interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/target/ls1088a.cfg

22 lines
352 B
INI
Raw Normal View History

target: Add support for ls1088a The LS1088A is an octo-core aarch64 processor from NXP in the layerscape family. The JTAG is undocumented, but I was able to figure things out from the output of `dap info`. This is the first in-tree example of using the hwthread rtos (as far as I know), so hopefully it can serve as an example to other developers. There are some ETMs, but I was unable to try them out because I got 'invalid command name "etm"' when trying to test things out. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2 Reviewed-on: https://review.openocd.org/c/openocd/+/6848 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-11 16:45:32 -06:00
# SPDX-License-Identifier: GPL-2.0-or-later
# NXP LS1088A
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME ls1088a
}
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x5ba00477
}
tcl/target/ls1088: Break out common configuration Several Layerscape processors (LS1088A, LS2088A, LS2160A, and LS1028A) share a common architecture. Break out the common setup from the LS1088 config in preparation for adding the LS1028A. There's no official name for this series of processors, but NXP refers to them as "chassis generation 3" in U-Boot, so we'll go with that too. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: Ic6f89f95c678101f54579bcaa5d79c5b67ddf50a Reviewed-on: https://review.openocd.org/c/openocd/+/6975 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-13 10:03:41 -05:00
set _CPUS 8
target: Add support for ls1088a The LS1088A is an octo-core aarch64 processor from NXP in the layerscape family. The JTAG is undocumented, but I was able to figure things out from the output of `dap info`. This is the first in-tree example of using the hwthread rtos (as far as I know), so hopefully it can serve as an example to other developers. There are some ETMs, but I was unable to try them out because I got 'invalid command name "etm"' when trying to test things out. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2 Reviewed-on: https://review.openocd.org/c/openocd/+/6848 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-11 16:45:32 -06:00
tcl/target/ls1088: Break out common configuration Several Layerscape processors (LS1088A, LS2088A, LS2160A, and LS1028A) share a common architecture. Break out the common setup from the LS1088 config in preparation for adding the LS1028A. There's no official name for this series of processors, but NXP refers to them as "chassis generation 3" in U-Boot, so we'll go with that too. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: Ic6f89f95c678101f54579bcaa5d79c5b67ddf50a Reviewed-on: https://review.openocd.org/c/openocd/+/6975 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-13 10:03:41 -05:00
source [find target/lsch3_common.cfg]
target: Add support for ls1088a The LS1088A is an octo-core aarch64 processor from NXP in the layerscape family. The JTAG is undocumented, but I was able to figure things out from the output of `dap info`. This is the first in-tree example of using the hwthread rtos (as far as I know), so hopefully it can serve as an example to other developers. There are some ETMs, but I was unable to try them out because I got 'invalid command name "etm"' when trying to test things out. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2 Reviewed-on: https://review.openocd.org/c/openocd/+/6848 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-11 16:45:32 -06:00
# Seems to work OK in testing
adapter speed 10000