riscv-openocd/tcl/board/kwikstik.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# Freescale KwikStik development board
#

#
# JLINK interface is onboard
#
source [find interface/jlink.cfg]

source [find target/k40.cfg]

reset_config trst_and_srst
tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board \| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> 2022-06-12 16:48:05 -05:00			`# SPDX-License-Identifier: GPL-2.0-or-later`

add Freescale Kinetis K40 devices and Kwikstik eval board Change-Id: I4817921d09ab915c50f42651bc073690033450fe Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/51 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> 2011-10-22 11:00:20 -05:00			`#`
			`# Freescale KwikStik development board`
			`#`

			`#`
			`# JLINK interface is onboard`
			`#`
			`source [find interface/jlink.cfg]`

			`source [find target/k40.cfg]`

			`reset_config trst_and_srst`