interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/chip/st/spear/spear3xx_ddr.tcl

128 lines
4.8 KiB
Tcl
Raw Normal View History

TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# Init scripts to configure DDR controller of SPEAr3xx
# http://www.st.com/spear
# Original values taken from XLoader source code
#
# Date: 2010-09-23
# Author: Antonio Borneo <borneo.antonio@gmail.com>
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
proc sp3xx_ddr_init {ddr_type {ddr_chips 1}} {
if { $ddr_chips != 1 && $ddr_chips != 2 } {
error "Only 1 or 2 DDR chips permitted. Wrong value "$ddr_chips
}
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
if { $ddr_type == "mt47h64m16_3_333_cl5_async" } {
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
ddr_spr3xx_mt47h64m16_3_333_cl5_async $ddr_chips
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
set ddr_size 0x08000000
## add here new DDR chip definition. Prototype:
#} elseif { $ddr_type == "?????" } {
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
# ????? $ddr_chips
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# set ddr_size 0x?????
} else {
error "sp3xx_ddr_init: unrecognized DDR type "$ddr_type
}
TCL/SPEAr: move DDR activation in common code DDR controller activation should not be in DDR chip specific code, but in generic DDR controller part. Change-Id: If1b178228352b48b0097d7b9b300005fb5bb4fb6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/228 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 21:46:59 -06:00
# MPMC START
mww 0xfc60001c 0x01000100
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
if { $ddr_chips == 2 } {
TCL scripts: replace "puts" with "echo" Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-08 03:23:49 -06:00
echo [format \
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
"Double chip DDR memory. Total memory size 0x%08x byte" \
From upstream (#620) * cortex_m: use unsigned int for FPB and DWT quantifiers related quantifiers are: - fp_num_lit - fp_num_code - dwt_num_comp - dwt_comp_available Change-Id: I07dec2d4aa21bc0e580be0d9fd0a6809f876c2a8 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6185 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * telnet: allow hiding selected commands during auto-completion We have TCL procedure and commands that we do not want to show in the list of auto-completion. E.g. TCL wrappers for deprecated commands, internal procedures that are not supposed to be exposed to user, or even commands that the user decides to hide. Create a TCL procedure to be called by telnet auto-complete code in place of the hard-coded TCL command. The procedure will run the same command and will filter-out the unwanted command names. Initialize the list of commands to be filtered-out with the name of the TCL procedure above, as it is considered as internal. Change-Id: I2d83bbf8194502368c589c85cccb617e69128c69 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6194 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * telnet/auto-complete: hide deprecated and internal commands For both: - TCL proc that redirect deprecated commands to the new commands, - TCL proc used internally and not supposed to be exposed to user, add their name to the list of commands that should be hide by the telnet auto-complete. Change-Id: I05237c6a79334b7d2b151dfb129fb57b2f40bba6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6195 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * startup.tcl: prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Modify the script startup.tcl compiled-in OpenOCD binary to comply with the new jimtcl. Change-Id: I520dcafacadaa289a815035f93f250447ca66ea0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6158 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. In the TCL scripts distributed with OpenOCD there are 1700+ lines that should be modified before switching to jimtcl 0.81. Apply the script below on every script in tcl folder. It fixes more than 92% of the lines %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- #!/usr/bin/perl -Wpi my $re_sym = qr{[a-z_][a-z0-9_]*}i; my $re_var = qr{(?:\$|\$::)$re_sym}; my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i; my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)}; my $re_op = qr{<<|>>|[+\-*/&|]}; my $re_expr = qr{( (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item) \s*$re_op\s* (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\)) )}x; # [expr [dict get $regsC100 SYM] + HEXNUM] s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/; # [ expr (EXPR) ] # [ expr EXPR ] # note: $re_expr captures '$3' s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/; s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/; %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6159 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [2/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Enclose within double quote the argument of 'expr' when there is the need to concatenate strings. Change-Id: Ic0ea990ed37337a7e6c3a99670583685b570b8b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6160 Tested-by: jenkins * tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Fix manually the remaining lines that don't match simple patterns and would require dedicated boring scripting. Remove the 'expr' command where appropriate. Change-Id: Ia75210c8447f88d38515addab4a836af9103096d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6161 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/stm8: Make 'stm8_command_handlers' static Change-Id: I5237a8f2a1ecba9383672e37bd56f8ccd17598b6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6200 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/riscv: Change 'authdata_read' output Use a constant output length and remove the line break to make the authentication data easier to parse. Change-Id: Iebbf1f171947ef89b0f360a2cb286a4ea15c6ba5 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6199 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com> * Enable adapter "Bus Pirate" by default. The Bus Pirate is now listed in the "OpenOCD configuration summary" too. Change-Id: Ieb7bf9134af456ebe9803f3108a243204fb2a62d Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/5637 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * coding-style: additional style for C code To improve readability and to push more uniform code style. Prefer 'if (false) {...}' for unused code so it get checked by the compiler. Define preferred indentation for 'switch' statement. Require balanced brackets in 'if/else'. Report the max line length. Report the formatting strings for stdint/inttypes types. Report the type 'target_addr_t'. Prefer 'unsigned int' to 'unsigned'. Change-Id: I0192a4ed298f6c6c432764fdd156cffd4b13fc89 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6203 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Marc Schink <dev@zapb.de> * Add IPDBG JtagHost functionality to OpenOCD IPDBG are utilities to debug IP-cores. It uses JTAG for transport to/from the FPGA. The different UIs use TCP/IP as transport. The JtagHost makes the bridge between these two. Comparable to the bridge between GDB and the in-circuit- debugging-unit of a micro controller. Change-Id: Ib1bc10dcbd4ea426e492bb7b2d85c1ed1b7a8d5a Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: http://openocd.zylin.com/5938 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * flash/nor/xcf: Do not use 'Yoda conditions' Change-Id: I17308f5237338ce468e5b86289a0634429deaaa9 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6201 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cortex_m: add armv8m special registers Change-Id: I1942f375a5f4282ad1fe4a2ff3b8f3cbc64d8f7f Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6016 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * rtos: Add support for Zephyr RTOS With this patch, the Zephyr[1] RTOS is supported by OpenOCD. As usual with support for other RTOSes, Zephyr must be compiled with the DEBUG_THREAD_INFO option. This will generate some symbols with information needed in order to build the list of threads. The current implementation is limited to Zephyr running on ARM Cortex-M processors. This is the only ARM variant supported by Zephyr at the moment and is used on most of the officially supported boards. [1] https://www.zephyrproject.org/ Change-Id: I22afdbec91562f3a22cf5b88cd4ea3a7a59ba0b4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Signed-off-by: Leandro Pereira <leandro.pereira@intel.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Reviewed-on: http://openocd.zylin.com/4988 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/armv7m.h: [style] replace tab with space between variable type and name Change-Id: I9740c25857295a2a655d3046322a3f23f0ee7f78 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6230 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * server: gdb_server: Add colon for target extended-remote Both GDB commands "target remote" and "target extended-remote" require to have ":" right before port number. e.g. (gdb) target extended-remote :3333 Add ":" to the warning message so that users can copy & past it. Change-Id: Id6d8ec1e4dfd3c12cb7f3b314064f2c35fa7ab55 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6237 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * jimtcl: restrict memory leak workaround on Linux only The workaround for jimtcl 0.80 in commit 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") issues a compile time error on macOS: ../src/helper/command.c:157:22: error: aliases are not supported on darwin __attribute__((weak, alias("workaround_createcommand"))); The OS is x86_64-apple-darwin19.6.0 and the compiler used is x86_64-apple-darwin13.4.0-clang. Restrict the workaround on Linux host only. The fix for 'expr' syntax change is already merged and the workaround will be dropped soon. Change-Id: I925109a9c57c05f8c95b70bc7d6604eb1172cd79 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Adam Jeliński <ajelinski@users.sourceforge.net> Fixes: 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") Fixes: https://sourceforge.net/p/openocd/tickets/304/ Reviewed-on: http://openocd.zylin.com/6241 Tested-by: jenkins * target/armv7m: fix static analyzer warning Despite of assert(is_packed) clang static analyser complains on use of the uninitialized offset variable. Cross compiling with latest x86_64-w64-mingw32-gcc hits warnings src/target/armv7m.c: In function ‘armv7m_read_core_reg’: src/target/armv7m.c:337:54: error: ‘reg32_id’ may be used uninitialized in this function [-Werror=maybe-uninitialized] It happens because mingw32 defines assert() without the attribute "noreturn", whatever NDEBUG is defined or not. Replace assert(is_packed) by if (is_packed) conditional and call assert(false) in the else branch. Change-Id: Id3c7dcccb65106e28be200b9a4d2b642f4d31019 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/6256 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Andrzej Sierżęga <asier70@gmail.com> * cmsis_dap: fix build on macOS Compile fails with error: src/jtag/drivers/cmsis_dap.c:683:28: error: format specifies type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] " received 0x%" PRIx8, CMD_DAP_TFER, resp[0]); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ Fix the format specifier. Change-Id: I0a5a1a35452d634019989d14d849501fb8a7e93a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6255 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: do not perform soft_reset_halt on targets without VECTRESET Change-Id: Ib3df457e0afe4e342c82ad1af25e03aad6979d87 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6209 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: fix VECTRESET detection for ARMv6-M cores VECTRESET check should be done after verifying if the core is an ARMv6-M core, and not before that. Fixes: 2dc9c1df81b6 ("cortex_m: [FIX] ARMv8-M does not support VECTRESET") Change-Id: I8306affd332b3a35cea69bba39ef24ca71244273 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6232 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_dpm: rename 'wp_pc' as 'wp_addr' The field 'wp_pc' was originally introduced in commit 55eeea7fceb6 ("ARMv7a/Cortex-A8: report watchpoint trigger insn") in end 2009 to contain the address of the instruction which triggered a watchpoint. Later on with commit 651b861d5d5f ("target/aarch64: Add watchpoint support") it has been reused in to hold directly the memory address that triggered a watchpoint. Rename 'wp_pc' as 'wp_addr' and change its doxygen description. While there, fix the format string to print the field. Change-Id: I2e5ced1497e4a6fb6b38f91e881807512e8d8c47 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6204 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * target/aarch64: fix watchpoint management The early documentation for armv8a report the debug register WFAR as containing the address of the instruction that triggered the watchpoint. More recent documentation report the register EDWAR as containing the data memory address that triggered the watchpoint. The name of macros CPUV8_DBG_WFAR0 and CPUV8_DBG_WFAR1 is not correct as they point to the debug register EDWAR, so reading such register returns directly the data memory address that triggered the watchpoint. The code incorrectly passes this address value to the function armv8_dpm_report_wfar(); this function is supposed to adjust the PC value, decrementing it to remove the effects of the CPU pipeline. This pipeline offset, that has no meaning on the value in EDWAR, caused commit 651b861d5d5f ("target/aarch64: Add watchpoint support") to add back the offset while comparing the address with the watchpoint enabled. The upper 32 bits of EDWAR are not valid in aarch32 mode and have to be ignored. Rename CPUV8_DBG_WFAR0/1 as CPUV8_DBG_EDWAR0/1. Remove the function armv8_dpm_report_wfar(). Remove the offset while searching the matching watchpoint. Ignore the upper 32 bits of EDWAR in aarch32 mode. Fix a comment and the LOG text. Change-Id: I7cbdbeb766fa18e31cc72be098ca2bc501877ed1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6205 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * flash/stm32l4x: add missing break statement this is not a bug fix, this for loop will issue only one match adding the break will save unnecessary more loops. Change-Id: Ic1484ea8cdea1b284eb570f9e3e7818e07daf5cd Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6248 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins * github/action: create a permanent 'latest' release this commit extends the existing snapshot action to create a release named 'latest' with the built binaries for windows. this 'latest' release will be updated after every push to github. Change-Id: I75a64c598169241743add3ac9aa7a0337fbab7f2 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6127 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * tcl/rp2040: remove empty line at end of file Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6221 Tested-by: jenkins * tcl: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. While there, fix one indentation. Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6214 Tested-by: jenkins * flash: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: Ia5f134c91beb483fd865df9e4877e0ec3e789478 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6215 Tested-by: jenkins * jtag: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6216 Tested-by: jenkins * target: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I548581247db72e683249749d1b8725035530b06e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6217 Tested-by: jenkins * openocd: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I7b4cae1798ff5ea048fcbc671a397af763fdc605 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6218 Tested-by: jenkins * Document the buspirate interface driver. Change-Id: Iaff13fc5187041a840f4f00eb6b4ee52880cf47e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6231 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Warn on undefined preprocessor symbols Preprocessor directives like "#if SYMBOL" silently replace undefined or misspelt symbols with 0, which makes configuration bugs hard to spot. Compiler flag "-Wundef" prevents such errors. Change-Id: I91b7ba2db02ef0c3c452d334601c53aebda4660e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6238 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Remove compatibility macros m4_ifblank and m4_ifnblank They are at least since Autoconf 2.67 present, and we are requiring version 2.69. Change-Id: I41b33d4ebe02198f03cdddcc4a3c1beedd993d78 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6239 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * configure.ac: use a separate folder for Autoconf-generated files Autoconf generates several files in root folder of the project. Keep the root folder cleaner by specifying subfolder 'build-aux'. Align .gitignore accordingly. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: Ied87faba495d9eeb8f98e78c2e2b7e7e596febfb Reviewed-on: http://openocd.zylin.com/6236 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * helper/command: silent debug msg on command register/unregister Commit e216186fab59 ("helper/command: register full-name commands in jim") and commit a7d68878e4ba ("helper/command: unregister commands through their full-name") introduce a LOG_DEBUG() message each for command registration and unregistration. The messages above are quite noisy and pollute the log when debug_level is 3 or higher. They can be useful to debug the command registration logic, but for the other debug activities on OpenOCD are just noisy. Already commit a03ac1ba3087 ("helper/command: disable logging of registered commands [RFC]") was merged to silent the first case that is now back with additional logs. Silent both log messages. Use 'if (false)' to silent them, making easy to re-enable it when or if someone needs it. Change-Id: Id8a067e60e822d4ecbddcb036d081298f7e6181f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6220 Tested-by: jenkins * mem_ap: fix target arch_info type The target mem_ap appears as an ARM target, thus it allows the execution of ARM specific commands causing the crash of OpenOCD. E.g. 'arm mrc ...' can be executed and segfaults. Replace the incorrect ARM magic number with a dedicated one. While there, remove the 'struct arm', that is now holding only the mem_ap's dap, and replace it with a pointer to the dap. Change-Id: I881332d3fdf8d8f8271b8711607737b052a5699b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6213 Tested-by: jenkins * riscv: drop unused variable The array newly_halted[] is assigned but its value is never used. Drop it! Change-Id: I678812a31c45a3ec03716e3eee6a30b8e8947926 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6257 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Tim Newsome <tim@sifive.com> * riscv: replace macro DIM() with ARRAY_SIZE() OpenOCD already defines the macro ARRAY_SIZE, while riscv code uses a local macro DIM. Prefer using the macro ARRAY_SIZE() instead of DIM(). Not all the riscv code has been upstreamed, yes; this patch only covers the code already upstreamed. Change-Id: I89a58a6d91916d85c53ba5e4091b558271f8d618 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6258 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * target/zynqmp : Add AXI AP access port The Xilinx Zynq UltraScale+ SoC have an "AXI-AP" access port for direct memory accesses without halting CPUs. Change-Id: I6303331c217795657575de4759444938e775dee1 Signed-off-by: Olivier DANET <odanet@caramail.com> Reviewed-on: http://openocd.zylin.com/6263 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/versaloon: use ARRAY_SIZE() Replace the custom macro dimof() with the OpenOCD macro ARRAY_SIZE(). Change-Id: I2fe638444f6c16f2a78c1fd558b21550f76282d6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6259 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> * openocd: use macro ARRAY_SIZE() There are still few cases where the macro ARRAY_SIZE() should be used in place of custom code. Use ARRAY_SIZE() whenever possible. Change-Id: Iba0127a02357bc704fe639e08562a4f9aa7011df Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6260 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins * rtos: use ARRAY_SIZE() and simplify rtos_type.create() Use the existing macro ARRAY_SIZE(). Rewrite the functions rtos_type.create() to simplify the logic. Change-Id: I8833354767045d1642801d26944c9087a77add00 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6261 Tested-by: jenkins * tcl: remove remaining deprecated commands There are still few adapter_khz, ftdi_location, jtag_nsrst_delay and xds110_serial strolling around ... Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6270 Tested-by: jenkins * help text: remove trailing space Some help text end with a useless space character. Remove it. Change-Id: I397e1194fac8042f0fab694222f925f906716de3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6222 Tested-by: jenkins * help: fix line size in 'usage' output The implementation of command 'usage' is broken while checking the line limit of 76 chars per line (e.g. 'usage load_image') and the line wrapping is not correct. The same broken code is used for the first output line of command 'help' too. When call command_help_show_wrap(), include the command's name in the string so the whole text would be wrapped. Change-Id: Idece01ce54994db7e851d8522435ff764b11f3ac Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6223 Tested-by: jenkins * LICENSES: Add the MIT license Add the full text of the MIT license to the kernel tree. It was copied directly from: https://spdx.org/licenses/MIT.html#licenseText Add the required tags for reference and tooling. Change-Id: I94a5dea5ced6421809ea2a3448f8dda19a93f5c9 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6219 Tested-by: jenkins * stlink: add comment of firmware version for each flag bit Change-Id: I7f7c7b9c9cfd88125f82662ed864a2c0715140b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6211 Tested-by: jenkins * stlink: reorder the flag macro by firmware release The corresponding bit for each macro is changed, but this is not relevant in the code. Change-Id: I7039464f5a3d55d008208f44952aadeb815bd5a3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6212 Tested-by: jenkins * tcl/board: Add ST NUCLEO-8S208RB Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6268 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_adi_v5: Fix clear sticky overrun flag during replay of commands When a WAIT occurs the commands after the WAIT are replayed and the STICKYORUN is cleared. However if another WAIT occurs during the command replay, the command itself is resent but the STICKYORUN bit shall also be cleared. If this is not done, the MEM-AP hangs. Change-Id: I14e8340cd5d8f58f4de31509da96cfa2ecb630d1 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6278 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoints The current implementation of OpenOCD does not support watchpoints for cortex_a architecture. So, I replaced the add_watchpoint and remove_watchpoint with the specific implementation for the cortex a and using the breakpoint implementation and the arm documentation [1] as reference. In particular, I have made the following changes: * added the following functions - cortex_a_add_watchpoint This wrapper function check whether there are any watchpoint available on the target device by calling cortex_a_set_watchpoint. - cortex_a_set_watchpoint This function is responsible for settings the watchpoint register pair. In particular, it sets the WVR and the WCR registers with the cortex_a_dap command. - cortex_a_remove_watchpoint This wrapper function the selected watchpoint on the target device by calling cortex_a_unset_watchpoint. - cortex_a_unset_watchpoint This function sets both the WVR and the WCR registers to zero, thus unsetting the watchpoint. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0464f/BCGDHIEJ.html Change-Id: I86611dab474cb84836662af572b17636dc68e282 Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it> Reviewed-on: http://openocd.zylin.com/3913 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * target/cortex_a: fix number of watchpoints Decrement the available watchpoints only when succeed setting it. Initialize the available watchpoint with the correct value. Change-Id: I0f93b347300b8ebedbcd9e718d4ba32b26cf6846 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6196 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoint length of 1, 2 and 4 bytes Use byte address select for 1 and 2 bytes length. Use normal mode for 4 bytes length. Change-Id: I28d182f25145d0635de64d0361d456f1ad96640e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6197 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: fix memory leak on watchpoints The memory allocated to hold the watchpoints is not freed at OpenOCD exit. Free the watchpoint memory at OpenOCD exit. Change-Id: I518c9ce0dc901cde2913d752e3154734f878b854 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6210 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * helper/jim-nvp: comply with coding style [1/2] The helper jim-nvp does not comply with OpenOCD coding style due to typedef of struct and CamelCase symbol names. While it's trivial fixing the helper and all its current use in the code, changing these APIs will potentially break a number of patches pending in gerrit. Gerrit will not trigger any alert, but the code will generate compile error after the merge. Add the compile flag "-Wno-error=deprecated-declarations" to keep as warning (not as error) the use of "deprecated" functions and types. Rename all the CamelCase symbols is lowercase and provide struct prototypes in place of the typedef. Add a DEPRECATED section to 'jim-nvp.h' where the old CamelCase symbols and the old typedef are re-declared with compile attribute 'deprecated'. With this change OpenOCD compiles, but generates warnings. The remaining changes allover OpenOCD code will be fixed in a separate patch for easier review. The patches merged later that still use the old deprecated API will compile with warnings. This will permit to identify and fix these cases. Change-Id: I786385d0f662dbb1be5be313ae42623156d68ce5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6183 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * helper/jim-nvp: comply with coding style [2/2] With the API fixed to comply with OpenOCD coding style, fix all the references in the code. Patch generated automatically with the script below. The list is in reverse order to replace a common prefix after the replacement of the symbols with the same prefix. %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF Jim_SetResult_NvpUnknown jim_set_result_nvp_unknown Jim_Nvp_value2name_simple jim_nvp_value2name_simple Jim_Nvp_value2name_obj jim_nvp_value2name_obj Jim_Nvp_value2name jim_nvp_value2name Jim_Nvp_name2value_simple jim_nvp_name2value_simple Jim_Nvp_name2value_obj_nocase jim_nvp_name2value_obj_nocase Jim_Nvp_name2value_obj jim_nvp_name2value_obj Jim_Nvp_name2value_nocase_simple jim_nvp_name2value_nocase_simple Jim_Nvp_name2value_nocase jim_nvp_name2value_nocase Jim_Nvp_name2value jim_nvp_name2value Jim_Nvp struct jim_nvp Jim_GetOpt_Wide jim_getopt_wide Jim_GetOpt_String jim_getopt_string Jim_GetOpt_Setup jim_getopt_setup Jim_GetOpt_Obj jim_getopt_obj Jim_GetOpt_NvpUnknown jim_getopt_nvp_unknown Jim_GetOpt_Nvp jim_getopt_nvp Jim_GetOpt_Enum jim_getopt_enum Jim_GetOpt_Double jim_getopt_double Jim_GetOpt_Debug jim_getopt_debug Jim_GetOptInfo struct jim_getopt_info Jim_GetNvp jim_get_nvp Jim_Debug_ArgvString jim_debug_argv_string EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find src -type f ! -name jim-nvp.\? ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I10a12bd64bb8b17575fd9150482c989c92b298a2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6184 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * server/telnet: fix autocomplete for jimtcl commands Current autocomplete filters-out some command reported by "info commands". One of the filter rule concerns the command's private data. Every command registered by OpenOCD has its 'struct command' as private data. By ignoring commands without private data, we loose several TCL commands registered by jimtcl, e.g. 'foreach', 'llength'. By assuming that every command with non-NULL private data has 'struct command' as private data, we risk at best to access inconsistent data, at worst to trigger a segmentation fault. Export the already available functions: - to check if a command has been registered by OpenOCD and - to get the private data. While there, rename jimcmd_is_ocd_command() as jimcmd_is_oocd_command(). Don't filter-out jimtcl commands with no private data. Check the private data only on OpenOCD commands. Change-Id: Ib5bf8d2bc5c12440c0cfae438f637c38724a79b7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6282 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * helper/list.h: align file to Linux v5.12 Main improvement is in the doxygen comments. Minimize the delta with kernel file. Skip the functions hlist_unhashed_lockless() and __list_del_clearprev() that are relevant only in kernel. Remove gcc extension "omitted conditional operand". Change-Id: I2e9ddb54cfe2fa5f7cf18f44726acd144e1f98b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6276 Reviewed-by: <rdiezmail-openocd@yahoo.de> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * contrib: add an example of using list.h Change-Id: Ic3d399d7ad2e4d10677cf78d64968040941b74e5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6280 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * helper/list.h: add mention to the example in contrib Without such reference, it could be difficult to find the example. Change-Id: Ia9ffb06bc1a45446c2c7b53197ab3400e1d8a9e9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6281 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * tcl/target/stm32f4x: fix hardcoded chip name Fixes: c945d6e61605 ("tcl/target: start using the new TPIU/SWO support") Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6277 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins * Makefile: add special target .DELETE_ON_ERROR The special .DELETE_ON_ERROR deletes the target file on recipe error. Otherwise, an incomplete output file may be considered up to date the next time around. .DELETE_ON_ERROR provides reasonable protection at virtually no cost. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: I67dca47ae5ddf3786993c87b9991b3046a85f00b Reviewed-on: http://openocd.zylin.com/6235 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * gdb_server: Log both incoming and outgoing GDB packets - Made sure that also outgoing GDB packets are logged, not only the incoming ones. - Improved the treatment of non-printable characters in the packets to make it more robust. Prior to this change: - Outgoing packets were not printed unless OpenOCD was re-compiled with _DEBUG_GDB_IO_. - Non-prinable characters were only treated in incoming 'X' packets. After this change: - Both incoming and outgoing GDB packets are logged on debug_level >= 3, so that both directions of the GDB channel are visible. - Non-printable characters are checked for in every packet so that hey do not interfere with the terminal. Change-Id: I0613e57ae5059b3279b0abcb71276cf5719a8699 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: http://openocd.zylin.com/6269 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devices Initial support for Renesas RZ/G2 MPU family Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6250 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/jlink: Remove trailing dots This makes the messages consistent with most of the rest of the OpenOCD output. Change-Id: I915a01187e7fc317e02483ac0bbd39ec077d6321 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6274 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target: Use 'bool' for 'reset_halt' Change-Id: I974a6360ea7467067511541ac212f2e9d3de7895 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6262 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cmsis_dap: add support for swo commands Replaced mixed snake_case_CamelCase with snake_case. Define variables at first-use location. CMSIS-DAP SWO specification: https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__swo__gr.html Change-Id: Ieba79b16efd445143f964b614673d041aae74f92 Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/5820 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Add target_data_bits(). This is used to compute memory block read alignment, and specifically allows 64-bit targets to ensure that memory block reads are only requested on 64-bit boundaries. Signed-off-by: Tim Newsome <tim@sifive.com> Change-Id: Idb1a27b9fc02c46245556bb0f3d6d94b368c4817 Reviewed-on: http://openocd.zylin.com/6249 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Jan Matyas <matyas@codasip.com> Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Avoid non-standard conditionals with omitted operands. Fixes bug #257. Change-Id: I05fc6468306d46399e769098e031e7e588798afc Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6271 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/startup.tcl: Do not use 'Yoda conditions' Change-Id: I5e1bbaf032659dda1b365ef4ec6ea4a635d921ce Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6284 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Fix build. Change-Id: I4f2667db91f84f07af354691aac5d4c9e3aea3fa Signed-off-by: Tim Newsome <tim@sifive.com> Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com> Co-authored-by: Marc Schink <dev@zapb.de> Co-authored-by: R. Diez <rdiezmail-openocd@yahoo.de> Co-authored-by: Daniel Anselmi <danselmi@gmx.ch> Co-authored-by: Evgeniy Didin <didin@synopsys.com> Co-authored-by: Yasushi SHOJI <yashi@spacecubics.com> Co-authored-by: Tomas Vanek <vanekt@fbl.cz> Co-authored-by: Olivier DANET <odanet@caramail.com> Co-authored-by: Thomas Gleixner <tglx@linutronix.de> Co-authored-by: micbis <michele.bisogno.ct@renesas.com> Co-authored-by: Chengyu Zheng <chengyu.zheng@polimi.it> Co-authored-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Co-authored-by: Jan Matyas <matyas@codasip.com> Co-authored-by: Adrian Negreanu <adrian.negreanu@nxp.com>
2021-06-11 15:01:55 -05:00
[expr {2 * $ddr_size}]]
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
} else {
TCL scripts: replace "puts" with "echo" Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-08 03:23:49 -06:00
echo [format \
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
"Single chip DDR memory. Memory size 0x%08x byte" \
$ddr_size]
}
}
# from Xloader file ddr/spr300_mt47h64m16_3_333_cl5_async.S
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
proc ddr_spr3xx_mt47h64m16_3_333_cl5_async {ddr_chips} {
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# DDR_PAD_REG
mww 0xfca800f0 0x00003aa5
# Use "1:2 sync" only when DDR clock source is PLL1 and
# HCLK is half of PLL1
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600000 0x00000001 ;# MEMCTL_AHB_SET_00 # This is async
mww 0xfc600004 0x00000000 ;# MEMCTL_AHB_SET_01
# mww 0xfc600000 0x02020201 ;# MEMCTL_AHB_SET_00 # This is 1:2 sync
# mww 0xfc600004 0x02020202 ;# MEMCTL_AHB_SET_01
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600008 0x01000000 ;# MEMCTL_RFSH_SET_00
mww 0xfc60000c 0x00000101 ;# MEMCTL_DLL_SET_00
mww 0xfc600010 0x00000101 ;# MEMCTL_GP_00
mww 0xfc600014 0x01000000 ;# MEMCTL_GP_01
mww 0xfc600018 0x00010001 ;# MEMCTL_GP_02
mww 0xfc60001c 0x00000100 ;# MEMCTL_GP_03
mww 0xfc600020 0x00010001 ;# MEMCTL_GP_04
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
if { $ddr_chips == 2 } {
mww 0xfc600024 0x01020203 ;# MEMCTL_GP_05
mww 0xfc600028 0x01000102 ;# MEMCTL_GP_06
mww 0xfc60002c 0x02000202 ;# MEMCTL_AHB_SET_02
} else {
mww 0xfc600024 0x00000201 ;# MEMCTL_GP_05
mww 0xfc600028 0x02000001 ;# MEMCTL_GP_06
mww 0xfc60002c 0x02000201 ;# MEMCTL_AHB_SET_02
}
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600030 0x04040105 ;# MEMCTL_AHB_SET_03
mww 0xfc600034 0x03030302 ;# MEMCTL_AHB_SET_04
mww 0xfc600038 0x02040101 ;# MEMCTL_AHB_SET_05
mww 0xfc60003c 0x00000002 ;# MEMCTL_AHB_SET_06
mww 0xfc600044 0x03000405 ;# MEMCTL_DQS_SET_0
mww 0xfc600048 0x03040002 ;# MEMCTL_TIME_SET_01
mww 0xfc60004c 0x04000305 ;# MEMCTL_TIME_SET_02
mww 0xfc600050 0x0505053f ;# MEMCTL_AHB_RELPR_00
mww 0xfc600054 0x05050505 ;# MEMCTL_AHB_RELPR_01
mww 0xfc600058 0x04040405 ;# MEMCTL_AHB_RELPR_02
mww 0xfc60005c 0x04040404 ;# MEMCTL_AHB_RELPR_03
mww 0xfc600060 0x03030304 ;# MEMCTL_AHB_RELPR_04
mww 0xfc600064 0x03030303 ;# MEMCTL_AHB_RELPR_05
mww 0xfc600068 0x02020203 ;# MEMCTL_AHB_RELPR_06
mww 0xfc60006c 0x02020202 ;# MEMCTL_AHB_RELPR_07
mww 0xfc600070 0x01010102 ;# MEMCTL_AHB_RELPR_08
mww 0xfc600074 0x01010101 ;# MEMCTL_AHB_RELPR_09
mww 0xfc600078 0x00000001 ;# MEMCTL_AHB_RELPR_10
mww 0xfc600088 0x0a0c0a00 ;# MEMCTL_DQS_SET_1
mww 0xfc60008c 0x0000023f ;# MEMCTL_GP_07
mww 0xfc600090 0x00050a00 ;# MEMCTL_GP_08
mww 0xfc600094 0x11000000 ;# MEMCTL_GP_09
mww 0xfc600098 0x00001302 ;# MEMCTL_GP_10
mww 0xfc60009c 0x00001c1c ;# MEMCTL_DLL_SET_01
mww 0xfc6000a0 0x7c000000 ;# MEMCTL_DQS_OUT_SHIFT
mww 0xfc6000a4 0x005c0000 ;# MEMCTL_WR_DQS_SHIFT
mww 0xfc6000a8 0x2b050e00 ;# MEMCTL_TIME_SET_03
mww 0xfc6000ac 0x00640064 ;# MEMCTL_AHB_PRRLX_00
mww 0xfc6000b0 0x00640064 ;# MEMCTL_AHB_PRRLX_01
mww 0xfc6000b4 0x00000064 ;# MEMCTL_AHB_PRRLX_02
mww 0xfc6000b8 0x00000000 ;# MEMCTL_OUTRANGE_LGTH
mww 0xfc6000bc 0x00200020 ;# MEMCTL_AHB_RW_SET_00
mww 0xfc6000c0 0x00200020 ;# MEMCTL_AHB_RW_SET_01
mww 0xfc6000c4 0x00200020 ;# MEMCTL_AHB_RW_SET_02
mww 0xfc6000c8 0x00200020 ;# MEMCTL_AHB_RW_SET_03
mww 0xfc6000cc 0x00200020 ;# MEMCTL_AHB_RW_SET_04
mww 0xfc6000d8 0x00000a24 ;# MEMCTL_TREF
mww 0xfc6000dc 0x00000000 ;# MEMCTL_EMRS3_DATA
mww 0xfc6000e0 0x5b1c00c8 ;# MEMCTL_TIME_SET_04
mww 0xfc6000e4 0x00c8002e ;# MEMCTL_TIME_SET_05
mww 0xfc6000e8 0x00000000 ;# MEMCTL_VERSION
mww 0xfc6000ec 0x0001046b ;# MEMCTL_TINIT
mww 0xfc6000f0 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_01
mww 0xfc6000f4 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_02
mww 0xfc600104 0x001c0000 ;# MEMCTL_DLL_DQS_DELAY_BYPASS_0
mww 0xfc600108 0x0019001c ;# MEMCTL_DLL_SET_02
mww 0xfc60010c 0x00100000 ;# MEMCTL_DLL_SET_03
mww 0xfc600110 0x001e007a ;# MEMCTL_DQS_SET_2
mww 0xfc600188 0x00000000 ;# MEMCTL_USER_DEF_REG_0
mww 0xfc60018c 0x00000000 ;# MEMCTL_USER_DEF_REG_1
mww 0xfc600190 0x01010001 ;# MEMCTL_GP_11
mww 0xfc600194 0x01000000 ;# MEMCTL_GP_12
mww 0xfc600198 0x00000001 ;# MEMCTL_GP_13
mww 0xfc60019c 0x00400000 ;# MEMCTL_GP_14
mww 0xfc6001a0 0x00000000 ;# MEMCTL_EMRS2_DATA_X
mww 0xfc6001a4 0x00000000 ;# MEMCTL_LWPWR_CNT
mww 0xfc6001a8 0x00000000 ;# MEMCTL_LWPWR_REG
mww 0xfc6001ac 0x00860000 ;# MEMCTL_GP_15
mww 0xfc6001b0 0x00000002 ;# MEMCTL_TPDEX
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
}