riscv-openocd/tcl/target/zynq_7000.cfg

#
# Xilinx Zynq-7000 All Programmable SoC
#
# http://www.xilinx.com/products/silicon-devices/soc/zynq-7000/index.htm
#

set _CHIPNAME zynq
set _TARGETNAME $_CHIPNAME.cpu

jtag newtap zynq_pl bs -irlen 6 -ircapture 0x1 -irmask 0x03 \
    -expected-id 0x23727093 \
    -expected-id 0x13722093 \
    -expected-id 0x03727093 \
    -expected-id 0x03736093

jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4ba00477

dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

target create ${_TARGETNAME}0 cortex_a -dap $_CHIPNAME.dap \
    -coreid 0 -dbgbase 0x80090000
target create ${_TARGETNAME}1 cortex_a -dap $_CHIPNAME.dap \
    -coreid 1 -dbgbase 0x80092000
target smp ${_TARGETNAME}0 ${_TARGETNAME}1

adapter speed 1000

${_TARGETNAME}0 configure -event reset-assert-post "cortex_a dbginit"
${_TARGETNAME}1 configure -event reset-assert-post "cortex_a dbginit"

pld device virtex2 zynq_pl.bs 1

set XC7_JSHUTDOWN 0x0d
set XC7_JPROGRAM 0x0b
set XC7_JSTART 0x0c
set XC7_BYPASS 0x3f

proc zynqpl_program {tap} {
	global XC7_JSHUTDOWN XC7_JPROGRAM XC7_JSTART XC7_BYPASS
	irscan $tap $XC7_JSHUTDOWN
	irscan $tap $XC7_JPROGRAM
	runtest 60000
	#JSTART prevents this from working...
	#irscan $tap $XC7_JSTART
	runtest 2000
	irscan $tap $XC7_BYPASS
	runtest 2000
}