riscv-openocd/tcl/test/syntax1.cfg

jtag_nsrst_delay 200
jtag_ntrst_delay 200

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst

#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
jtag_reset 1 1
jtag_reset 0 0

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f

#target configuration
#daemon_startup reset

set _TARGETNAME [format "%s.cpu" lpc2148]
target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0

$_TARGETNAME configure -event reset-init {
soft_reset_halt
mvb 0xE01FC040 0x01
}



flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765