riscv-openocd/tcl/target/xmc4xxx.cfg

#
# Infineon XMC4100/XMC4200/XMC4400/XMC4500 family (ARM Cortex-M4 @ 80-120 MHz)
#

if { [info exists CHIPNAME] } {
	set _CHIPNAME $CHIPNAME
} else {
	set _CHIPNAME xmc4000
}

source [find target/swj-dp.tcl]

#
# SWJ-DP
#
if { [info exists CPU_JTAG_TAPID] } {
	set _CPU_JTAG_TAPID $CPU_JTAG_TAPID
} else {
	set _CPU_JTAG_TAPID 0x4BA00477
}

#
# SW_DP
#
if { [info exists CPU_SWD_TAPID] } {
	set _CPU_SWD_TAPID $CPU_SWD_TAPID
} else {
	set _CPU_SWD_TAPID 0x2BA01477
}

if { [using_jtag] } {
	set _CPU_TAPID $_CPU_JTAG_TAPID
} else {
	set _CPU_TAPID $_CPU_SWD_TAPID
}

swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_TAPID

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME

# Work-area is a space in RAM used for flash programming
# By default use 16 kB
if { [info exists WORKAREASIZE] } {
   set _WORKAREASIZE $WORKAREASIZE
} else {
   set _WORKAREASIZE 0x1000
}

$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0

set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME xmc4xxx 0x0C000000 0 0 0 $_TARGETNAME

if { ![using_hla] } {
	cortex_m reset_config sysresetreq
}

adapter_khz 1000