interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/ftdi/imx8mp-evk.cfg

31 lines
929 B
INI
Raw Normal View History

tcl/interface: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/interface | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7029 Tested-by: jenkins
2022-06-12 16:50:59 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-31 17:53:35 -06:00
#
# Configuration file for NXP MC-IMX8MP-EVK on-board internal JTAG
#
# Using this interface requires enabling "remote mode" for the board using the
# NXP bcu tool (see https://github.com/NXPmicro/bcu)
#
# bcu set_gpio remote_en 1 -board=imx8mpevk
#
# The REMOTE_EN gpio is accessible through the same FTDI adapter but it's
# behind an I2C GPIO expander.
#
adapter driver ftdi
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi vid_pid 0x0403 0x6011
ftdi channel 0
tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-31 17:53:35 -06:00
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_init 0x00f8 0x000b
tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-31 17:53:35 -06:00
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal RESET_B -data 0x0010 -oe 0x0010
tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-31 17:53:35 -06:00
# Called SYS_nRST in schematics
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
ftdi layout_signal IO_nRST -data 0x0040 -oe 0x0040
ftdi layout_signal ONOFF_B -data 0x0080 -oe 0x0080
tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-31 17:53:35 -06:00
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal GPIO1 -data 0x0100 -oe 0x0100
ftdi layout_signal GPIO2 -data 0x0200 -oe 0x0200
ftdi layout_signal GPIO3 -data 0x0400 -oe 0x0400
ftdi layout_signal GPIO4 -data 0x0800 -oe 0x0800