interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/icnova_imx53_sodimm.cfg

445 lines
16 KiB
INI
Raw Normal View History

cfg: add icnova_imx53_sodimm board config Add board config for In-Circuit ICnova iMX53 SODIMM Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/543 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-27 03:32:33 -05:00
#################################################################################################
# Author: Benjamin Tietz <benjamin.tietz@in-circuit.de> ;#
# based on work from: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> ;#
# Kiwigrid GmbH ;#
# Generated for In-Circuit i.MX53 SO-Dimm ;#
#################################################################################################
# The In-Circuit ICnova IMX53SODIMM board has a single IMX53 chip
source [find target/imx53.cfg]
# Helper for common memory read/modify/write procedures
source [find mem_helper.tcl]
echo "i.MX53 SO-Dimm board lodaded."
# Set reset type
#reset_config srst_only
adapter_khz 3000
$_TARGETNAME configure -event "reset-assert" {
echo "Reseting ...."
target: rename cortex_a8 to cortex_a Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-02-01 09:43:21 -06:00
#cortex_a dbginit
cfg: add icnova_imx53_sodimm board config Add board config for In-Circuit ICnova iMX53 SODIMM Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/543 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-27 03:32:33 -05:00
}
$_TARGETNAME configure -event reset-init { sodimm_init }
global AIPS1_BASE_ADDR
set AIPS1_BASE_ADDR 0x53F00000
global AIPS2_BASE_ADDR
set AIPS2_BASE_ADDR 0x63F00000
proc sodimm_init { } {
echo "Reset-init..."
; # halt the CPU
halt
echo "HW version [format %x [mrw 0x48]]"
dap apsel 1
DCD
; # ARM errata ID #468414
set tR [arm mrc 15 0 1 0 1]
arm mcr 15 0 1 0 1 [expr $tR | (1<<5)] ; # enable L1NEON bit
init_l2cc
init_aips
init_clock
dap apsel 0
; # Force ARM state
; #reg cpsr 0x000001D3
arm core_state arm
jtag_rclk 3000
# adapter_khz 3000
}
# L2CC Cache setup/invalidation/disable
proc init_l2cc { } {
; #/* explicitly disable L2 cache */
; #mrc 15, 0, r0, c1, c0, 1
set tR [arm mrc 15 0 1 0 1]
; #bic r0, r0, #0x2
; #mcr 15, 0, r0, c1, c0, 1
arm mcr 15 0 1 0 1 [expr $tR & ~(1<<2)]
; #/* reconfigure L2 cache aux control reg */
; #mov r0, #0xC0 /* tag RAM */
; #add r0, r0, #0x4 /* data RAM */
; #orr r0, r0, #(1 << 24) /* disable write allocate delay */
; #orr r0, r0, #(1 << 23) /* disable write allocate combine */
; #orr r0, r0, #(1 << 22) /* disable write allocate */
; #mcr 15, 1, r0, c9, c0, 2
arm mcr 15 1 9 0 2 [expr 0xC4 | (1<<24) | (1<<23) | (1<22)]
}
# AIPS setup - Only setup MPROTx registers.
# The PACR default values are good.
proc init_aips { } {
; # Set all MPROTx to be non-bufferable, trusted for R/W,
; # not forced to user-mode.
global AIPS1_BASE_ADDR
global AIPS2_BASE_ADDR
set VAL 0x77777777
# dap apsel 1
mww [expr $AIPS1_BASE_ADDR + 0x0] $VAL
mww [expr $AIPS1_BASE_ADDR + 0x4] $VAL
mww [expr $AIPS2_BASE_ADDR + 0x0] $VAL
mww [expr $AIPS2_BASE_ADDR + 0x4] $VAL
# dap apsel 0
}
proc init_clock { } {
global AIPS1_BASE_ADDR
global AIPS2_BASE_ADDR
set CCM_BASE_ADDR [expr $AIPS1_BASE_ADDR + 0x000D4000]
set CLKCTL_CCSR 0x0C
set CLKCTL_CBCDR 0x14
set CLKCTL_CBCMR 0x18
set PLL1_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00080000]
set PLL2_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00084000]
set PLL3_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00088000]
set PLL4_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x0008C000]
set CLKCTL_CSCMR1 0x1C
set CLKCTL_CDHIPR 0x48
set PLATFORM_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x000A0000]
set CLKCTL_CSCDR1 0x24
set CLKCTL_CCDR 0x04
; # Switch ARM to step clock
mww [expr $CCM_BASE_ADDR + $CLKCTL_CCSR] 0x4
return
echo "not returned"
setup_pll $PLL1_BASE_ADDR 800
setup_pll $PLL3_BASE_ADDR 400
; # Switch peripheral to PLL3
mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCMR] 0x00015154
mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCDR] [expr 0x02888945 | (1<<16)]
while {[mrw [expr $CCM_BASE_ADDR + $CLKCTL_CDHIPR]] != 0} { sleep 1 }
setup_pll $PLL2_BASE_ADDR 400
; # Switch peripheral to PLL2
mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCDR] [expr 0x00808145 | (2<<10) | (9<<16) | (1<<19)]
mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCMR] 0x00016154
; # change uart clk parent to pll2
mww [expr $CCM_BASE_ADDR + $CLKCTL_CSCMR1] [expr [mrw [expr $CCM_BASE_ADDR + $CLKCTL_CSCMR1]] & 0xfcffffff | 0x01000000]
; # make sure change is effective
while {[mrw [expr $CCM_BASE_ADDR + $CLKCTL_CDHIPR]] != 0} { sleep 1 }
setup_pll $PLL3_BASE_ADDR 216
setup_pll $PLL4_BASE_ADDR 455
; # Set the platform clock dividers
mww [expr $PLATFORM_BASE_ADDR + 0x14] 0x00000124
mww [expr $CCM_BASE_ADDR + 0x10] 0
; # Switch ARM back to PLL 1.
mww [expr $CCM_BASE_ADDR + $CLKCTL_CCSR] 0x0
; # make uart div=6
mww [expr $CCM_BASE_ADDR + $CLKCTL_CSCDR1] [expr [mrw [expr $CCM_BASE_ADDR + $CLKCTL_CSCDR1]] & 0xffffffc0 | 0x0a]
; # Restore the default values in the Gate registers
mww [expr $CCM_BASE_ADDR + 0x68] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x6C] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x70] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x74] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x78] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x7C] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x80] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + 0x84] 0xFFFFFFFF
mww [expr $CCM_BASE_ADDR + $CLKCTL_CCDR] 0x00000
; # for cko - for ARM div by 8
mww [expr $CCM_BASE_ADDR + 0x60] [expr 0x000A0000 & 0x00000F0]
}
proc setup_pll { PLL_ADDR CLK } {
set PLL_DP_CTL 0x00
set PLL_DP_CONFIG 0x04
set PLL_DP_OP 0x08
set PLL_DP_HFS_OP 0x1C
set PLL_DP_MFD 0x0C
set PLL_DP_HFS_MFD 0x20
set PLL_DP_MFN 0x10
set PLL_DP_HFS_MFN 0x24
if {$CLK == 1000} {
set DP_OP [expr (10 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (12 - 1)]
set DP_MFN 5
} elseif {$CLK == 850} {
set DP_OP [expr (8 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (48 - 1)]
set DP_MFN 41
} elseif {$CLK == 800} {
set DP_OP [expr (8 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (3 - 1)]
set DP_MFN 1
} elseif {$CLK == 700} {
set DP_OP [expr (7 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (24 - 1)]
set DP_MFN 7
} elseif {$CLK == 600} {
set DP_OP [expr (6 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (4 - 1)]
set DP_MFN 1
} elseif {$CLK == 665} {
set DP_OP [expr (6 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (96 - 1)]
set DP_MFN 89
} elseif {$CLK == 532} {
set DP_OP [expr (5 << 4) + ((1 - 1) << 0)]
set DP_MFD [expr (24 - 1)]
set DP_MFN 13
} elseif {$CLK == 455} {
set DP_OP [expr (8 << 4) + ((2 - 1) << 0)]
set DP_MFD [expr (48 - 1)]
set DP_MFN 71
} elseif {$CLK == 400} {
set DP_OP [expr (8 << 4) + ((2 - 1) << 0)]
set DP_MFD [expr (3 - 1)]
set DP_MFN 1
} elseif {$CLK == 216} {
set DP_OP [expr (6 << 4) + ((3 - 1) << 0)]
set DP_MFD [expr (4 - 1)]
set DP_MFN 3
} else {
error "Error (setup_dll): clock not found!"
}
mww [expr $PLL_ADDR + $PLL_DP_CTL] 0x00001232
mww [expr $PLL_ADDR + $PLL_DP_CONFIG] 0x2
mww [expr $PLL_ADDR + $PLL_DP_OP] $DP_OP
mww [expr $PLL_ADDR + $PLL_DP_HFS_MFD] $DP_OP
mww [expr $PLL_ADDR + $PLL_DP_MFD] $DP_MFD
mww [expr $PLL_ADDR + $PLL_DP_HFS_MFD] $DP_MFD
mww [expr $PLL_ADDR + $PLL_DP_MFN] $DP_MFN
mww [expr $PLL_ADDR + $PLL_DP_HFS_MFN] $DP_MFN
mww [expr $PLL_ADDR + $PLL_DP_CTL] 0x00001232
while {[expr [mrw [expr $PLL_ADDR + $PLL_DP_CTL]] & 0x1] == 0} { sleep 1 }
}
proc CPU_2_BE_32 { L } {
return [expr (($L & 0x000000FF) << 24) | (($L & 0x0000FF00) << 8) | (($L & 0x00FF0000) >> 8) | (($L & 0xFF000000) >> 24)]
}
# Device Configuration Data
proc DCD { } {
# dap apsel 1
#*========================================================================================== ======
# Initialization script for 32 bit DDR3 (CS0+CS1)
#*========================================================================================== ======
# Remux D24/D25 to perform Flash-access
mww 0x53fa818C 0x00000000 ; #EIM_RW
mww 0x53fa8180 0x00000000 ; #EIM_CS0
mww 0x53fa8188 0x00000000 ; #EIM_OE
mww 0x53fa817C 0x00000000 ; #A16
mww 0x53fa8178 0x00000000 ; #A17
mww 0x53fa8174 0x00000000 ; #A18
mww 0x53fa8170 0x00000000 ; #A19
mww 0x53fa816C 0x00000000 ; #A20
mww 0x53fa8168 0x00000000 ; #A21
mww 0x53fa819C 0x00000000 ; #DA0
mww 0x53fa81A0 0x00000000 ; #DA1
mww 0x53fa81A4 0x00000000 ; #DA2
mww 0x53fa81A8 0x00000000 ; #DA3
mww 0x53fa81AC 0x00000000 ; #DA4
mww 0x53fa81B0 0x00000000 ; #DA5
mww 0x53fa81B4 0x00000000 ; #DA6
mww 0x53fa81B8 0x00000000 ; #DA7
mww 0x53fa81BC 0x00000000 ; #DA8
mww 0x53fa81C0 0x00000000 ; #DA9
mww 0x53fa81C4 0x00000000 ; #DA10
mww 0x53fa81C8 0x00000000 ; #DA11
mww 0x53fa81CC 0x00000000 ; #DA12
mww 0x53fa81D0 0x00000000 ; #DA13
mww 0x53fa81D4 0x00000000 ; #DA14
mww 0x53fa81D8 0x00000000 ; #DA15
mww 0x53fa8118 0x00000000 ; #D16
mww 0x53fa811C 0x00000000 ; #D17
mww 0x53fa8120 0x00000000 ; #D18
mww 0x53fa8124 0x00000000 ; #D19
mww 0x53fa8128 0x00000000 ; #D20
mww 0x53fa812C 0x00000000 ; #D21
mww 0x53fa8130 0x00000000 ; #D22
mww 0x53fa8134 0x00000000 ; #D23
mww 0x53fa813c 0x00000000 ; #IOMUXC_SW_PAD_CTL_PAD_EIM_D24
mww 0x53fa8140 0x00000000 ; #IOMUXC_SW_PAD_CTL_PAD_EIM_D25
mww 0x53fa8144 0x00000000 ; #D26
mww 0x53fa8148 0x00000000 ; #D27
mww 0x53fa814C 0x00000000 ; #D28
mww 0x53fa8150 0x00000000 ; #D29
mww 0x53fa8154 0x00000000 ; #D30
mww 0x53fa8158 0x00000000 ; #D31
# DDR3 IOMUX configuration
#* Global pad control options */
mww 0x53fa8554 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3
mww 0x53fa8558 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3
mww 0x53fa8560 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2
mww 0x53fa8564 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1
mww 0x53fa8568 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2
mww 0x53fa8570 0x00200000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 - boazp: weaker sdclk EVK DDR max frequency
mww 0x53fa8574 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS
mww 0x53fa8578 0x00200000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 - boazp: weaker sdclk EVK DDR max frequency
mww 0x53fa857c 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0
mww 0x53fa8580 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0
mww 0x53fa8584 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0
mww 0x53fa8588 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS
mww 0x53fa8590 0x00380040 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1
mww 0x53fa8594 0x00380000 ; #IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1
mww 0x53fa86f0 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_ADDDS
mww 0x53fa86f4 0x00000200 ; #IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL
mww 0x53fa86fc 0x00000000 ; #IOMUXC_SW_PAD_CTL_GRP_DDRPKE
# mww 0x53fa8714 0x00000200 ; #IOMUXC_SW_PAD_CTL_GRP_DDRMODE - CMOS mode XXX
mww 0x53fa8714 0x00000000 ; #IOMUXC_SW_PAD_CTL_GRP_DDRMODE - CMOS mode XXX
mww 0x53fa8718 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_B0DS
mww 0x53fa871c 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_B1DS
mww 0x53fa8720 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_CTLDS
mww 0x53fa8724 0x00000000 ; #IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE - DDR_SEL=0 XXX
mww 0x53fa8728 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_B2DS
mww 0x53fa872c 0x00380000 ; #IOMUXC_SW_PAD_CTL_GRP_B3DS
# mww 0x53fa86f4 0x00000000 ;IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL for sDQS[3:0], 1=DDR2, 0=CMOS mode
# mww 0x53fa8714 0x00000000 ;IOMUXC_SW_PAD_CTL_GRP_DDRMODE for D[31:0], 1=DDR2, 0=CMOS mode
# mww 0x53fa86fc 0x00000000 ;IOMUXC_SW_PAD_CTL_GRP_DDRPKE
# mww 0x53fa8724 0x00000000 ;IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE - DDR_SEL=00
#* Data bus byte lane pad drive strength control options */
# mww 0x53fa872c 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_B3DS
# mww 0x53fa8554 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3
# mww 0x53fa8558 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3
# mww 0x53fa8728 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_B2DS
# mww 0x53fa8560 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2
# mww 0x53fa8568 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2
# mww 0x53fa871c 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_B1DS
# mww 0x53fa8594 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1
# mww 0x53fa8590 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1
# mww 0x53fa8718 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_B0DS
# mww 0x53fa8584 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0
# mww 0x53fa857c 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0
#* SDCLK pad drive strength control options */
# mww 0x53fa8578 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0
# mww 0x53fa8570 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1
#* Control and addr bus pad drive strength control options */
# mww 0x53fa8574 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS
# mww 0x53fa8588 0x00300000 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS
# mww 0x53fa86f0 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_ADDDS for DDR addr bus
# mww 0x53fa8720 0x00300000 ;IOMUXC_SW_PAD_CTL_GRP_CTLDS for CSD0, CSD1, SDCKE0, SDCKE1, SDWE
# mww 0x53fa8564 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1
# mww 0x53fa8580 0x00300040 ;IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0
# Initialize DDR3 memory - Micron MT41J128M16-187Er
#** Keep for now, same setting as CPU3 board **#
mww 0x63fd901c 0x00008000
# mww 0x63fd904c 0x01680172 ; #write leveling reg 0
# mww 0x63fd9050 0x0021017f ; #write leveling reg 1
mww 0x63fd9088 0x32383535 ; #read delay lines
mww 0x63fd9090 0x40383538 ; #write delay lines
# mww 0x63fd90F8 0x00000800 ; #Measure unit
mww 0x63fd907c 0x0136014d ; #DQS gating 0
mww 0x63fd9080 0x01510141 ; #DQS gating 1
#* CPU3 Board settingr
# Enable bank interleaving, Address mirror on, WALAT 0x1, RALAT = 0x5, DDR2_EN = 0
# mww 0x63fd9018 0x00091740 ; #Misc register:
#* Quick Silver board setting
# Enable bank interleaving, Address mirror off, WALAT 0x1, RALAT = 0x5, DDR2_EN = 0
mww 0x63fd9018 0x00011740 ; #Misc register
# Enable CSD0 and CSD1, row width = 14, column width = 10, burst length = 8, data width = 32bit
# mww 0x63fd9000 0xc3190000 ; #Main control register
# Enable CSD0 and CSD1, row width = 14, column width = 10, burst length = 8, data width = 32bit
mww 0x63fd9000 0x83190000 ; #Main control register
# tRFC=64ck;tXS=68;tXP=3;tXPDLL=10;tFAW=15;CAS=6ck
mww 0x63fd900C 0x555952E3 ; #timing configuration Reg 0
# tRCD=6;tRP=6;tRC=21;tRAS=15;tRPA=1;tWR=6;tMRD=4;tCWL=5ck
mww 0x63fd9010 0xb68e8b63 ; #timing configuration Reg 1
# tDLLK(tXSRD)=512 cycles; tRTP=4;tWTR=4;tRRD=4
mww 0x63fd9014 0x01ff00db ; #timing configuration Reg 2
mww 0x63fd902c 0x000026d2 ; #command delay (default)
mww 0x63fd9030 0x009f0e21 ; #out of reset delays
# Keep tAOFPD, tAONPD, tANPD, and tAXPD as default since they are bigger than calc values
mww 0x63fd9008 0x12273030 ; #ODT timings
# tCKE=3; tCKSRX=5; tCKSRE=5
mww 0x63fd9004 0x0002002d
#Power down control
#**********************************
#DDR device configuration:
#**********************************
#**********************************
# CS0:
#**********************************
mww 0x63fd901c 0x00008032 ; #write mode reg MR2 with cs0 (see below for settings)
# Full array self refresh
# Rtt_WR disabled (no ODT at IO CMOS operation)
# Manual self refresh
# CWS=5
mww 0x63fd901c 0x00008033 ; #write mode reg MR3 with cs0.
mww 0x63fd901c 0x00028031 ; #write mode reg MR1 with cs0. ODS=01: out buff= RZQ/7 (see below for settings)
# out impedance = RZQ/7
# Rtt_nom disabled (no ODT at IO CMOS operation)
# Aditive latency off
# write leveling disabled
# tdqs (differential?) disabled
mww 0x63fd901c 0x09208030 ; #write mode reg MR0 with cs0 , with dll_rst0
mww 0x63fd901c 0x04008040 ; #ZQ calibration with cs0 (A10 high indicates ZQ cal long ZQCL)
#**********************************
# CS1:
#**********************************
# mww 0x63fd901c 0x0000803a ; #write mode reg MR2 with cs1.
# mww 0x63fd901c 0x0000803b ; #write mode reg MR3 with cs1.
# mww 0x63fd901c 0x00028039 ; #write mode reg MR1 with cs1. ODS=01: out buff= RZQ/7
# mww 0x63fd901c 0x09208138 ; #write mode reg MR0 with cs1.
# mww 0x63fd901c 0x04008048 ; #ZQ calibration with cs1(A10 high indicates ZQ cal long ZQCL)
#**********************************
mww 0x63fd9020 0x00001800 ; # Refresh control register
mww 0x63fd9040 0x04b80003 ; # ZQ HW control
mww 0x63fd9058 0x00022227 ; # ODT control register
mww 0x63fd901c 0x00000000
# CLKO muxing (comment out for now till needed to avoid conflicts with intended usage of signals)
# mww 0x53FA8314 = 0
# mww 0x53FA8320 0x4
# mww 0x53FD4060 0x01e900f0
# dap apsel 0
}
# IRAM
$_TARGETNAME configure -work-area-phys 0xF8000000 -work-area-size 0x20000 -work-area-backup 1
flash bank mx535_nor cfi 0xf0000000 0x800000 2 2 $_TARGETNAME
# vim:filetype=tcl