interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/ftdi/c232hm.cfg

59 lines
2.1 KiB
INI
Raw Normal View History

tcl/interface: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/interface | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7029 Tested-by: jenkins
2022-06-12 16:50:59 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
interface: adapter configuration for FTDI C232HM This patch adds support for the C232HM-DDSL-0 and C232HM-EDSL-0 FT232H-based cables from FTDI. For more information, see: http://www.ftdichip.com/Products/Cables/USBMPSSE.htm Change-Id: Ic97423eb1e2f6b5ebae04943cd5cce86f38771d5 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4081 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2017-03-26 10:47:34 -05:00
# FTDI USB Hi-Speed to MPSSE Cable
#
# http://www.ftdichip.com/Products/Cables/USBMPSSE.htm
#
# C232HM-DDHSL-0 and C232HM-EDSL-0 provide 3.3V and 5V on pin 1 (Red),
# respectively.
#
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# Adapter: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_C232HM_MPSSE_CABLE.PDF
# Chip: http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf
# See pinout/colors at end of this file.
#
# Tech notes:
# http://www.ftdichip.com/Support/Documents/AppNotes/AN_135_MPSSE_Basics.pdf
# http://www.ftdichip.com/Support/Documents/AppNotes/AN_129_FTDI_Hi_Speed_USB_To_JTAG_Example.pdf
interface: adapter configuration for FTDI C232HM This patch adds support for the C232HM-DDSL-0 and C232HM-EDSL-0 FT232H-based cables from FTDI. For more information, see: http://www.ftdichip.com/Products/Cables/USBMPSSE.htm Change-Id: Ic97423eb1e2f6b5ebae04943cd5cce86f38771d5 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4081 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2017-03-26 10:47:34 -05:00
tcl: replace command "interface" with "adapter driver" Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:49:58 -05:00
adapter driver ftdi
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
#ftdi device_desc "C232HM-DDHSL-0"
#ftdi device_desc "C232HM-EDHSL-0"
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# Common PID for FT232H
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi vid_pid 0x0403 0x6014
interface: adapter configuration for FTDI C232HM This patch adds support for the C232HM-DDSL-0 and C232HM-EDSL-0 FT232H-based cables from FTDI. For more information, see: http://www.ftdichip.com/Products/Cables/USBMPSSE.htm Change-Id: Ic97423eb1e2f6b5ebae04943cd5cce86f38771d5 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4081 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2017-03-26 10:47:34 -05:00
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# Layout
# High data byte 0x40 configures red LED on ACBUS6 initially high (unlit, since active-low)
# Low data byte 0x08 configures TMS on ACBUS3 initially high (asserted); TCK, TDI low
# High direction byte 0x40 configures red LED on ACBUS6 as high (output)
# Low direction byte 0x0b configures TDO on ACBUS2 as low (input)
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_init 0x4008 0x400b
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# ---A*BUS-------CCCCCCCC|DDDDDDDD
# --------\______76543210|76543210
# LED 0x4000 = 01000000|00000000 = ACBUS6
#GPIOL0 0x0010 = 00000000|00010000 = ADBUS4
#GPIOL1 0x0020 = 00000000|00100000 = ADBUS5
#GPIOL2 0x0040 = 00000000|01000000 = ADBUS6
#GPIOL3 0x0080 = 00000000|10000000 = ADBUS7
# -ndata treats the LED as active-low for expected behavior (toggle when transferring)
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal LED -ndata 0x4000
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# Available for aliasing as desired
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal GPIOL0 -data 0x0010 -oe 0x0010
ftdi layout_signal GPIOL1 -data 0x0020 -oe 0x0020
ftdi layout_signal GPIOL2 -data 0x0040 -oe 0x0040
ftdi layout_signal GPIOL3 -data 0x0080 -oe 0x0080
Update FTDI C232HM cfg, and add two new cfgs from cable modem research Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-26 00:39:05 -05:00
# C232HM FT232H JTAG/Other
# Num Color Name Func
# 1 Red VCC Optionally, can power the board if it is not using its own power supply.
# 2 Orange ADBUS0 TCK
# 3 Yellow ADBUS1 TDI
# 4 Green ADBUS2 TDO
# 5 Brown ADBUS3 TMS
# 6 Grey ADBUS4 GPIOL0
# 7 Purple ADBUS5 GPIOL1
# 8 White ADBUS6 GPIOL2
# 9 Blue ADBUS7 GPIOL3
# 10 Black GND Connect to ground