riscv-openocd/tcl/target/ti_k3.cfg

# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (C) 2019-2021 Texas Instruments Incorporated - http://www.ti.com/
#
# Texas Instruments K3 devices:
# * AM654x: https://www.ti.com/lit/pdf/spruid7
#  Has 4 ARMV8 Cores and 2 R5 Cores and an M3
# * J721E: https://www.ti.com/lit/pdf/spruil1
#  Has 2 ARMV8 Cores and 6 R5 Cores and an M3
# * J7200: https://www.ti.com/lit/pdf/spruiu1
#  Has 2 ARMV8 Cores and 4 R5 Cores and an M3
# * AM642: https://www.ti.com/lit/pdf/spruim2
#  Has 2 ARMV8 Cores and 4 R5 Cores, M4F and an M3
#

if { [info exists SOC] } {
	set _soc $SOC
} else {
	set _soc am654
}

# set V8_SMP_DEBUG to non 0 value in board if you'd like to use SMP debug
if { [info exists V8_SMP_DEBUG] } {
	set _v8_smp_debug $V8_SMP_DEBUG
} else {
	set _v8_smp_debug 0
}

# Common Definitions

# CM3 the very first processor - all current SoCs have it.
set CM3_CTIBASE		{0x3C016000}

# M3 power-ap unlock offsets
set _m3_ap_unlock_offsets {0xf0 0x44}

# All the ARMV8s are the next processors.
#		   CL0,CORE0  CL0,CORE1  CL1,CORE0  CL1,CORE1
set ARMV8_DBGBASE {0x90410000 0x90510000 0x90810000 0x90910000}
set ARMV8_CTIBASE {0x90420000 0x90520000 0x90820000 0x90920000}

# And we add up the R5s
#		(0)MCU 0   (1)MCU 1   (2)MAIN_0_0 (3)MAIN_0_1 (4)MAIN_1_0 (5)MAIN_1_1
set R5_DBGBASE {0x9d010000 0x9d012000 0x9d410000 0x9d412000 0x9d510000 0x9d512000}
set R5_CTIBASE {0x9d018000 0x9d019000 0x9d418000 0x9d419000 0x9d518000 0x9d519000}

# Finally an M4F
set CM4_CTIBASE		{0x20001000}

# M4 may be present on some very few SoCs
set _mcu_m4_cores 0
# M4 power-ap unlock offsets
set _m4_ap_unlock_offsets {0xf0 0x60}

# Set configuration overrides for each SOC
switch $_soc {
	am654 {
		set _CHIPNAME am654
		set _K3_DAP_TAPID 0x0bb5a02f

		# AM654 has 2 clusters of 2 A53 cores each.
		set _armv8_cpu_name a53
		set _armv8_cores 4

		# AM654 has 1 cluster of 2 R5s cores.
		set _r5_cores 2
		set _mcu_r5_cores 2
		set _mcu_base_core_id 0
		set _main0_r5_cores 0
		set _main0_base_core_id 0
		set _main1_r5_cores 0
		set _main1_base_core_id 0

		# M3 power-ap unlock offsets
		set _m3_ap_unlock_offsets {0xf0 0x50}
	}
	am642 {
		set _CHIPNAME am642
		set _K3_DAP_TAPID 0x0bb3802f

		# AM642 has 1 clusters of 2 A53 cores each.
		set _armv8_cpu_name a53
		set _armv8_cores 2
		set ARMV8_DBGBASE {0x90010000 0x90110000}
		set ARMV8_CTIBASE {0x90020000 0x90120000}

		# AM642 has 2 cluster of 2 R5s cores.
		set _r5_cores 4
		set _mcu_r5_cores 0
		set _mcu_base_core_id 0
		set _main0_r5_cores 2
		set _main0_base_core_id 0
		set _main1_r5_cores 2
		set _main1_base_core_id 2
		set R5_DBGBASE {0x9d410000 0x9d412000 0x9d510000 0x9d512000}
		set R5_CTIBASE {0x9d418000 0x9d419000 0x9d518000 0x9d519000}

		# M4 processor
		set _mcu_m4_cores 1
	}
	j721e {
		set _CHIPNAME j721e
		set _K3_DAP_TAPID 0x0bb6402f
		# J721E has 1 cluster of 2 A72 cores.
		set _armv8_cpu_name a72
		set _armv8_cores 2

		# J721E has 3 clusters of 2 R5 cores each.
		set _r5_cores 6
		set _mcu_r5_cores 2
		set _mcu_base_core_id 0
		set _main0_r5_cores 2
		set _main0_base_core_id 2
		set _main1_r5_cores 2
		set _main1_base_core_id 4
	}
	j7200 {
		set _CHIPNAME j7200
		set _K3_DAP_TAPID 0x0bb6d02f

		# J7200 has 1 cluster of 2 A72 cores.
		set _armv8_cpu_name a72
		set _armv8_cores 2

		# J7200 has 2 clusters of 2 R5 cores each.
		set _r5_cores 4
		set _mcu_r5_cores 2
		set _mcu_base_core_id 0
		set _main0_r5_cores 2
		set _main0_base_core_id 2
		set _main1_r5_cores 0
		set _main1_base_core_id 0
		set R5_DBGBASE {0x9d010000 0x9d012000 0x9d110000 0x9d112000}
		set R5_CTIBASE {0x9d018000 0x9d019000 0x9d118000 0x9d119000}

		# M3 CTI base
		set CM3_CTIBASE {0x20001000}
	}
	default {
		echo "'$_soc' is invalid!"
	}
}

jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_K3_DAP_TAPID -ignore-version
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

set _TARGETNAME $_CHIPNAME.cpu

set _CTINAME $_CHIPNAME.cti

# M3 is always present
cti create $_CTINAME.m3 -dap $_CHIPNAME.dap -ap-num 7 -baseaddr [lindex $CM3_CTIBASE 0]
target create $_TARGETNAME.m3 cortex_m -dap $_CHIPNAME.dap -ap-num 7 -defer-examine
$_TARGETNAME.m3 configure -event reset-assert { }

proc m3_up { args } {
	# To access M3, we need to enable the JTAG access for the same.
	# Ensure Power-AP unlocked
	$::_CHIPNAME.dap apreg 3 [lindex $::_m3_ap_unlock_offsets 0] 0x00190000
	$::_CHIPNAME.dap apreg 3 [lindex $::_m3_ap_unlock_offsets 1] 0x00102098

	$::_TARGETNAME.m3 arp_examine
}

set _v8_smp_targets ""

for { set _core 0 } { $_core < $_armv8_cores } { incr _core } {

	cti create $_CTINAME.$_armv8_cpu_name.$_core -dap $_CHIPNAME.dap -ap-num 1 \
		-baseaddr [lindex $ARMV8_CTIBASE $_core]

	target create $_TARGETNAME.$_armv8_cpu_name.$_core aarch64 -dap $_CHIPNAME.dap \
		-dbgbase [lindex $ARMV8_DBGBASE $_core] -cti $_CTINAME.$_armv8_cpu_name.$_core -defer-examine

	set _v8_smp_targets "$_v8_smp_targets $_TARGETNAME.$_armv8_cpu_name.$_core"
}

# Setup ARMV8 proc commands based on CPU to prevent people confusing SoCs
set _armv8_up_cmd "$_armv8_cpu_name"_up
# Available if V8_SMP_DEBUG is set to non-zero value
set _armv8_smp_cmd "$_armv8_cpu_name"_smp

if { $_v8_smp_debug == 0 } {
	proc $_armv8_up_cmd { args } {
		foreach { _core } [set args] {
			$::_TARGETNAME.$::_armv8_cpu_name.$_core arp_examine
			$::_TARGETNAME.$::_armv8_cpu_name.$_core aarch64 dbginit
		}
	}
} else {
	proc $_armv8_smp_cmd { args } {
		for { set _core 0 } { $_core < $::_armv8_cores } { incr _core } {
			$::_TARGETNAME.$::_armv8_cpu_name.$_core arp_examine
			$::_TARGETNAME.$::_armv8_cpu_name.$_core aarch64 dbginit
			$::_TARGETNAME.$::_armv8_cpu_name.$_core aarch64 smp on
		}
		# Set Default target are core 0
		targets $::_TARGETNAME.$::_armv8_cpu_name.0
	}

	# Declare SMP
	target smp $:::_v8_smp_targets
}

for { set _core 0 } { $_core < $_r5_cores } { incr _core } {
	cti create $_CTINAME.r5.$_core -dap $_CHIPNAME.dap -ap-num 1 \
		-baseaddr [lindex $R5_CTIBASE $_core]

	# inactive core examination will fail - wait till startup of additional core
	target create $_TARGETNAME.r5.$_core cortex_r4 -dap $_CHIPNAME.dap \
		-dbgbase [lindex $R5_DBGBASE $_core] -ap-num 1 -defer-examine
}

if { $_mcu_r5_cores != 0 } {
	proc mcu_r5_up { args } {
		foreach { _core } [set args] {
			set _core [expr {$_core + $::_mcu_base_core_id}]
			$::_TARGETNAME.r5.$_core arp_examine
			$::_TARGETNAME.r5.$_core cortex_r4 dbginit
		}
	}
}

if { $_main0_r5_cores != 0 } {
	proc main0_r5_up { args } {
		foreach { _core } [set args] {
			set _core [expr {$_core + $::_main0_base_core_id}]
			$::_TARGETNAME.r5.$_core arp_examine
			$::_TARGETNAME.r5.$_core cortex_r4 dbginit
		}
	}
}

if { $_main1_r5_cores != 0 } {
	proc main1_r5_up { args } {
		foreach { _core } [set args] {
			set _core [expr {$_core + $::_main1_base_core_id}]
			$::_TARGETNAME.r5.$_core arp_examine
			$::_TARGETNAME.r5.$_core cortex_r4 dbginit
		}
	}
}

if { $_mcu_m4_cores != 0 } {
	cti create $_CTINAME.m4 -dap $_CHIPNAME.dap -ap-num 8 -baseaddr [lindex $CM4_CTIBASE 0]
	target create $_TARGETNAME.m4 cortex_m -dap $_CHIPNAME.dap -ap-num 8 -defer-examine
	$_TARGETNAME.m4 configure -event reset-assert { }

	proc m4_up { args } {
		# To access M4, we need to enable the JTAG access for the same.
		# Ensure Power-AP unlocked
		$::_CHIPNAME.dap apreg 3 [lindex $::_m4_ap_unlock_offsets 0] 0x00190000
		$::_CHIPNAME.dap apreg 3 [lindex $::_m4_ap_unlock_offsets 1] 0x00102098

		$::_TARGETNAME.m4 arp_examine
	}
}