interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/chip/st/spear/spear3xx_ddr.tcl

128 lines
4.8 KiB
Tcl
Raw Normal View History

TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# Init scripts to configure DDR controller of SPEAr3xx
# http://www.st.com/spear
# Original values taken from XLoader source code
#
# Date: 2010-09-23
# Author: Antonio Borneo <borneo.antonio@gmail.com>
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
proc sp3xx_ddr_init {ddr_type {ddr_chips 1}} {
if { $ddr_chips != 1 && $ddr_chips != 2 } {
error "Only 1 or 2 DDR chips permitted. Wrong value "$ddr_chips
}
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
if { $ddr_type == "mt47h64m16_3_333_cl5_async" } {
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
ddr_spr3xx_mt47h64m16_3_333_cl5_async $ddr_chips
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
set ddr_size 0x08000000
## add here new DDR chip definition. Prototype:
#} elseif { $ddr_type == "?????" } {
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
# ????? $ddr_chips
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# set ddr_size 0x?????
} else {
error "sp3xx_ddr_init: unrecognized DDR type "$ddr_type
}
TCL/SPEAr: move DDR activation in common code DDR controller activation should not be in DDR chip specific code, but in generic DDR controller part. Change-Id: If1b178228352b48b0097d7b9b300005fb5bb4fb6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/228 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 21:46:59 -06:00
# MPMC START
mww 0xfc60001c 0x01000100
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
if { $ddr_chips == 2 } {
TCL scripts: replace "puts" with "echo" Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-08 03:23:49 -06:00
echo [format \
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
"Double chip DDR memory. Total memory size 0x%08x byte" \
[expr 2 * $ddr_size]]
} else {
TCL scripts: replace "puts" with "echo" Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-08 03:23:49 -06:00
echo [format \
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
"Single chip DDR memory. Memory size 0x%08x byte" \
$ddr_size]
}
}
# from Xloader file ddr/spr300_mt47h64m16_3_333_cl5_async.S
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
proc ddr_spr3xx_mt47h64m16_3_333_cl5_async {ddr_chips} {
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
# DDR_PAD_REG
mww 0xfca800f0 0x00003aa5
# Use "1:2 sync" only when DDR clock source is PLL1 and
# HCLK is half of PLL1
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600000 0x00000001 ;# MEMCTL_AHB_SET_00 # This is async
mww 0xfc600004 0x00000000 ;# MEMCTL_AHB_SET_01
# mww 0xfc600000 0x02020201 ;# MEMCTL_AHB_SET_00 # This is 1:2 sync
# mww 0xfc600004 0x02020202 ;# MEMCTL_AHB_SET_01
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600008 0x01000000 ;# MEMCTL_RFSH_SET_00
mww 0xfc60000c 0x00000101 ;# MEMCTL_DLL_SET_00
mww 0xfc600010 0x00000101 ;# MEMCTL_GP_00
mww 0xfc600014 0x01000000 ;# MEMCTL_GP_01
mww 0xfc600018 0x00010001 ;# MEMCTL_GP_02
mww 0xfc60001c 0x00000100 ;# MEMCTL_GP_03
mww 0xfc600020 0x00010001 ;# MEMCTL_GP_04
TCL/SPEAr: remove code to autodetect DDR The code to autodetect DDR was wrong and not complete. Replaced with a parameter passed to TCL proc. Split DDR configuration in the two cases of single and dual DDR chip, using single chip as default. Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/229 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-20 22:20:18 -06:00
if { $ddr_chips == 2 } {
mww 0xfc600024 0x01020203 ;# MEMCTL_GP_05
mww 0xfc600028 0x01000102 ;# MEMCTL_GP_06
mww 0xfc60002c 0x02000202 ;# MEMCTL_AHB_SET_02
} else {
mww 0xfc600024 0x00000201 ;# MEMCTL_GP_05
mww 0xfc600028 0x02000001 ;# MEMCTL_GP_06
mww 0xfc60002c 0x02000201 ;# MEMCTL_AHB_SET_02
}
TCL: fix non TCL comments End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 11:22:53 -06:00
mww 0xfc600030 0x04040105 ;# MEMCTL_AHB_SET_03
mww 0xfc600034 0x03030302 ;# MEMCTL_AHB_SET_04
mww 0xfc600038 0x02040101 ;# MEMCTL_AHB_SET_05
mww 0xfc60003c 0x00000002 ;# MEMCTL_AHB_SET_06
mww 0xfc600044 0x03000405 ;# MEMCTL_DQS_SET_0
mww 0xfc600048 0x03040002 ;# MEMCTL_TIME_SET_01
mww 0xfc60004c 0x04000305 ;# MEMCTL_TIME_SET_02
mww 0xfc600050 0x0505053f ;# MEMCTL_AHB_RELPR_00
mww 0xfc600054 0x05050505 ;# MEMCTL_AHB_RELPR_01
mww 0xfc600058 0x04040405 ;# MEMCTL_AHB_RELPR_02
mww 0xfc60005c 0x04040404 ;# MEMCTL_AHB_RELPR_03
mww 0xfc600060 0x03030304 ;# MEMCTL_AHB_RELPR_04
mww 0xfc600064 0x03030303 ;# MEMCTL_AHB_RELPR_05
mww 0xfc600068 0x02020203 ;# MEMCTL_AHB_RELPR_06
mww 0xfc60006c 0x02020202 ;# MEMCTL_AHB_RELPR_07
mww 0xfc600070 0x01010102 ;# MEMCTL_AHB_RELPR_08
mww 0xfc600074 0x01010101 ;# MEMCTL_AHB_RELPR_09
mww 0xfc600078 0x00000001 ;# MEMCTL_AHB_RELPR_10
mww 0xfc600088 0x0a0c0a00 ;# MEMCTL_DQS_SET_1
mww 0xfc60008c 0x0000023f ;# MEMCTL_GP_07
mww 0xfc600090 0x00050a00 ;# MEMCTL_GP_08
mww 0xfc600094 0x11000000 ;# MEMCTL_GP_09
mww 0xfc600098 0x00001302 ;# MEMCTL_GP_10
mww 0xfc60009c 0x00001c1c ;# MEMCTL_DLL_SET_01
mww 0xfc6000a0 0x7c000000 ;# MEMCTL_DQS_OUT_SHIFT
mww 0xfc6000a4 0x005c0000 ;# MEMCTL_WR_DQS_SHIFT
mww 0xfc6000a8 0x2b050e00 ;# MEMCTL_TIME_SET_03
mww 0xfc6000ac 0x00640064 ;# MEMCTL_AHB_PRRLX_00
mww 0xfc6000b0 0x00640064 ;# MEMCTL_AHB_PRRLX_01
mww 0xfc6000b4 0x00000064 ;# MEMCTL_AHB_PRRLX_02
mww 0xfc6000b8 0x00000000 ;# MEMCTL_OUTRANGE_LGTH
mww 0xfc6000bc 0x00200020 ;# MEMCTL_AHB_RW_SET_00
mww 0xfc6000c0 0x00200020 ;# MEMCTL_AHB_RW_SET_01
mww 0xfc6000c4 0x00200020 ;# MEMCTL_AHB_RW_SET_02
mww 0xfc6000c8 0x00200020 ;# MEMCTL_AHB_RW_SET_03
mww 0xfc6000cc 0x00200020 ;# MEMCTL_AHB_RW_SET_04
mww 0xfc6000d8 0x00000a24 ;# MEMCTL_TREF
mww 0xfc6000dc 0x00000000 ;# MEMCTL_EMRS3_DATA
mww 0xfc6000e0 0x5b1c00c8 ;# MEMCTL_TIME_SET_04
mww 0xfc6000e4 0x00c8002e ;# MEMCTL_TIME_SET_05
mww 0xfc6000e8 0x00000000 ;# MEMCTL_VERSION
mww 0xfc6000ec 0x0001046b ;# MEMCTL_TINIT
mww 0xfc6000f0 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_01
mww 0xfc6000f4 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_02
mww 0xfc600104 0x001c0000 ;# MEMCTL_DLL_DQS_DELAY_BYPASS_0
mww 0xfc600108 0x0019001c ;# MEMCTL_DLL_SET_02
mww 0xfc60010c 0x00100000 ;# MEMCTL_DLL_SET_03
mww 0xfc600110 0x001e007a ;# MEMCTL_DQS_SET_2
mww 0xfc600188 0x00000000 ;# MEMCTL_USER_DEF_REG_0
mww 0xfc60018c 0x00000000 ;# MEMCTL_USER_DEF_REG_1
mww 0xfc600190 0x01010001 ;# MEMCTL_GP_11
mww 0xfc600194 0x01000000 ;# MEMCTL_GP_12
mww 0xfc600198 0x00000001 ;# MEMCTL_GP_13
mww 0xfc60019c 0x00400000 ;# MEMCTL_GP_14
mww 0xfc6001a0 0x00000000 ;# MEMCTL_EMRS2_DATA_X
mww 0xfc6001a4 0x00000000 ;# MEMCTL_LWPWR_CNT
mww 0xfc6001a8 0x00000000 ;# MEMCTL_LWPWR_REG
mww 0xfc6001ac 0x00860000 ;# MEMCTL_GP_15
mww 0xfc6001b0 0x00000002 ;# MEMCTL_TPDEX
TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-04 03:53:28 -05:00
}