||||
|
|
||||||
|
# print STDERR join(", ", LD, @_), "\n";
|
||||||
|
|
||||||
|
if(@_ == 1) {
|
||||||
|
$_[1] = 'A';
|
||||||
|
}
|
||||||
|
if(@_ != 2) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
if($_[0] =~ m/^([ML])S[BN]$/o) {
|
||||||
|
# MSB/LSB aka MSN/LSN
|
||||||
|
if($1 eq 'L') {
|
||||||
|
$_[0] = 'A.L';
|
||||||
|
} else {
|
||||||
|
$_[0] = 'A.H';
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if($_[0] =~ m/^A\.([LH])$/o) {
|
||||||
|
# A.L/A.H
|
||||||
|
my($islsb) = ($1 eq 'L') ? 1 : 0;
|
||||||
|
$i = $_[1];
|
||||||
|
if($i =~ s/^0x([0-9a-fA-F])$/hex($1)/e) {
|
||||||
|
# print "$i looks hex\n";
|
||||||
|
} elsif($i =~ m/^\d+$/) {
|
||||||
|
# print "$i looks decimal\n";
|
||||||
|
} elsif(defined($self->{'label'}{$i})) {
|
||||||
|
# print "label match for $i ($self->{'label'}{$i})\n";
|
||||||
|
$i = $self->{'label'}{$i};
|
||||||
|
# print "\$i=$i\n";
|
||||||
|
# print "\$islsb=$islsb\n";
|
||||||
|
if($islsb) {
|
||||||
|
$i = ($i & 0xf);
|
||||||
|
} else {
|
||||||
|
$i = ($i >> 4) & 0xf;
|
||||||
|
}
|
||||||
|
# print "\$i=$i\n";
|
||||||
|
} else {
|
||||||
|
print "no label match for $i\n";
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
if(($i < 0) || ($i > 0xf)) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
if($islsb) {
|
||||||
|
$i |= 0x10;
|
||||||
|
};
|
||||||
|
return(0x20 | $i);
|
||||||
|
} elsif($_[0] eq 'A') {
|
||||||
|
if(!defined($ld_arg{$_[1]})) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
return(0x40 | $ld_arg{$_[1]});
|
||||||
|
} elsif($_[1] eq 'A') {
|
||||||
|
if(!defined($ld_arg{$_[0]})) {
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
return(0x00 | $ld_arg{$_[0]});
|
||||||
|
}
|
||||||
|
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
],
|
||||||
|
);
|
||||||
|
|
||||||
|
$op{'JR'} = $op{'JP'};
|
||||||
|
|
||||||
|
|
||||||
|
sub pass {
|
||||||
|
my($self, $ifh, $ofh, $passnum) = @_;
|
||||||
|
|
||||||
|
# passnum=0 for plain parsing pass to populate label values
|
||||||
|
# passnum=1 for actual pass to assemble
|
||||||
|
|
||||||
|
my($line, $oline, $opcd);
|
||||||
|
|
||||||
|
if($passnum == 0) {
|
||||||
|
delete($self->{'label'});
|
||||||
|
delete($self->{'binary'});
|
||||||
|
delete($self->{'ENTRY'});
|
||||||
|
delete($self->{'LUT'});
|
||||||
|
}
|
||||||
|
|
||||||
|
seek($ifh, 0, 0); # rewind
|
||||||
|
$self->{'pc'} = 0;
|
||||||
|
$self->{'line_number'} = 0;
|
||||||
|
while(defined($line = <$ifh>)) {
|
||||||
|
$self->{'line_number'}++;
|
||||||
|
$line =~ s/\s+$//so;
|
||||||
|
$oline = $line;
|
||||||
|
$line =~ s/;.*//o;
|
||||||
|
$line =~ s/^\s+//o;
|
||||||
|
@_ = split(/[\s,]+/, $line);
|
||||||
|
|
||||||
|
undef($opcd);
|
||||||
|
|
||||||
|
if(@_ > 0) {
|
||||||
|
|
||||||
|
if(
|
||||||
|
($_[0] =~ s/^://o)
|
||||||
|
||
|
||||||
|
($_[0] =~ s/:$//o)
|
||||||
|
) {
|
||||||
|
if($passnum == 0) {
|
||||||
|
if(defined($self->{'label'}{$_[0]})) {
|
||||||
|
die "label redefinition for \"$_[0]\" in line $self->{'line_number'}";
|
||||||
|
}
|
||||||
|
$self->{'label'}{$_[0]} = $self->{'pc'};
|
||||||
|
}
|
||||||
|
shift(@_);
|
||||||
|
}
|
||||||
|
|
||||||
|
if(@_ > 0) {
|
||||||
|
if($passnum == 1) {
|
||||||
|
if((@_ == 3) && ($_[1] eq '=')) {
|
||||||
|
# convert this = that to LD
|
||||||
|
$_[1] = $_[0];
|
||||||
|
$_[0] = 'LD';
|
||||||
|
}
|
||||||
|
elsif((@_ == 3) && ($_[1] eq '+=')) {
|
||||||
|
# convert this += that to ADDER8 or ADDER16
|
||||||
|
if($_[0] eq 'A') {
|
||||||
|
@_ = ('ADDER8', $_[2]);
|
||||||
|
}
|
||||||
|
elsif($_[2] eq 'X') {
|
||||||
|
@_ = ('ADDER16', $_[0]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
elsif((@_ == 3) && ($_[1] eq '-=')) {
|
||||||
|
# convert this -= that to ADDER8 or ADDER16
|
||||||
|
if($_[0] eq 'A') {
|
||||||
|
@_ = ('SUB8', $_[2]);
|
||||||
|
}
|
||||||
|
elsif($_[2] eq 'X') {
|
||||||
|
@_ = ('SUB16', $_[0]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
elsif((@_ == 1) && ($_[0] =~ m/^(B((SET)|(CLR)))([1-4])$/oi)) {
|
||||||
|
# convert BSETn or BCLRn to BSET n-1 or BCLR n-1
|
||||||
|
$_[0] = $1;
|
||||||
|
$_[1] = $5 - 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
$op = "\U$_[0]";
|
||||||
|
if(!defined($op{$op})) {
|
||||||
|
die "unknown instruction: $op in line $self->{'line_number'}";
|
||||||
|
}
|
||||||
|
shift(@_);
|
||||||
|
|
||||||
|
$op = $op{$op};
|
||||||
|
$sub = $op->[1];
|
||||||
|
if(defined($sub)) {
|
||||||
|
$opcd = &$sub($self, @_);
|
||||||
|
} else {
|
||||||
|
$opcd = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
if(!defined($opcd)) {
|
||||||
|
die "bad argument(s) in line $self->{'line_number'}";
|
||||||
|
}
|
||||||
|
|
||||||
|
$opcd |= $op->[0];
|
||||||
|
}
|
||||||
|
|
||||||
|
$self->{'pc'}++;
|
||||||
|
}
|
||||||
|
|
||||||
|
} else {
|
||||||
|
if($passnum == 0) {
|
||||||
|
if($oline =~ m/^;LUT; (.*)/o) {
|
||||||
|
my($entry, $label) = split(/\s+/, $1);
|
||||||
|
$entry =~ s/^0x//o;
|
||||||
|
$self->{'LUT'}[hex($entry)] = $label;
|
||||||
|
}
|
||||||
|
if($oline =~ m/^;ENTRY; (.*)/o) {
|
||||||
|
my($id, $label) = split(/\s+/, $1);
|
||||||
|
$self->{'ENTRY'}{$id} = $label;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if($passnum == 1) {
|
||||||
|
if(defined($opcd)) {
|
||||||
|
$self->{'binary'} .= chr($opcd);
|
||||||
|
|
||||||
|
printf $ofh ("/* 0x%02x */ 0x%02x%s /* %-*s */\n",
|
||||||
|
$self->{'pc'} - 1,
|
||||||
|
$opcd,
|
||||||
|
(
|
||||||
|
(
|
||||||
|
($self->{'last pc'} < 0xff)
|
||||||
|
||
|
||||||
|
($self->{'last pc'} != $self->{'pc'} - 1)
|
||||||
|
) ?
|
||||||
|
','
|
||||||
|
:
|
||||||
|
''
|
||||||
|
),
|
||||||
|
$self->{'pagewidth'} - 23,
|
||||||
|
$oline
|
||||||
|
);
|
||||||
|
} else {
|
||||||
|
if($oline ne '') {
|
||||||
|
print $ofh " /* $oline */\n";
|
||||||
|
} else {
|
||||||
|
print $ofh "\n";
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if($passnum == 0) {
|
||||||
|
$self->{'last pc'} = $self->{'pc'} - 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
if($passnum == 1) {
|
||||||
|
while($self->{'pc'} < 0xff) {
|
||||||
|
printf $ofh ("/* 0x%02x */ 0,\n",
|
||||||
|
$self->{'pc'}
|
||||||
|
);
|
||||||
|
$self->{'pc'}++;
|
||||||
|
}
|
||||||
|
if($self->{'pc'} < 0x100) {
|
||||||
|
printf $ofh ("/* 0x%02x */ 0\n",
|
||||||
|
$self->{'pc'}
|
||||||
|
);
|
||||||
|
$self->{'pc'}++;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
} # package DTC_as
|
||||||
|
|
||||||
|
|
||||||
|
use Getopt::Std;
|
||||||
|
|
||||||
|
%opt = (
|
||||||
|
't' => 'unsigned char',
|
||||||
|
);
|
||||||
|
|
||||||
|
# -t type of arrays (defaults to unsigned char)
|
||||||
|
# -l lookup table array name (no table generated if not provided)
|
||||||
|
# -d DTC code array name (naked elements if not provided)
|
||||||
|
# -i input filename (trailing argument if not provided)
|
||||||
|
# -o output filename (stdout if not provided)
|
||||||
|
getopts('l:d:i:o:t:b', \%opt);
|
||||||
|
|
||||||
|
if(defined($opt{'i'})) {
|
||||||
|
$infile = $opt{'i'};
|
||||||
|
} else {
|
||||||
|
$infile = shift;
|
||||||
|
}
|
||||||
|
|
||||||
|
if(!open(IN, '<', $infile)) {
|
||||||
|
die "$infile: $!";
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
if($opt{'b'}) {
|
||||||
|
if(!defined($opt{'o'})) {
|
||||||
|
die "binary format requires -o";
|
||||||
|
}
|
||||||
|
if(!open(OUT, '>&', *STDOUT)) {
|
||||||
|
die "dup stdout: $!";
|
||||||
|
}
|
||||||
|
open(STDOUT, '>&', *STDERR);
|
||||||
|
} else {
|
||||||
|
if(defined($opt{'o'})) {
|
||||||
|
if(!open(OUT, '>', $opt{'o'})) {
|
||||||
|
die "$opt{'o'}: $!";
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
if(!open(OUT, '>&', *STDOUT)) {
|
||||||
|
die "dup stdout: $!";
|
||||||
|
}
|
||||||
|
open(STDOUT, '>&', *STDERR);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
$as = new DTC_as;
|
||||||
|
|
||||||
|
$as->pass(*IN, *OUT, 0);
|
||||||
|
|
||||||
|
if(defined($opt{'d'})) {
|
||||||
|
print OUT "$opt{'t'} $opt{'d'}", "[0x100] = {\n";
|
||||||
|
}
|
||||||
|
$as->pass(*IN, *OUT, 1);
|
||||||
|
if(defined($opt{'d'})) {
|
||||||
|
print OUT "};\n\n";
|
||||||
|
}
|
||||||
|
|
||||||
|
close(IN);
|
||||||
|
|
||||||
|
if(defined($opt{'l'})) {
|
||||||
|
print OUT "$opt{'t'} $opt{'l'}", "[0x40] = {\n";
|
||||||
|
# $end = @{$as->{'LUT'}};
|
||||||
|
# if($end > 0x100) {
|
||||||
|
# $end = 0x100;
|
||||||
|
# }
|
||||||
|
for($i = 0xc0; $i < 0x100; $i++) {
|
||||||
|
$label = $as->{'LUT'}[$i];
|
||||||
|
if(defined($label)) {
|
||||||
|
if(defined($as->{'label'}{$label})) {
|
||||||
|
printf OUT ("/* 0x%02x */ 0x%02x%s /* %s */\n",
|
||||||
|
$i,
|
||||||
|
$as->{'label'}{$label},
|
||||||
|
(($i < 0xff) ? ',' : ''),
|
||||||
|
$label
|
||||||
|
);
|
||||||
|
} else {
|
||||||
|
die "label $label has not been defined";
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
printf OUT ("/* 0x%02x */ 0%s\n",
|
||||||
|
$i,
|
||||||
|
(($i < 0xff) ? ',' : ''),
|
||||||
|
);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
print OUT "};\n\n";
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
close(OUT);
|
||||||
|
|
||||||
|
sub DTCLOAD_COMMENT { 0; }
|
||||||
|
sub DTCLOAD_ENTRY { 1; }
|
||||||
|
sub DTCLOAD_LOAD { 2; }
|
||||||
|
sub DTCLOAD_RUN { 3; }
|
||||||
|
sub DTCLOAD_LUT_START { 4; }
|
||||||
|
sub DTCLOAD_LUT { 5; }
|
||||||
|
|
||||||
|
|
||||||
|
if($opt{'b'}) {
|
||||||
|
open(OUT, ">", $opt{'o'}) || die "$opt{'o'}: $!";
|
||||||
|
syswrite(OUT, pack('CC', DTCLOAD_LUT_COMMENT, 3 - 1) . 'DTC');
|
||||||
|
|
||||||
|
$ref = $as->{'LUT'};
|
||||||
|
if(@$ref > 0) {
|
||||||
|
for($start = 0; $start < @$ref && !defined($ref->[$start]); $start++) {}
|
||||||
|
for($end = 0xff; $end >= $start && !defined($ref->[$end]); $end--) {}
|
||||||
|
undef($lut);
|
||||||
|
for($i = $start; $i <= $end; $i++) {
|
||||||
|
if(!defined($ref->[$i])) {
|
||||||
|
$lut .= "\0";
|
||||||
|
next;
|
||||||
|
}
|
||||||
|
$label = $ref->[$i];
|
||||||
|
if(defined($as->{'label'}{$label})) {
|
||||||
|
$label = $as->{'label'}{$label};
|
||||||
|
# printf("adding LUT entry 0x%02x\n", $label);
|
||||||
|
$lut .= chr($label);
|
||||||
|
} else {
|
||||||
|
die "label $label has not been defined";
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if(length($lut) > 0) {
|
||||||
|
syswrite(OUT, pack('CCC', DTCLOAD_LUT_START, 1 - 1, $start));
|
||||||
|
syswrite(OUT, pack('CC', DTCLOAD_LUT, length($lut) - 1) . $lut);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
while(($key, $label) = each(%{$as->{'ENTRY'}})) {
|
||||||
|
# print "$key = $label\n";
|
||||||
|
if(defined($as->{'label'}{$label})) {
|
||||||
|
$label = $as->{'label'}{$label};
|
||||||
|
# print "key=$key\n";
|
||||||
|
# print "label=$label\n";
|
||||||
|
syswrite(OUT, pack('CCC', DTCLOAD_ENTRY, length($key), $label) . $key);
|
||||||
|
} else {
|
||||||
|
die "label $label has not been defined";
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(length($as->{'binary'})) {
|
||||||
|
# printf("DTC code size: 0x%x\n", length($as->{'binary'}));
|
||||||
|
syswrite(OUT, pack('CC',
|
||||||
|
DTCLOAD_LOAD ,
|
||||||
|
length($as->{'binary'}) - 1
|
||||||
|
) . $as->{'binary'});
|
||||||
|
|
||||||
|
if(%{$as->{'ENTRY'}} < 1) {
|
||||||
|
syswrite(OUT, pack('CCC', DTCLOAD_RUN, 1 - 1, 0x00));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
close(OUT);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
0;
|
||||||
|
|
||||||
Loading…
Reference in New Issue