interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/stm32f429discovery.cfg

16 lines
324 B
INI
Raw Normal View History

cfg: add STM32F429 discovery board config Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1691 Tested-by: jenkins
2013-10-10 14:56:26 -05:00
#
# This is an STM32F429 discovery board with a single STM32F429ZI chip.
# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/PF259090
#
source [find interface/stlink-v2.cfg]
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
transport select hla_swd
tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible device. Increase workareasize when it is know we have a larger device. Change-Id: Ieaee92e7cd25cc201989f14de122349698871412 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3378 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-03-02 06:36:54 -06:00
# increase working area to 128KB
set WORKAREASIZE 0x20000
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
source [find target/stm32f4x.cfg]
cfg: add STM32F429 discovery board config Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1691 Tested-by: jenkins
2013-10-10 14:56:26 -05:00
cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-10 04:19:26 -06:00
reset_config srst_only