interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/doc/usb_adapters/angie/584e_424e_angie.txt

108 lines
3.7 KiB
Plaintext
Raw Normal View History

contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
Bus 001 Device 029: ID 584e:424e NanoXplore, SAS. ANGIE Adapter
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
bMaxPacketSize0 64
idVendor 0x584e
idProduct 0x424e
bcdDevice 0.00
iManufacturer 1 NanoXplore, SAS.
iProduct 2 ANGIE Adapter
iSerial 3 000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
wTotalLength 0x0047
bNumInterfaces 2
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
bConfigurationValue 1
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
iConfiguration 1 NanoXplore, SAS.
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 1
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 0
bFunctionProtocol 0
iFunction 0
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 JTAG Adapter
contrib/firmware: add new adapter ANGIE's firmware/bitstream code This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-16 16:19:05 -05:00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
contrib/firmware: add new i2c bit-banging feature to angie's firmware add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-16 10:05:05 -05:00
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0