riscv-openocd/tcl/board/xmc4800-relax.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# Infineon XMC4800 Relax EtherCAT Kit
#

#
# Segger J-Link Lite XMC4200 on-board
#
source [find interface/jlink.cfg]
transport select swd

# There's also an unpopulated 10-pin 0.05" pinout.

set CHIPNAME xmc4800
source [find target/xmc4xxx.cfg]

# N25Q032A qSPI flash
tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board \| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> 2022-06-12 16:48:05 -05:00			`# SPDX-License-Identifier: GPL-2.0-or-later`

tcl/board: Add Infineon XMC4800 Relax EtherCAT Kit config Tested with "J-Link Lite-XMC4200 Rev.1 compiled Oct 14 2015 10:14:50". Derived from xmc4500-relax.cfg. Change-Id: Ia1edf5cb95088ccd34e3b90570d727bbb401cbf5 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3129 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> 2015-11-28 13:48:32 -06:00			`#`
			`# Infineon XMC4800 Relax EtherCAT Kit`
			`#`

			`#`
			`# Segger J-Link Lite XMC4200 on-board`
			`#`
			`source [find interface/jlink.cfg]`
			`transport select swd`

			`# There's also an unpopulated 10-pin 0.05" pinout.`

			`set CHIPNAME xmc4800`
			`source [find target/xmc4xxx.cfg]`

			`# N25Q032A qSPI flash`