interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/src/Makefile.am

97 lines
2.0 KiB
Makefile
Raw Normal View History

Charles Hardin ckhardin at gmail.com bin2char does not need to be installed as part of openocd git-svn-id: svn://svn.berlios.de/openocd/trunk@816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17 01:21:29 -05:00
bin_PROGRAMS = openocd
reduce compare noise. If someone should be crazy enough to try to run OpenOCD under eCos, then they'v got some hooks to point them in the general direction. git-svn-id: svn://svn.berlios.de/openocd/trunk@499 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11 16:32:03 -05:00
if ECOSBOARD
MAINFILE = ecosboard.c
else
Charles Hardin <ckhardin@gmail.com> move jim into helper git-svn-id: svn://svn.berlios.de/openocd/trunk@822 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17 12:34:53 -05:00
MAINFILE = main.c
reduce compare noise. If someone should be crazy enough to try to run OpenOCD under eCos, then they'v got some hooks to point them in the general direction. git-svn-id: svn://svn.berlios.de/openocd/trunk@499 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11 16:32:03 -05:00
endif
Charles Hardin <ckhardin@gmail.com> move jim into helper git-svn-id: svn://svn.berlios.de/openocd/trunk@822 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17 12:34:53 -05:00
openocd_SOURCES = $(MAINFILE) openocd.c
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
# set the include path found by configure
- retired variable stuff. - drscan is now a low level tcl command: execute DR scan <device> <num_bits> <value> <num_bits1> <value2> - removed obsolete partial command text support git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11 07:17:56 -05:00
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/helper \
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
-I$(top_srcdir)/src/jtag -I$(top_srcdir)/src/target -I$(top_srcdir)/src/xsvf -I$(top_srcdir)/src/server \
- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22 07:03:10 -06:00
-I$(top_srcdir)/src/flash -I$(top_srcdir)/src/pld $(all_includes)
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
Changed openocd version info creation to be more useful. - Now displays subversion revision and svn URL git-svn-id: svn://svn.berlios.de/openocd/trunk@220 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-10 10:55:14 -06:00
# pass path to prefix path
openocd_CPPFLAGS = \
-DPKGLIBDIR=\"$(pkglibdir)\" \
-DPKGBLDDATE=\"`date +%F-%R`\" \
-DPKGBLDREV=\"`$(top_srcdir)/guess-rev.sh`\" \
@CPPFLAGS@
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
# the library search path.
openocd_LDFLAGS = $(all_libraries)
- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22 07:03:10 -06:00
SUBDIRS = helper jtag xsvf target server flash pld
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
- Added support for native MinGW builds (thanks to Spencer Oliver and Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17 09:13:27 -05:00
if IS_MINGW
MINGWLDADD = -lwsock32
else
MINGWLDADD =
endif
- added support for FreeBSD ppi (parallel port access similar to /dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-11 12:49:41 -05:00
if FT2232_LIBFTDI
- add -lusb to link for using libftdi under win32 git-svn-id: svn://svn.berlios.de/openocd/trunk@635 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-01 14:31:13 -05:00
FTDI2232LIB = -lftdi -lusb
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
else
- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14 04:48:54 -05:00
if PRESTO_LIBFTDI
- add -lusb to link for using libftdi under win32 git-svn-id: svn://svn.berlios.de/openocd/trunk@635 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-01 14:31:13 -05:00
FTDI2232LIB = -lftdi -lusb
- corrected automake script git-svn-id: svn://svn.berlios.de/openocd/trunk@195 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14 05:05:40 -05:00
else
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
FTDI2232LIB =
endif
- corrected automake script git-svn-id: svn://svn.berlios.de/openocd/trunk@195 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14 05:05:40 -05:00
endif
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
if USBPROG
LIBUSB = -lusb
else
- added jlink support, based on Jürgen Stuber patch git-svn-id: svn://svn.berlios.de/openocd/trunk@658 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-14 09:13:38 -05:00
if JLINK
LIBUSB = -lusb
else
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
LIBUSB =
endif
- added jlink support, based on Jürgen Stuber patch git-svn-id: svn://svn.berlios.de/openocd/trunk@658 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-14 09:13:38 -05:00
endif
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
- Added support for native MinGW builds (thanks to Spencer Oliver and Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17 09:13:27 -05:00
if IS_WIN32
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
if FTD2XXDIR
FTD2XXLDADD = @WITH_FTD2XX@/FTD2XX.lib
else
FTD2XXLDADD = -lftd2xx
endif
else
FTD2XXLDADD = -lftd2xx
endif
- added support for FreeBSD ppi (parallel port access similar to /dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-11 12:49:41 -05:00
if FT2232_FTD2XX
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
FTD2XXLIB = $(FTD2XXLDADD)
else
- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14 04:48:54 -05:00
if PRESTO_FTD2XX
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
FTD2XXLIB = $(FTD2XXLDADD)
else
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
FTD2XXLIB =
endif
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
endif
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
Charles Hardin <ckhardin@gmail.com> - hopefully final word on startup.tcl => c conversion git-svn-id: svn://svn.berlios.de/openocd/trunk@803 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-13 12:31:40 -05:00
openocd_LDADD = $(top_builddir)/src/xsvf/libxsvf.a \
- prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 05:36:31 -05:00
$(top_builddir)/src/target/libtarget.a $(top_builddir)/src/jtag/libjtag.a \
$(top_builddir)/src/helper/libhelper.a \
$(top_builddir)/src/server/libserver.a $(top_builddir)/src/helper/libhelper.a \
$(top_builddir)/src/flash/libflash.a $(top_builddir)/src/target/libtarget.a \
- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22 07:03:10 -06:00
$(top_builddir)/src/pld/libpld.a \
- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15 06:19:33 -05:00
$(FTDI2232LIB) $(FTD2XXLIB) $(MINGWLDADD) $(LIBUSB)
Jim Tcl support added git-svn-id: svn://svn.berlios.de/openocd/trunk@739 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04 01:31:43 -05:00
src/helper/configuration.h - Log output handlers now get a "const char *line" - Added "const" to parameter. src/helper/command.c src/helper/command.h - New function: 'command_output_text()' - Log output handlers now get a "const char *line" src/helper/options.c - Log output handlers now get a "const char *line" src/server/telnet_server.c - DO not transmit NULL bytes via TELNET. - Log output handlers now get a "const char *line" src/server/gdb_server.c - Log output handlers now get a "const char *line" *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.c *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.h *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/openocd.c - **MAJOR** Work: New TCL/Jim function: mem2array - **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users. - Previously: TCL output did not go to GDB. - Previously: TCL output did not go to TELNET - Previously: TCL output only goes to control console. - This fixes that problem. + Created callbacks: +openocd_jim_fwrite() +openocd_jim_fread() +openocd_jim_vfprintf() +openocd_jim_fflush() +openocd_jim_fgets() src/Makefile.am - New TCL files. - Future note: This should be more automated. As the list of 'tcl' files grows maintaning this list will suck. src/Jim.c - ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER ** - that impliments many [format] specifies JIM did not support. - Jim_FormatString() - **MAJOR** work. - Previously only supported "%s" "%d" and "%c" - And what support existed had bugs. - NEW: *MANY* formating parameters are now supported. - TODO: The "precision" specifier is not supported. ** NEW ** This patch. - Jim_StringToWide() test if no conversion occured. - Jim_StringToIndex() test if no conversion occured. - Jim_StringToDouble() test if no conversion occured. ** NEW ** This Patch. Major Work. - Previously output from JIM did not get sent to GDB - Ditto: Output to Telnet session. - Above items are now fixed - By introducing callbacks new function pointers in the "interp" structure. - Helpers that call the callbacks. - New function: Jim_fprintf() - New function: Jim_vfprintf() - New function: Jim_fwrite() - New function: Jim_fread() - New function: Jim_fflush() - New function: Jim_fgets() By default: the output is to STDIO as previous. The "openocd.c" - redirects the output as needed. - Jim_Panic() - Send panic to both STDERR and the interps specified STDERR output as a 2nd choice. - Now JIM's "stdin/stdout/stderr" paramters are "void *" and are no longer "FILE *". src/Jim.h - **MAJOR** - New JIM STDIO callbacks in the "interp" structure. - change: "stdin/stdout/stderr" are now "void *" cookies. - New JIM stdio helper functions. git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-06 14:17:43 -05:00
nobase_dist_pkglib_DATA = \
tcl/bitsbytes.tcl \
tcl/chip/atmel/at91/aic.tcl \
tcl/chip/atmel/at91/at91sam7x128.tcl \
tcl/chip/atmel/at91/at91sam7x256.tcl \
tcl/chip/atmel/at91/pmc.tcl \
tcl/chip/atmel/at91/rtt.tcl \
tcl/chip/atmel/at91/usarts.tcl \
tcl/cpu/arm/arm7tdmi.tcl \
tcl/cpu/arm/arm920.tcl \
tcl/cpu/arm/arm946.tcl \
tcl/cpu/arm/arm966.tcl \
tcl/memory.tcl \
tcl/mmr_helpers.tcl \
tcl/readable.tcl