interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/luminary-icdi.cfg

22 lines
820 B
INI
Raw Normal View History

Marcel Jost <marcel.jost@bfh.ch>: This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 04:09:30 -05:00
#
# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
# In-Circuit Debug Interface (ICDI) Board
#
Luminary-icdi comment update Clarify that ICDI is the generic logic, but this config is for the JTAG-only (no-SWD) mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-03 20:29:05 -05:00
# Essentially all Luminary debug hardware is the same, (with both
# JTAG and SWD support compatible with ICDI boards. This ICDI adapter
# configuration is JTAG-only, but the same hardware handles SWD too.
#
Fix Luminary FT2232 layout docs/configs Most of this patch updates documentation and comments for various Luminary boards, supporting two bug fixes by helping to make sense of the current mess: - Recent rev C lm3s811 eval boards didn't work. They must use the ICDI layout, which sets up some signals that the older boards didn't need. This is actually safe and appropriate for *all* recent boards ... so just make "luminary.cfg" use the ICDI layout. - "luminary-lm3s811.cfg", was previously unusable! No VID/PID; and the wrong vendor string. Make it work, but reserve it for older boards where the ICDI layout is wrong. - Default the LM3748 eval board to "luminary.cfg", like the other boards. If someone uses an external JTAG adapter, all boards will use the same workaround (override that default). The difference between the two FT2232 layouts is that eventually the EVB layout will fail cleanly when asked to enable SWO trace, but the ICDI layout will as cleanly be able to enable it. Folk using "luminary.cfg" with Rev B boards won't see anything going wrong until SWO support is (someday) added. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 14:59:47 -06:00
# This is a discrete FT2232 based debug board which supports ARM's
# JTAG/SWD connectors in both backwards-compatible 20-pin format and
# in the new-style compact 10-pin. There's also an 8-pin connector
# with serial port support. It's included with LM3S9B9x eval boards.
#
Marcel Jost <marcel.jost@bfh.ch>: This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 04:09:30 -05:00
# http://www.luminarymicro.com/products/ek-lm3s9b90.html
# http://www.luminarymicro.com/products/ek-lm3s9b92.html
#
interface ft2232
ft2232_device_desc "Luminary Micro ICDI Board"
ft2232_layout luminary_icdi
ft2232_vid_pid 0x0403 0xbcda