interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/target/hi3798.cfg

54 lines
1.4 KiB
INI
Raw Normal View History

tcl/target: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/ target| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7027 Tested-by: jenkins
2022-06-12 16:42:27 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl: add hi3798 target and Tocoding Poplar board config This config covers the 4x Cortex A53 CPUs. A custom connector is required from J14 to standard ARM JTAG on v1 boards. However v2 hardware should have a standard FTSH-105-01-L-DV connector. Pinmuxing code to enable JTAG pins is included in l-loader-poplar repository, so board is flashed with open source code, JTAG is available at very early boot. Alternatively the following pokes can be issued from U-Boot to enable JTAG (e.g. to debug hisilicon SDK). mw 0xf8a210ec 0x130; mw 0xf8a210f0 0x130; mw 0xf8a210f4 0x130; mw 0xf8a210f8 0x130; mw 0xf8a210fc 0x130; mw 0xf8a21100 0x130; Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-on: http://openocd.zylin.com/4161 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-06-12 10:28:03 -05:00
# Hisilicon Hi3798 Target
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME hi3798
}
#
# Main DAP
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x5ba00477
}
# declare the one JTAG tap to access the DAP
target: restructure dap support - add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-23 15:17:29 -05:00
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -ignore-version -enable
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
tcl: add hi3798 target and Tocoding Poplar board config This config covers the 4x Cortex A53 CPUs. A custom connector is required from J14 to standard ARM JTAG on v1 boards. However v2 hardware should have a standard FTSH-105-01-L-DV connector. Pinmuxing code to enable JTAG pins is included in l-loader-poplar repository, so board is flashed with open source code, JTAG is available at very early boot. Alternatively the following pokes can be issued from U-Boot to enable JTAG (e.g. to debug hisilicon SDK). mw 0xf8a210ec 0x130; mw 0xf8a210f0 0x130; mw 0xf8a210f4 0x130; mw 0xf8a210f8 0x130; mw 0xf8a210fc 0x130; mw 0xf8a21100 0x130; Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-on: http://openocd.zylin.com/4161 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-06-12 10:28:03 -05:00
# declare the 4 main application cores
set _TARGETNAME $_CHIPNAME.cpu
set _smp_command ""
set $_TARGETNAME.cti(0) 0x80020000
set $_TARGETNAME.cti(1) 0x80120000
set $_TARGETNAME.cti(2) 0x80220000
set $_TARGETNAME.cti(3) 0x80320000
set _cores 4
for { set _core 0 } { $_core < $_cores } { incr _core 1 } {
tcl: replace '-ctibase' with '-baseaddr' Replace the deprecated option '-ctibase' with the generic option '-baseaddr'. Change generated with command: sed -i 's/-ctibase/-baseaddr/g' $(find tcl/ -type f) Change-Id: If776934d2ac106532708768bb3a4ec6fcffb0368 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5870 Tested-by: jenkins
2020-10-17 12:25:50 -05:00
cti create cti$_core -dap $_CHIPNAME.dap -baseaddr [set $_TARGETNAME.cti($_core)] -ap-num 0
arm_cti: add cti command group Extend the CTI abstraction to be accessible from TCL and change the 'target' command to accept a cti 'object' instead of a base address. This also allows accessing CTI instances that are not related to a configured target. Change-Id: Iac9ed0edca6f1be00fe93783a35c26077f6bc80a Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4031 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2017-04-10 15:53:27 -05:00
tcl: add hi3798 target and Tocoding Poplar board config This config covers the 4x Cortex A53 CPUs. A custom connector is required from J14 to standard ARM JTAG on v1 boards. However v2 hardware should have a standard FTSH-105-01-L-DV connector. Pinmuxing code to enable JTAG pins is included in l-loader-poplar repository, so board is flashed with open source code, JTAG is available at very early boot. Alternatively the following pokes can be issued from U-Boot to enable JTAG (e.g. to debug hisilicon SDK). mw 0xf8a210ec 0x130; mw 0xf8a210f0 0x130; mw 0xf8a210f4 0x130; mw 0xf8a210f8 0x130; mw 0xf8a210fc 0x130; mw 0xf8a21100 0x130; Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-on: http://openocd.zylin.com/4161 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-06-12 10:28:03 -05:00
set _command "target create ${_TARGETNAME}$_core aarch64 \
target: restructure dap support - add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-23 15:17:29 -05:00
-dap $_CHIPNAME.dap -coreid $_core -cti cti$_core"
tcl: add hi3798 target and Tocoding Poplar board config This config covers the 4x Cortex A53 CPUs. A custom connector is required from J14 to standard ARM JTAG on v1 boards. However v2 hardware should have a standard FTSH-105-01-L-DV connector. Pinmuxing code to enable JTAG pins is included in l-loader-poplar repository, so board is flashed with open source code, JTAG is available at very early boot. Alternatively the following pokes can be issued from U-Boot to enable JTAG (e.g. to debug hisilicon SDK). mw 0xf8a210ec 0x130; mw 0xf8a210f0 0x130; mw 0xf8a210f4 0x130; mw 0xf8a210f8 0x130; mw 0xf8a210fc 0x130; mw 0xf8a21100 0x130; Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-on: http://openocd.zylin.com/4161 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-06-12 10:28:03 -05:00
if { $_core != 0 } {
# non-boot core examination may fail
#set _command "$_command -defer-examine"
set _smp_command "$_smp_command ${_TARGETNAME}$_core"
} else {
# uncomment when "hawt" rtos is merged
# set _command "$_command -rtos hawt"
set _smp_command "target smp ${_TARGETNAME}$_core"
}
eval $_command
}
eval $_smp_command