interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/ftdi/minimodule.cfg

19 lines
536 B
INI
Raw Normal View History

tcl/interface: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/interface | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7029 Tested-by: jenkins
2022-06-12 16:50:59 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
cfg: Add config file variants using the ftdi driver instead of ft2232 part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-07-19 02:32:04 -05:00
#
# FTDI MiniModule
#
# http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
#
tcl: replace command "interface" with "adapter driver" Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:49:58 -05:00
adapter driver ftdi
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi device_desc "FT2232H MiniModule"
ftdi vid_pid 0x0403 0x6010
cfg: Add config file variants using the ftdi driver instead of ft2232 part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-07-19 02:32:04 -05:00
tcl/interface/ftdi: improve minimodule config - Tested on a real FT2232H MiniModule, so warning removed. - Every pin initially set to high impedance except TCK, TDI, TDO and TMS: Safest values given it's an evaluation board and the rest of pins might be connected to something else. - Reset is now initially de-asserted (it was asserted which is not recommended). - nRST pin choice is arbitrary so comment added (wondering if it should be an "echo"). - "-oe" option added to NRST signal so it can be set as high impedance (tri-stated). Change-Id: I967ab0c7bbccf72dbf6d6d78b3180b74e016e0d6 Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com> Reviewed-on: http://openocd.zylin.com/4185 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-08-03 01:37:41 -05:00
# Every pin set as high impedance except TCK, TDI, TDO and TMS
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_init 0x0008 0x000b
tcl/interface/ftdi: improve minimodule config - Tested on a real FT2232H MiniModule, so warning removed. - Every pin initially set to high impedance except TCK, TDI, TDO and TMS: Safest values given it's an evaluation board and the rest of pins might be connected to something else. - Reset is now initially de-asserted (it was asserted which is not recommended). - nRST pin choice is arbitrary so comment added (wondering if it should be an "echo"). - "-oe" option added to NRST signal so it can be set as high impedance (tri-stated). Change-Id: I967ab0c7bbccf72dbf6d6d78b3180b74e016e0d6 Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com> Reviewed-on: http://openocd.zylin.com/4185 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-08-03 01:37:41 -05:00
# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
# This choice is arbitrary. Use other GPIO pin if desired.
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020