riscv-openocd/tcl/board/digilent_zedboard.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# Digilent Zedboard Rev.C, Rev.D with Xilinx Zynq chip
#
# http://zedboard.com/product/zedboard
#

source [find interface/ftdi/digilent_jtag_smt2.cfg]

reset_config srst_only srst_push_pull

source [find target/zynq_7000.cfg]
tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board \| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> 2022-06-12 16:48:05 -05:00			`# SPDX-License-Identifier: GPL-2.0-or-later`

tcl: add Zynq-7000 target and Zedboard board configs Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1 Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2061 Tested-by: jenkins 2014-03-21 11:43:04 -05:00			`#`
			`# Digilent Zedboard Rev.C, Rev.D with Xilinx Zynq chip`
			`#`
			`# http://zedboard.com/product/zedboard`
			`#`

			`source [find interface/ftdi/digilent_jtag_smt2.cfg]`

			`reset_config srst_only srst_push_pull`

			`source [find target/zynq_7000.cfg]`