interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/ftdi/isodebug.cfg

30 lines
1.1 KiB
INI
Raw Normal View History

tcl/interface: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/interface | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7029 Tested-by: jenkins
2022-06-12 16:50:59 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
# isodebug v1
# 5 kV isolated JTAG/SWD + UART adapter by Unjo AB
adapter driver ftdi
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi vid_pid 0x22b7 0x150d
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_init 0x0ff8 0xfffb
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal LED -ndata 0x0100
ftdi layout_signal nTRST -data 0x0200
ftdi layout_signal nSRST -noe 0x0400
ftdi layout_signal SWDIO_OE -data 0x0008
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
# Mode signals, either of these needs to be high to drive the JTAG/SWD pins.
# The power-on state is low for both signals but the init setting above sets
# JTAG_EN high.
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal SWD_EN -data 0x1000
ftdi layout_signal JTAG_EN -data 0x0800
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
# In SWD mode, the JTAG_EN signal doubles as SWO_EN_N which switches the
# second FTDI channel UART RxD to the SWO pin instead of the separate RxD
# pin. Note that the default init state has this pin high so when OpenOCD
# starts in SWD mode, SWO is by default disabled. To enable SWO tracing,
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
# issue the command 'ftdi set_signal SWO_EN 1' where tracing is configured.
tcl: Add interface config for isodebug isolated JTAG/SWD+UART Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-28 08:45:23 -05:00
# To switch back to using the separate UART, SWO_EN needs to be disabled
# before exiting OpenOCD, or the adapter replugged.
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi layout_signal SWO_EN -nalias JTAG_EN