interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/st_nucleo_f103rb.cfg

11 lines
269 B
INI
Raw Normal View History

cfg: Added st nucleo board configs. This patch adds board configs for Nucleo FXXX boards. Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-05 15:49:14 -06:00
# This is an ST NUCLEO F103RB board with a single STM32F103RBT6 chip.
# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF259875
source [find interface/stlink-v2-1.cfg]
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
transport select hla_swd
source [find target/stm32f1x.cfg]
cfg: Added st nucleo board configs. This patch adds board configs for Nucleo FXXX boards. Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-05 15:49:14 -06:00
cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-10 04:19:26 -06:00
reset_config srst_only